Texas Instruments

UART Interface IC Universal Asynchronous Receiver/Transmitter with FIFOs 44-PLCC 0 to 70

4-Channel ESD Protection Diode for USB Type-C and HDMI 2.0

Ultra-Low Power Digital-Latch Hall Effect Sensor

Isolated DC/DC Converters Mini 2W Iso Unreg DC/DC Converter

Low Power, Precision, 105 MHz, Voltage Feedback Op Amp

Automotive Fault Protected CAN Transceiver With Flexible Data-Rate

2-Ch 15-W Differential Analog Input Class-D Amplifier With Low Idle Power Dissipation

Use the download button to access the REF3318AIDCKR schematic symbol, PCB footprint, and 3D model.

GREEN, PLASTIC, TSSOP-24

VQCCN-10

ARM Microcontrollers - MCU Tiva C Series Microcontroller

Use the download button to access the OPA192QDGKRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TDP142RNQT schematic symbol, PCB footprint, and 3D model.

IC CONFIG MULTI FUNCTION SC70-6

Audio Amp Speaker 1-CH Mono 1.45W Class-D 8-Pin HVSSOP EP T/R

Buffers & Line Drivers Dual w/ Open-Drain

Conv DC-DC 0.7V to 5.5V Synchronous Step Down Single-Out 1.8V to 5.5V 0.3A 6-Pin DSBGA T/R

Quad 2-input positive-NAND buffers with open collector outputs

Use the download button to access the TCAN4420DR schematic symbol, PCB footprint, and 3D model.

Op Amp Quad Precision Amplifier R-R I/O ±2.75V/5.5V 14-Pin VQFN EP T/R

SN74AUC1G08DCKRE4 is a single 2-input AND gate from Texas Instruments in the AUC ultra-low-voltage CMOS family, housed in a miniature SC-70-5 package with 5 mA output current. Designed for low-voltage signal gating in portable and mobile applications. Available from stock with worldwide shipping.

Texas Instruments PTLV75730PDBVR is a 1 A fixed-output low-dropout (LDO) regulator with 500 mV typical dropout voltage, operating from 3.5 V to 5.5 V input in a 5-pin SOT-23 package. It delivers 0.002% line regulation and very low quiescent current, making it ideal for always-on battery-powered applications. A compact, efficient solution for noise-sensitive consumer and IoT power rails.

Dual High-Current Buck Converters and Linear Regulators

Single voltage-feedback operational amplifier with 75dB typical CMRR and 4fA maximum bias current, packaged in an ultra-compact 6-pin SC-70 for battery-powered applications. Offers 3200µV maximum input offset voltage and internal frequency compensation. Well suited for portable sensor interfaces and low-power signal conditioning designs worldwide.

Buffers & Line Drivers Quad Bus Buff Gate With 3-State Outputs

Operational Amplifiers - Op Amps Sngl Lo-Pwr RRIO Hi Out Crnt Drv/Shtdwn

2.7V to 18V, 4A, 34mΩ eFuse With Fast Overvoltage Protection

Integrated Power Management (PMIC) for ARM® Cortex™-A8/A9 SOCs and FPGAs

Use the download button to access the TLV9002IDR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LPV821DBVR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TLIN2029DQ1 schematic symbol, PCB footprint, and 3D model.

The PSN74AXC1T45DCKR is a single-bit dual-supply bidirectional bus transceiver from Texas Instruments in the AXC family. It supports voltage translation between logic levels as low as 0.65 V and up to 3.6 V, featuring a 12 mA output drive in a 6-pin SOT-23 package.

Dual 26V, Low- or High-Side Voltage Output Current Sense Amplifier

Dual Transmitter/Receiver RS-232 16-Pin TSSOP T/R

2.7V to 18V, 4A, 34mΩ eFuse With Fast Overvoltage Protection

2.5V, 200MHz GBW, CMOS Single Op Amp

12-bit 140-kSPS 2-ch nanopower SAR ADC with 1.8-V operation in 1.5-mm x 2-mm QFN package

3V Low-Drift Low-Power Small-Footprint Series Voltage Reference

1A Low-Quiescent-Current Low-Dropout (LDO) Regulator

Use the download button to access the LM73606QRNPTQ1 schematic symbol, PCB footprint, and 3D model.

The LM76003RNPR is a synchronous step-down switching regulator from Texas Instruments featuring current-mode control with pulse frequency modulation, supporting a wide 3.5 V to 60 V input range and an adjustable output from 1 V to 57 V for industrial and automotive power systems.

Automotive 36-V, Precision, RRIO, Low Offset Voltage, Low Input Bias Current Op Amp With e-trim

Automotive Qualified 3.5V to 36V, 5A Synchronous Step-Down Voltage Converter

The ADS7047IRUGR is a Texas Instruments 12-bit, 3MSPS differential-input SAR ADC in a small, low-power package with an analog input range of -2.35V to 3.6V and integral linearity error of just 0.0183%, ideal for precision data acquisition systems. Available from stock with worldwide shipping.

Buffers & Line Drivers OCTAL BUFFER/LINE DRIVER

Linear Voltage Regulators 9V 100mA Fixed Pos Voltage Regulator

Mono, Low Power, Class-AB Audio Amplifier with Stereo Headphone Driver-Summing Inputs

Mono Class-AB Audio Amplifier with Stereo Headphone Drive--Summed Inputs

2.7V to 18V, 4A, 34mΩ eFuse With Fast Overvoltage Protection

Operational Amplifiers - Op Amps 10-MHz L-N L-V L-P