Texas Instruments

Analog To Digital Converters (ADCs) 12 1M 8 SPI 2.7V~5.25V,1.65V~5.25V QFN-20 RoHS

Single Channel Single ADC SAR 3Msps 10-bit Serial 6-Pin SOT-23 T/R

Data Acquisition ADCs/DACs - Specialized 4-Bit DAC Voltage Monitor

GREEN, PLASTIC, TSSOP-8

Texas Instruments LM293DE4 is a dual differential comparator in an 8-pin SOIC package with open-collector outputs. It features a maximum input bias current of 0.4 µA and input offset voltage up to 9 mV, suitable for voltage level detection and logic interfacing in industrial and consumer applications. Available with worldwide shipping.

Analog Comparators Dual Differential Comparator

Use the download button to access the CD4024BF schematic symbol, PCB footprint, and 3D model.

Phase Locked Loops - PLL Hi Spd CMOS Logic Phase Lckd Loop

Fault Protected CAN Transceiver With CAN FD and Wake Input

Conv DC-DC 3.5V to 60V Synchronous Step Down Single-Out 0.8V to 58V 1.5A 10-Pin HVSSOP EP Tube

Fault Protected CAN Transceiver With CAN FD and Wake Input

Fault Protected CAN Transceiver With CAN FD and Wake Input

2.4V-5.5V input, 2A step-down converter With 1% Accuracy in 1.5x2mm QFN

Operational Amplifiers - Op Amps 5962-0051206QPA

Fault Protected CAN Transceiver With CAN FD and Wake Input

6-uA Quiescent Current, 1.8-A Switch Current Boost Converter

Counter/Divider Single 7-Bit Binary UP 14-Pin SOIC Tube

The TPS79030DBVTG4 is a fixed 3.0 V, 50 mA low-dropout LDO linear regulator from Texas Instruments with ultra-low 115 mV maximum dropout voltage. It accepts 4 V to 10 V input and provides stable regulation in a compact 5-pin SOT-23 package. Ideal for noise-sensitive RF, analog, and sensor power supply applications.

MCU 16-bit MSP430 RISC 60KB Flash 2.5V/3.3V 64-Pin LQFP T/R

Conv DC-DC 1.8V to 6V Step Up Single-Out 1.8V to 28V 6-Pin WSON EP T/R

RS-422 Interface IC Dual Differential Line Driver

The CD4068BF is an 8-input AND/NAND gate IC from Texas Instruments, built on CMOS technology with a single logic element housed in a 14-pin CDIP ceramic package. It operates with a load capacitance of 50 pF and max output low current of 1.5 mA. Available in tube packaging with worldwide shipping.

6-Pin High Performance CRM/DCM PFC Controller

Gate Drivers Dual 4 A Peak High Speed Low-Side

RS-422/RS-485 Interface IC 3V Full-Dplx Driver and Receiver

Video Amp Quad 5V 14-Pin TSSOP Tube

Switching Voltage Regulators 3.5V to 36V, 650mA Synchronous 2.1MHz Step-Down Converter for Automotive Applications 10-WSON -40 to 150; NOT VERIFIED -> Excludes vias, needs adjustment to thermal pad

XOR Gate 4-Element 2-IN CMOS 14-Pin SOIC T/R

Hex Noninverting Drivers

32-Bit Digital Signal Controller with Flash

The SN74HC86DE4 is a quadruple 2-input exclusive-OR (XOR) gate IC from Texas Instruments' high-speed HC CMOS logic family, packaged in a 14-pin SOIC. It operates from 2V to 6V supply with TTL-compatible inputs and 5.2 mA output drive, making it suitable for parity generation, bit comparison, and arithmetic functions in digital logic designs.

Standard Regulator Neg -15V 0.1A 8-Pin SOIC Tube

Precision Amplifiers High Precision Oper Amplifier

Precision Amplifiers High Precision Oper Amplifier

RS-232 Interface IC 3-5.5V Multich RS- 232 Line Drvr/Rcvr

TEXAS INSTRUMENTS - REF3020AIDBZTG4 - Voltage Reference, Precision, Low Power, Series - Fixed, REF3020 Series, 2.048V, SOT-23-3

TEXAS INSTRUMENTS - LM337LZ - Linear Voltage Regulator, Adjustable, 40V primary input, -37V to -1.2V/100 mA/1 Output, TO-92-3

The UC3524DWG4 is an advanced regulating pulse-width modulation switching controller IC from Texas Instruments. It features voltage-mode control with an input voltage range of 8V to 40V and is housed in a 16-pin SOIC package, ideal for DC-DC converter designs.

Monostable Multivibrator CMOS Low-Power Monostable/Astable Multivibrator 14-CDIP -55 to 125

Texas Instruments UC3823ANG4 is a voltage-mode PWM controller with 12V to 20V supply range, up to 1 MHz switching frequency, and 5.15V/200mA reference output in a DIP-16 package. Configurable for current-mode control for flexible power supply designs. Available from stock with worldwide shipping.

TEXAS INSTRUMENTS - UC3823NG4 . - PWM Controller, 30V-10V supply, 1 MHz, 5.2V/200mA out, DIP-16

The SN74HCT574DWRE4 is an octal D-type flip-flop with 3-state outputs from Texas Instruments, designed for high-speed bus interface and data storage applications. It features positive-edge triggering, active-low output enable, operates at up to 27 MHz, and is available in a 20-pin SOIC package.

OP Amp Dual GP ±18V 8-Pin VSON EP T/R

TEXAS INSTRUMENTS - TLK2201AJRZQE - Ethernet Controller, 1.6 Gbps, IEEE 802.3, 2.3 V, 2.7 V, BGA, 80 Pins

The CD74HC165EE4 is an 8-bit parallel-in serial-out shift register from Texas Instruments HC logic family, operating up to 20 MHz and supporting serial-in serial-out operation as well. It accepts 2 V to 6 V supply and is packaged in a 16-pin PDIP for through-hole board assembly. Ideal for expanding parallel I/O through a serial interface.

The O917A14FTRGZTQ1 is an automotive-grade integrated power management IC (PMIC) from Texas Instruments with 10 output channels and adjustable thresholds, supporting 3.135V to 5.25V input range in a 48-pin QFN package. It integrates multiple voltage regulators and supervisory functions for automotive SoC and processor power supply. AEC-Q100 qualified for -40°C to 125°C automotive applications.

The MAX3232IDBG4 is a dual RS-232 line driver/receiver from Texas Instruments operating from a 3 V to 5.5 V supply with on-chip charge pump capacitors for RS-232 voltage generation. It provides 2 drivers and 2 receivers with Schmitt-trigger inputs compliant with EIA/TIA-232-F (V.28). Available in stock with worldwide shipping from authorized distributors.

Power Management Specialised - PMIC

Texas Instruments UC3823BN, PWM Current Mode Controller, Dual-Channel 2 A, 1, 16-Pin PDIP

TVSOP-24