Texas Instruments

TS5A4596DCKRG4 is a single-channel SPST analog switch in a 5-pin SC-70 package, operating from 1.65 V to 5.5 V supply with up to 450 MHz signal bandwidth. It features low on-resistance, bidirectional signal flow, and rail-to-rail analog signal switching. Available from stock with worldwide shipping.

Counter Single 4-Bit Sync Binary UP/Down 16-Pin CDIP Tube

2S-4S 2LP WITH LDO ALWAYS ENAB

I2C/SMBus GPIO Expander 400kHz 5.5V 24-Pin TSSOP Tube

Overvoltage Protection Device Li-Ion 2000mA -0.3V to 30V 8-Pin WSON EP T/R

Multi Function Gate 1-Element 2-IN CMOS 6-Pin SC-70 T/R

TEXAS INSTRUMENTS - TS5USBC410YFFT - USB Interface, Differential 2:1/1:2 Mux/Demux, USB 2.0, 2.3 V, 5.5 V, DSBGA, 12 Pins

Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs

Texas Instruments MAX222CDWG4 is a dual RS-232 transmitter/receiver IC in an 18-pin SOIC package with Schmitt trigger inputs and EIA-232-F compliance. Available from stock with worldwide shipping.

Gate Drivers Low-side Power MOSFET Driver With Body Diode conduction Sensing 6-SON -40 to 125

Buffers & Line Drivers Quad Bus Buffer Gate With 3-State Outputs

MAX222CDWRG4 is a dual EIA/TIA-232-F RS-232 line transceiver with Schmitt trigger inputs from Texas Instruments. Features 2 drivers and 2 receivers with charge-pump voltage converter in an 18-pin SOIC package. RoHS compliant and available worldwide for serial communication interface applications.

Flip Flop D-Type Pos-Edge 2-Element 14-Pin CDIP Tube

TPS76038DBVT is a fixed-output 3.8 V, 50 mA low-dropout linear regulator in a 5-pin SOT-23 package. It supports 4 V to 16 V input voltage, features a 120 mV typical dropout voltage, and achieves ultra-low quiescent current for always-on portable and battery-backed power rail applications.

MAX222IDWRG4 is a Texas Instruments 18-position integrated circuit for reliable PCB assembly and replacement sourcing. It uses a Small Outline Packages format with documented specifications for engineering review. Request quote-based stock, lifecycle support, and worldwide.

Single Transmitter/Receiver RS-485 8-Pin SOIC Tube

Bus XCVR Single 8-CH 3-ST 20-Pin SOIC Tube

Analog Comparators Quad Low-Power Differential

NRND, ALTERNATE IS LM2936HVBMA

Interface - I/O Expanders Rem 16B I2C & SMBus I/O Expander

Comparator Quad ±18V/36V 14-Pin SOIC T/R

High Speed Operational Amplifiers 270-MHz Volt-Feedback Amp

Bus XCVR Single 8-CH 3-ST 20-Pin SOIC Tube

Octal Buffer/Driver With Open-Collector Outputs

LDO Regulator Pos 3.3V 0.05A 5-Pin SOT-23 T/R

Digital to Analog Converters - DAC DUAL-CHANNEL,12B 500MSPS DACS

Clock Buffer 1-to-5 Diff-to-3.3V LVPECL Fanout Buffer

Texas Instruments CD74AC244M96G4 is an 8-channel non-inverting 3-state bus driver in a 20-pin SOIC package, supporting unidirectional signal buffering with active-low output enable. Key specs: 12 mA output drive per channel, 50 pF load capacitance, propagation delay ~5 ns at 5V, AC-family CMOS speed. Available from authorized distributors with worldwide shipping.

Conv DC-DC 2.5V to 5.5V Synchronous Step Down Single-Out 0.6V to 5.5V 3A 6-Pin SOT-563 T/R

IC OPAMP GP 1MHZ RRO 14SOIC

Current Mode PWM Controller 18V 200mA 8-Pin VSSOP T/R

8-Bit Dual-Supply Bus Transceiver

The PTMUX6112PWR is a 36V, low-capacitance, low-leakage-current precision quad SPST normally-open analog switch from Texas Instruments in a Small Outline package. It offers excellent signal integrity with minimal charge injection and low on-resistance for high-precision switching applications. Available from stock worldwide with fast shipping and competitive pricing.

Use the download button to access the TMP112BIDRLR schematic symbol, PCB footprint, and 3D model.

Analog Comparators Dual Micropower Push-Pull Output

SN74HC86PWG4 is a quad 2-input XOR gate in a 14-pin TSSOP package, operating from 2 V to 6 V with 4 mA output sink current and 50 pF load drive. The HC-family CMOS device is used for parity generation, comparator logic, and signal polarity control in digital systems.

113dB SNR Stereo DAC

SN74ACT244DWRG4 is an 8-channel non-inverting 3-state buffer and line driver from Texas Instruments in the ACT CMOS logic family, housed in a 20-pin SOIC package. It provides 24 mA output sink current with 50 pF load capacitance rating for driving capacitive bus loads at TTL-compatible input thresholds. Available from stock with worldwide shipping.

ADS8506IBDWG4 is a 28 pins adc by Texas Instruments. Key specs: 28 pins, Small Outline Packages package, SOP, SOP28,.4. From quote-based sourcing, in stock checks support worldwide shipping.

Use the download button to access the RM48L540DPGET schematic symbol, PCB footprint, and 3D model.

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SOIC Tube

The ADS8504IBDWG4 is a 12-bit successive approximation ADC from Texas Instruments with a single analog input channel, ±10 V input range, and 2.2 µs max conversion time in a 28-pin SOIC package. Ideal for precision industrial data acquisition. Available worldwide with fast shipping.

True 12-Bit, 8-channel, SPI, Vout DAC in tiny WCSP package with precision internal reference

Operational Amplifiers - Op Amps Low Power Rail-Rail

The PCF8575DWG4 is a 16-bit I2C and SMBus I/O expander IC from Texas Instruments with 2 ports of 8 I/O lines each, supporting up to 400 kHz fast-mode I2C clock in a 24-pin wide SOIC package. It is RoHS-compliant and widely used for GPIO expansion in embedded and industrial designs.

SN74AHC126PWG4 is a quad single-bit non-inverting three-state buffer in a 14-pin TSSOP package, part of the AHC CMOS logic family. It supports a 2 V to 5.5 V supply range, propagation delay under 6 ns at 5 V, and output drive current of 8 mA, targeting bus interface and signal isolation applications.

1080p Dual FPD-Link III Serializer

TPS76825QPWPRQ1 is an automotive-grade, fixed 2.5 V low-dropout linear voltage regulator from Texas Instruments, delivering 1 A output current with a 230 mV maximum dropout voltage. It accepts an input voltage of 2.7 V to 10 V and is AEC-Q100 qualified for use in harsh temperature environments. Packaged in a 20-pin HTSSOP, it serves ADAS, body electronics, and powertrain control units requiring a stable 2.5 V power rail.

Texas Instruments TL7660IDRG4 is a switched-capacitor charge pump that inverts, steps up, or steps down input voltages from 1.5 V to 10 V, generating outputs from -1.5 V to -10 V or up to 20 V, in an 8-pin SOIC package.

TL7660CPE4 is a CMOS switched-capacitor voltage converter by Texas Instruments that inverts a positive input voltage to a negative output, operating from 1.5V to 10V supply in an 8-pin DIP package. Key specs: 1.5V to 10V input range, negative voltage output, switched-capacitor converter topology. Available in stock with worldwide shipping.