Texas Instruments

Low-Power Stereo CODEC with 6 Inputs, 6 Outputs, HP Amp and Enhanced Digital Effects

PTLV73310PQDBVRQ1 is an automotive-grade capacitor-free 300 mA LDO linear regulator from Texas Instruments with foldback current limiting and 1 V maximum dropout voltage. It accepts input voltages from 1.4 V to 5.5 V and provides 0.001% line regulation in a compact 5-pin SOT-23 package. Available worldwide through authorized TI distributors for automotive supply chains.

1-Channel, 1MHz, RRIO, 1.8V to 5.5V Operational Amplifier for Cost-Optimized Systems

The PTLV73333PQDBVRQ1 is an AEC-Q100-qualified automotive LDO regulator from Texas Instruments, delivering 300 mA at 3.3 V with capacitor-free stability, foldback current limit, and a 3.8 V to 5.5 V input range in a 5-pin SOT-23 package.

Current Sense Amplifiers 40V, Bi-Directional, Low-/High-Side, Zero-Drift, Voltage Output CSA w/low bias current and enable 10-UQFN -40 to 125

600-V 70mΩ GaN with integrated driver and cycle-by-cycle overcurrent protection

500-mA low-IQ ultra-low-dropout (LDO) (130 mV at 500 mA) linear regulator

Precision Amplifiers Mil Enhance Excal Hi Spd Lo-pwr Prec

Inverters Single Schmitt-Trigger Inverter Gate 5-SC70 -40 to 125

LDO Voltage Regulators NRND, alternate is LP2981IM5X-5.0/NO

PTLV73330PQDBVRQ1 is an AEC-Q100 automotive-grade 300 mA capacitor-free LDO regulator with foldback current limiting, 3.3 V fixed output, and 3.5 V to 5.5 V input range in a compact SOT-23-5 package. Features 0.33 V typical dropout voltage and 0.001% line regulation for precise power delivery. From $0.85 in stock worldwide shipping.

Texas Instruments PTLV73318PQDBVRQ1 is an automotive-qualified, capacitor-free 300 mA LDO regulator with a fixed 1.8 V output and foldback current limiting. It accepts inputs from 2.3 V to 5.5 V with a maximum 0.34 V dropout voltage and achieves 0.001% line regulation. Available in a 5-pin SOT-23 package rated for AEC-Q100 automotive environments.

500-mA low-IQ ultra-low-dropout (LDO) (130 mV at 500 mA) linear regulator

Automotive 300-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator

TPS7A11105PDRVR is a 500 mA ultra-low-dropout LDO linear regulator with a 130 mV nominal dropout voltage at full load and a fixed 0.5 V output. It operates from an input range of 1.55 V to 3.3 V and is housed in a compact 6-pin WSON package. Suited for low-voltage rail regulation in IoT, wearable, and battery-powered portable applications.

PTLV73325PQDBVRQ1 is an automotive-grade capacitor-free 300 mA LDO regulator from Texas Instruments with foldback current limiting, 0.33 V typical dropout voltage, and 3 V to 5.5 V input range in a SOT23-5 package with worldwide shipping.

10-Bit Universal Schmitt-Trigger Buffers With 3-State Outputs

Display Drivers & Controllers DLP- Display Controller for DLP230KP (0.23 HD) DMD 176-NFBGA

The PTLV73328PQDBVRQ1 is an automotive-grade, capacitor-free 300 mA fixed LDO linear regulator from Texas Instruments with foldback current limiting, delivering exceptional 0.001% line regulation and 0.025% load regulation. It operates from 3.3V to 5.5V input in a compact 5-pin SOT-23 package. Available from stock with worldwide shipping.

The BQ24703PWRG4 is a Li-Ion charge controller from Texas Instruments with 3 charge channels, adjustable thresholds, and 2.5 V minimum supply in a 24-pin TSSOP package. It provides 7.1 mA gate drive current and supports multi-cell lithium battery charging for notebooks and portable equipment.

Use the download button to access the SN74LVC3G07DCT3 schematic symbol, PCB footprint, and 3D model.

The LM4040B25IDCKRG4 is a precision micropower shunt voltage reference with a fixed 2.5V output and tight ±0.2% initial accuracy. It operates as a two-terminal shunt device with ultra-low power consumption in a compact SOT23-5 package. Available from stock globally with worldwide shipping.

Enhanced Product Ieee 1394B Three-Port Cable Transceiver/Arbiter

Use the download button to access the TPS2120YFPR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS2120YFPT schematic symbol, PCB footprint, and 3D model.

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SOIC Tube

The LM6181AIM-8 is a high-speed current-feedback operational amplifier in an 8-pin SOIC package. It delivers wide bandwidth and fast slew rate for demanding signal processing tasks. Suitable for video, RF, and high-frequency instrumentation applications requiring stable performance.

Buffer/Driver 6-CH Non-Inverting Open Collector Bipolar 14-Pin SOP Tube

CD74AC574M96G4 is an octal non-inverting D-type flip-flop in the AC CMOS logic family, featuring 3-state outputs and tri-state enable, rated for 50 pF load and housed in a 20-pin SOIC package.

Use the download button to access the SN74LVC1G08DCK3 schematic symbol, PCB footprint, and 3D model.

IC TXRX NON-INVERT 3.6V 20DIP

LDO Voltage Regulators 10-mA 3V Micro Power LDO Vltg Reg

Piezo Haptic Driver with Integrated Boost Converter and Digital Front End

Volt Supervisor Monitor 3.3V/5V/12V 8-Pin SOIC T/R

Supervisory Circuits PC Pwr Supply Sup

Gate Drivers Non-inverting H-S MOSFET Driver

16-bit Microcontrollers - MCU Mixed Signal MCU

Differential Amplifiers Full Diff I/O Hi Sl

16-bit Microcontrollers - MCU Mixed Signal MCU

Use the download button to access the ADS1119IPWT schematic symbol, PCB footprint, and 3D model.

16-bit Microcontrollers - MCU 16-bit MCU60KB Flash , 2KB RAM, 12-bit

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SOIC T/R

The SN74AC10DRG4 is a triple 3-input positive-NAND gate IC from Texas Instruments in the AC-family CMOS logic series. It provides three independent NAND gates each with 3 inputs, 12mA output current, and 50pF load capacitance in a 14-pin SOIC package. Available from stock worldwide with competitive pricing for high-speed logic circuit designs.

Logic Gates Single 2-Input Positive-OR Gate 5-SC70 -40 to 85

18-Channel I2C Constant-Current RGB LED Driver

LIN Transceiver with Integrated Vreg 20kBd Automotive 14-Pin VSON EP T/R

Ultra-Low Power MSP430 1.8V Split-Rail I/O

16-bit Microcontrollers - MCU

Texas Instruments ISO3088DWG4 is an isolated RS-485/RS-422 line transceiver in a 16-pin SOIC package, combining a galvanic isolation barrier with EIA-485 and EIA-422 differential I/O and a Schmitt-trigger input receiver. It supports differential output signaling with up to 10 µA input leakage current for robust industrial bus communication. Available from stock with worldwide shipping.

LDO Regulator Pos 2.5V 0.1A 5-Pin SOT-23 T/R