Texas Instruments

The TL7726CDRG4 is a 6-channel analog clamping circuit from Texas Instruments in an 8-pin SOIC package, designed to protect sensitive logic inputs from voltage spikes and overvoltage transients in mixed-signal and digital systems. It clamps input signals to safe voltage levels, preventing damage to CMOS and TTL logic ICs during electrostatic discharge events or inductive switching. Available in stock worldwide for signal protection and ESD clamping applications.

Voltage References High-bandwidth low-IQ programmable shunt regulator 3-SOT-23 -40 to 125

Voltage References Lo Noise Very Low Drift Prec VLTG REF

UCC3895QTR is a phase-shift resonant-mode PWM switching controller by Texas Instruments, supporting voltage-mode and current-mode control. Key specs: 10V–16.5V input range, 20-pin PLCC package, pulse-width modulation with soft-switching capability. From $2.50, in stock with worldwide shipping.

OPA861IDBVTG4 is a wide-bandwidth operational transconductance amplifier (OTA) with 80 MHz bandwidth, 5 µA input bias current, and a voltage-feedback architecture suitable for current-output signal processing. It is housed in a compact 6-pin SOT-23 package ideal for portable and high-frequency designs. Available from stock worldwide with fast shipping.

Bus XCVR Dual 16-CH 3-ST 56-Pin SSOP Tube

Power Management Specialized - PMIC Hex Clamping Circuit

Full Speed USB to Serial Port Controller USB 2.0 3.3V Tube 32-Pin VQFN EP

Adjustable precision shunt regulator

NAND Gate 4-Element 2-IN CMOS 14-Pin TSSOP T/R

Texas Instruments TPS2376DG4 is an IEEE 802.3af compliant Power over Ethernet powered device controller managing PoE classification, detection, and power-up sequencing in a single 8-pin SOIC package. Supports single-channel operation with integrated protection features. Available from stock with worldwide shipping.

The UCC27223PWPR is a dual-output high and low side gate driver from Texas Instruments, delivering 3.3 A peak output current with voltage-mode PWM control. It supports input voltages from 4.4 V to 20 V in a 14-pin HTSSOP package with exposed pad. From $1.80 in stock with worldwide shipping.

NAND Gate 4-Element 2-IN CMOS 14-Pin SOIC Tube

NAND Gate 4-Element 2-IN CMOS 14-Pin SOIC Tube

Power Switch ICs - POE/LAN IEEE 802.3af PoE Pwr Device Cntrler

NAND Gate 4-Element 2-IN CMOS 14-Pin SOIC T/R

LED Lighting Drivers 8B Constant-Current LED Sink

Standard Timer Dual 14-Pin SOIC T/R

DAC 1-CH Resistor-String 16-bit 16-Pin TSSOP T/R

The TLC27L2CPS is a dual precision single-supply micropower operational amplifier in DIP-8 package. Features 0.06 nA bias current at 25°C, 94 dB typical CMRR, and ultra-low power consumption for battery applications. Available from stock worldwide with competitive pricing.

DC DC Cntrlr Dual-OUT PWM DC to DC Controller/Step Up/Step Down 3.6V to 50V Input 16-Pin SOP Tube

Transistor Output Optocouplers Single-Channel Optocoupler/Optoisolator 4-PDIP

Analog to Digital Converters - ADC 16B Pseud Diff Input 200kSPS Serial Out

Texas Instruments TLC27L2CPE4 is a dual precision single-supply micropower operational amplifier with 60 dB minimum CMRR and 0.0006 µA max bias current in an 8-pin DIP package. From $0.85 in stock with worldwide shipping.

Encoders, Decoders, Multiplexers & Demultiplexers 8 to 1-Line Data Selector/Multiplexer

Encoders, Decoders, Multiplexers & Demultiplexers 8 to 1-Line Data Selector/Multiplexer

Use the download button to access the DAC8581IPWR schematic symbol, PCB footprint, and 3D model.

TSSOP-16

Use the download button to access the OPT8320NBP schematic symbol, PCB footprint, and 3D model.

Voltage References Adjustable Precision Shunt Regulator

Transistor Output Optocouplers Single-Channel Optocoupler/Optoisolator 4-PDIP

SN65LV1023ADBG4 is a high-speed 10:1 serializer/deserializer from Texas Instruments that converts 10 parallel LVTTL/LVCMOS data lines into a single differential LVDS serial stream at up to 840 Mbps. It operates from a 3.3 V supply over -40°C to 85°C in a 28-pin SSOP package. Available from stock worldwide shipping.

DC DC Cntrlr Dual-OUT PWM DC to DC Controller/Step Up/Step Down 3.6V to 50V Input 16-Pin TSSOP T/R

Dual Pulse-Width-Modulation Control Circuit

DC DC Cntrlr Dual-OUT PWM DC to DC Controller/Step Up/Step Down 3.6V to 50V Input 16-Pin SOP T/R

Current Mode PWM Controller 18V 200mA 8-Pin SOIC Tube

Counter ICs 8-Bit Bin Counter Input Register

Supervisory Circuits Sngl SVS f/5V System w/Prg Time Delay

Operational Amplifiers - Op Amps

Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

Texas Instruments CD74HC109ME4 is a dual positive-edge-triggered J-K flip-flop with High-Speed CMOS logic in a 16-pin SOIC package, operating up to 20 MHz with 50 pF load capacitance. From $0.50, in stock, worldwide shipping.

SOP-20

IC FF D-TYPE SNGL 8BIT 20TSSOP

PHY 1-CH 1.8V/2.5V/3.3V Automotive 36-Pin VQFNP EP T/R

36-V, low noise (2.2-nV/√Hz), high-precision (5µV Vos, 0.1µV/°C Drift), super beta(0.3nA IB) op amp

Hot Swap Voltage Controllers 12-V eFuse With Overvoltage Protection 8-WSON -40 to 125

CD4049UBM96 is a Texas Instruments CMOS hex inverting buffer and logic-level converter from the 4000-series family, rated from -55°C to 125°C. It contains 6 independent inverters operating across a 3 V to 15 V supply range in a 16-pin SOIC package. Ideal for signal inversion, level conversion, and fanout buffering in industrial and military electronics.

CD74HC112PWRE4 is a dual negative-edge-triggered J-K flip-flop in HC CMOS logic family by Texas Instruments. Key specs include 4 MHz max frequency, 15 pF load capacitance, and 16-pin TSSOP package. Available from stock with worldwide shipping.

LMV712IDGSRG4 Texas Instruments, Op Amp, 5MHz, 3 V, 10-Pin MSOP

Texas Instruments XLM5155QDSSTQ1 is an AEC-Q100 automotive-grade, current-mode PWM controller supporting boost, SEPIC, and flyback topologies at up to 2.2 MHz switching frequency, designed for wide input-voltage automotive power conversion. Packaged in a compact 12-pin WSON for space-constrained automotive power supplies.