Texas Instruments

The SN75469NG4 is a 7-channel NPN Darlington transistor array from Texas Instruments with 100V collector-emitter voltage and 500mA continuous output current per channel in a 16-pin DIP package. It is designed to drive high-current loads such as relays, solenoids, and stepper motors directly from logic-level signals. Available in stock with worldwide shipping from authorized distributors.

TPS77333DGKG4 is a 250mA LDO voltage regulator with fixed 3.3V output and fast transient response. Features 0.2V typical dropout voltage and 10V maximum input range. Available from Texas Instruments in SO-8 package with worldwide shipping.

Current Limit SW 3-IN 3-OUT 0V to 13.5V 1A 20-Pin HTSSOP EP T/R

Precision Amplifiers Dual Lo-Noise Prec Rail-to-Rail

Analog to Digital Converters - ADC

Texas Instruments TPS793285DBVTG4 is a fixed 2.85 V LDO linear regulator delivering 200 mA output current with ultralow 120 mV typical dropout voltage in a 5-pin SOT-23 package. Features excellent 0.0056% line regulation and supports input voltages from 3.05 V to 5.5 V for low-power portable designs. Available from stock worldwide with tape-and-reel packaging for automated assembly.

UART Interface IC 1.8V to 5V Dual UART

The TPS73630DBVRG4 is a capacitor-free NMOS LDO linear voltage regulator from Texas Instruments, delivering 400mA output current with only 75mV typical dropout voltage. It supports 3.2V to 5.5V input and provides 0.0003% line regulation in a compact 5-pin SOT-23 package. Available in stock with worldwide shipping.

The TLC2202MJG is a dual general-purpose rail-to-rail output operational amplifier from Texas Instruments, supporting ±8V or 16V single supply operation in an 8-pin CDIP ceramic package. It features ultra-low bias current of 0.00006µA typical and 110dB common-mode rejection ratio for precision signal conditioning. Available in hermetic ceramic packaging for military and high-reliability applications with worldwide stock and shipping.

Board Mount Hall Effect/Magnetic Sensors Low voltage (up to 5.5V), high bandwidth (up to 30 kHz) unipolar switch 3-SOT-23 -40 to 125

TEXAS INSTRUMENTS - LMV824DE4 - Operational Amplifier, Quad, 4 Amplifier, 5.5 MHz, 1.7 V/µs, 2.5V to 5V, SOIC, 14 Pins

Use the download button to access the TL750L08CDR schematic symbol, PCB footprint, and 3D model.

Analog Switch Quad SPDT 16-Pin TSSOP Tube

Power Management Specialised - PMIC 5Ch Pwr Mgmt IC

Voltage References Precision Adjustable Shunt

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin TSSOP Tube

LM6134BIN NOPB is a quad general-purpose rail-to-rail input/output op-amp from Texas Instruments. It operates from a 24V supply in a 14-Pin PDIP through-hole package, ideal for precision signal processing. Available from stock worldwide with fast delivery.

TS5V330DE4 is a quad SPDT analog switch from Texas Instruments in a 16-pin SOIC package, offering 7 Ω maximum on-state resistance and 60 dB off-state isolation across 4 independent single-pole double-throw channels. Suited for signal routing in audio, data acquisition, and communication systems. In stock with worldwide shipping.

Precision Amplifiers Adv LinCMOS Lo-Nse Precision Dual

UART Interface IC Sngl UART w/16-Byte FIFOs & Aut Flw Ctrl

16-bit Microcontrollers - MCU Mixed Signal MCU

OP Amp Dual GP R-R O/P ±8V/16V 14-Pin SOIC Tube

High Speed Operational Amplifiers Dual High Output Current 120-MHz

Texas Instruments TLC2202ACDG4 is a dual low-noise operational amplifier in a 14-pin SOIC package. It features a maximum input offset voltage of 650 µV, 85 dB minimum CMRR, and ultra-low bias current of 0.0001 µA for precision signal processing. Available from authorized distributors with worldwide shipping.

The TLV2404IPWG4 is a quad rail-to-rail input/output general-purpose operational amplifier in a 14-pin TSSOP package, operating from ±8 V or 16 V single supply, with 120 dB typical CMRR and 1500 µV max offset voltage, suited for multi-channel signal conditioning and active filter designs.

Analog to Digital Converters - ADC 12B 250MSPS Buffered Low Power ADC

Analog to Digital Converters - ADC 8-Ch 24-Bit ADC

Analog to Digital Converters - ADC 8-Ch 24-Bit ADC

Dual, High Output Current, 120-MHz Amplifier

Texas Instruments THS3121IDG4 is a single current-feedback operational amplifier in an 8-pin SOIC package with ±15 V dual supply or 30 V single supply operation. Delivers 60 dB minimum CMRR, frequency compensation, and 13 mV max input offset voltage for high-speed signal conditioning. Available from stock worldwide with fast shipping.

Low IQ linear battery charge management solution with LDO and ADC

Texas Instruments MSP430F6459IZQWT is a SEARAY high-speed board-to-board array connector. It provides 113 positions on a .050 in pitch open-pin-field terminal. From inquiry pricing, request current stock for worldwide shipping.

8-Channel Octal ADC Pipelined 200Msps 12-bit Serial LVDS 64-Pin VQFN EP T/R

OP Amp Quad GP R-R I/O ±8V/16V 14-Pin SOIC Tube

PADC3424IRTQT is a 12-bit, 4-channel analog-to-digital converter by Texas Instruments in a 56-pin QFN package, with ±2 V input range and proprietary conversion architecture. Key specs: 12-bit resolution, 4 analog input channels, ±2 V input voltage range. From $5.00, in stock with worldwide shipping.

Conv DC-DC 8V to 40V Synchronous Step Down Single-Out 1.21V to 37V 1A 8-Pin SOIC T/R

The XTLV61048DBVR is a 15V output non-synchronous boost converter in a compact SOT-23 6-pin package from Texas Instruments. It supports adjustable output voltage from 3.3V to 14V and operates in PFM mode for improved light-load efficiency. Input voltage range is 2.6V to 5.5V, making it ideal for portable battery-powered designs.

DIP-16

Interface - Specialized Automotive Catalog Low-Frequency Multi-Channel Antenna Driver for Passive Start and Passive Entry Sy 28-HTSSOP -40 to 105

GREEN, PLASTIC, TSSOP-28

Texas Instruments THS1030CDW, 10-bit Parallel ADC Differential, Single Ended Input, 28-Pin SOIC

TEXAS INSTRUMENTS - LMH6517SQE - Programmable/Variable Amplifier, 2 Channels, 1 Amplifier, 1.2 GHz, -40 °C, 85 °C, 4.5V to 5.25V

PLASTIC, LCC-44

30-V automotive wide VIN synchronous four-switch buck-boost controller

Use the download button to access the ADC3424IRTQR schematic symbol, PCB footprint, and 3D model.

Texas Instruments THS1030IPWRG4 is a 10-bit, 30MSPS single-channel high-speed ADC with 5.5V maximum analog input in a 28-pin TSSOP package. Delivers 0.1953% maximum linearity error for accurate wideband signal digitization. Pb-free and in stock with worldwide shipping.

210-MHz, 250-mA high-speed buffer

Texas Instruments THS1030CPWRG4 is a high-speed 10-bit single-channel analog-to-digital converter sampling at up to 30MSPS with up to 5.5V analog input range in a 28-pin TSSOP package. Available from stock with worldwide shipping.

Texas Instruments XBUF634AIDR is a 210 MHz, 250 mA high-speed buffer amplifier with ±15V nominal supply, 2 µA maximum bias current, and 8-pin SOIC package. Ideal for driving capacitive loads and transmission lines in high-frequency systems. From $4.50 in stock with worldwide shipping.

1-Channel Single ADC Pipelined 30Msps 10-bit Parallel 28-Pin TSSOP T/R