Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
35,209
Total Products
98
Categories
All Texas Instruments Components
Showing 13,251–13,300 of 35,209
High performance 32-bit ARM® Cortex®-M4F based MCU
Use the download button to access the SN75468DE4 schematic symbol, PCB footprint, and 3D model.
The 7901502EA is a dual 4:1 analog differential multiplexer from Texas Instruments with 25MHz bandwidth, supporting high-speed signal routing for instrumentation and data acquisition systems. It operates from -5V to +20.5V supply range and is housed in a 16-pin ceramic DIP for high-reliability and military-grade applications. Ideal for test equipment, precision measurement, and aerospace signal conditioning where analog channel selection and differential signal integrity are critical.
LQFP-100
3.3V, Full-Duplex RS-485, 16kV IEC ESD, 20Mbps data rate, w/Enables
LM3630A High-Efficiency Dual-String White LED Driver
Trans Darlington NPN 100V 0.5A 16-Pin PDIP Tube
TRANS 7NPN DARL 100V 0.5A DIP
UART 2-CH 16Byte FIFO 5V 68-Pin PLCC T/R
Overvoltage Protection Device Li-Ion -0.3V to 30V 8-Pin WSON EP T/R
V-Ref Adjustable 2.495V to 37V 100mA 3-Pin SOT-23 T/R
ARM Microcontrollers - MCU SimpleLink Mixed-Signal Microcontroller 100-LQFP -40 to 105
High-Speed, Low-Power, Precision Dual Operational Amplifier
Op Amp Single Wideband Amplifier ±6V 8-Pin CDIP Tube
The LMH6702WGFQMLV is a wideband current-feedback operational amplifier with 720 MHz bandwidth, ±6V supply operation, low input offset voltage of 4.5 mV, and high slew rate ideal for video and RF signal processing. Available in a 10-pin CSOIC package with worldwide shipping.
V-Ref Adjustable 2.495V to 37V 100mA 3-Pin SOT-23 T/R
RS-422/RS-485 Interface IC Quad RS-485 Diff Line Drs
The TPA3123D2PWPG4 is a dual-channel stereo Class-D audio amplifier from Texas Instruments delivering 25W nominal output power per channel in a 24-pin HTSSOP package with exposed pad. It features high switching efficiency to reduce heat without bulky heatsinks and drives two speaker channels simultaneously. Ideal for multimedia speaker systems, home audio receivers, and consumer electronics requiring compact, efficient stereo amplification.
Board Mount Temperature Sensors +/-1degC Rem and Temp Sensor
Board Mount Temperature Sensors +/-1degC Rem and Temp Sensor
Single Channel Single ADC Delta-Sigma 128sps 16-bit Serial 6-Pin SOT-23 T/R
1-Channel Single ADC Delta-Sigma 128sps 16-bit Serial 6-Pin SOT-23 T/R
Linear Charge Management Li-Ion 1200mA 8.4V 20-Pin HTSSOP EP Tube
The BQ24381DSGRG4 is a single-cell Li-Ion battery charger with overvoltage protection, supporting up to 1700mA charge current and a 5V input supply. It includes a power-on reset generator with a 7.1V reset threshold voltage for system protection in a compact 8-pin WSON package. Available from stock with worldwide shipping.
Battery Charger Li-Ion 1700mA 5V 8-Pin WSON EP T/R
Isolation Amplifiers 200 KHZ REINFORCED ISOLATED AMPLIFIER
RS-422/RS-485 Interface IC Quad RS-485 Diff Line Driver
The LF298MX is a monolithic sample and hold amplifier IC from Texas Instruments with a 10 µs typical acquisition time and 3 mV maximum hold offset voltage. It accepts analog input voltages of ±11.5 V, operates from -25°C to 85°C, and is packaged in a 14-pin SOIC for precision data acquisition applications.
Audio Amp Microphone 1-CH Mono Class-AB 28-Pin SSOP T/R
10:1 LVDS Serdes Transmitter 100 - 660Mbps
TEXAS INSTRUMENTS - THVD1551DGK - RS485 TRANSCEIVER, 50MBPS, VSSOP-8
TL062CDRE4 is a dual low-noise JFET-input operational amplifier by Texas Instruments, featuring 70dB minimum CMRR and 0.0002µA maximum input offset current in an 8-pin small outline package. Key specs: dual op-amp, JFET inputs, 70dB min CMRR, 10nA max bias current. Available in stock with worldwide shipping.
VC55GPSZHH is a 40-bit fixed-point digital signal processor by Texas Instruments, operating at up to 20MHz clock frequency with a 16-bit external data bus and boundary scan support, housed in a 179-ball BGA package. Key specs: 40-bit fixed-point DSP, 20MHz max clock, 16-bit external bus, -40°C to +85°C range. Available in stock worldwide.
The TMS320VC5509AGHHR is a fixed-point 40-bit automotive-grade DSP from Texas Instruments delivering 400 MIPS at 200 MHz with a 21-bit address bus and 16-bit external data bus, housed in a 179-pin BGA MICROSTAR package. It supports 1.2V and 1.35V supply options for ultra-low-power operation and includes JTAG boundary scan for manufacturing test. Ideal for automotive infotainment, telematics, and embedded audio/voice processing applications.
Operational Amplifiers - Op Amps 10-MHz L-N L-V L-P
10MHz, CMOS, Zero-Drift, Zero-Crossover, True RRIO Precision Operational Amplifier
3-V to 5-V Multichannel RS-232 Line Driver/Receiver w/ +/-15-kV ESD Protection
LDO Regulator Pos 5V 0.15A Automotive 5-Pin SOT-23 T/R
SP Amp Limiting Amp Single 3.6V 16-Pin VQFN EP T/R
Single Micropower, 2.5-V, RRIO, Single Supply Amplifier
Operational Amplifiers - Op Amps Dual JFET-Input
TEXAS INSTRUMENTS - MAX3223ECPWG4 - Transceiver RS232, 2 Drivers, ± 15-kV ESD Protection, 3V-5.5V supply, TSSOP-20
The CD4503BEG4 is a CMOS hex non-inverting buffer from Texas Instruments with three-state outputs and two independent output-enable control inputs, packaged in a 16-pin through-hole DIP. It operates from 3V to 18V supply voltage and is compatible with both CMOS and TTL logic families. Ideal for bus expansion and signal level conversion in low-power digital logic designs.
Quint Transmitter Triple Receiver RS-232 28-Pin SSOP Tube
The MAX3223CDBE4 is a multichannel RS-232 line driver and receiver IC from Texas Instruments, operating from 3 V to 5.5 V supply and compliant with EIA/TIA-232-F and V.28 standards. It integrates two drivers and two receivers with Schmitt-trigger inputs for robust noise immunity in serial communication designs. Available in a 20-pin SOIC package with worldwide distribution.
The XPS63805YFFT is a 2A high-efficiency buck-boost switching converter from Texas Instruments, capable of maintaining regulated output voltage when input voltage is above, equal to, or below the output. It operates across a wide input range and integrates the power switches in a compact BGA package. Designed for applications requiring seamless transition between buck and boost modes from a single-cell Li-ion battery.
SOIC-16
Power Over Ethernet PD Controller 0V 57V 90W 20-Pin VQFN EP
Fast Transient Response, 1-A, Low-Dropout Voltage Regulators
Use the download button to access the XTR305IRGWT schematic symbol, PCB footprint, and 3D model.
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote