Texas Instruments

LOGIC GATES AND INVERTERS

Buffers & Line Drivers Quad Bus Buffer Gate With 3-State Outputs

Supervisory Circuits w/Prog Watchdog Window

The TPS2104DBVT is a dual-input single-output MOSFET power distribution switch for automated power-source selection in a 5-pin SOT-23 package. It manages OR-ing of 2 supply rails with priority logic, eliminating external discrete MOSFETs in space-constrained battery-backup and USB power path applications.

LVDS Interface IC Quad LVDS Transmitter

The PTLV9002IDDFR is a dual-channel, 1MHz rail-to-rail input/output operational amplifier from Texas Instruments. It operates on a wide supply range of 1.8V to 5.5V with a maximum input offset voltage of 2000µV and 63dB CMRR. Available in an 8-pin SOT-23 package with worldwide shipping.

The CD54HCT240F3A is an 8-channel inverting tri-state bus driver from Texas Instruments' HCT family in a ceramic 20-pin DIP package, with 50 pF load capacity and dual active-low output enables. Available from stock with worldwide shipping.

Adjustable precision shunt regulator

Current Sense Amplifiers Voltage output high-side measurement current shunt monitor 6-SC70 -40 to 125

LDO Voltage Regulators Ultra Low-Power 100-mA LDO

Gate Drivers 120V Boot 3-A Peak HF HS/LS Driver

Adjustable precision shunt regulator

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin CDIP Tube

The CD54HCT273F is an octal D-type flip-flop with active-low reset in a 20-pin ceramic DIP package, operating at up to 16 MHz clock with TTL-compatible inputs for 5 V bus interfacing. Suited for military and high-reliability data bus latching applications with worldwide availability.

Switching Voltage Regulators SIMPLE SWITCHER , 36V 3A Synchronous Step-Down Converter 12-SON -40 to 125

SN75188NSRG4 is a quad RS-232 line driver from Texas Instruments compliant with EIA/TIA-232-E in a 14-pin SOP package. It features 4 gated single-input drivers with differential outputs meeting V.28 standards. Available from stock worldwide with competitive pricing for serial communication designs.

Phase Locked Loops - PLL 6.4-GHz low-power wideband RF synthesizer 40-VQFN -40 to 85

Use the download button to access the DRV8876PWPT schematic symbol, PCB footprint, and 3D model.

The UC1843J883B is a current-mode PWM controller from Texas Instruments in an 8-pin ceramic DIP package. It features a 1A gate drive output, input voltage range of 8.2V to 30V, and is MIL-STD-883 qualified for high-reliability applications. Available from stock with worldwide shipping.

The TMS320LF2407PGEA is a 16-bit fixed-point DSP-based microcontroller from Texas Instruments running at up to 20 MHz, featuring a 16-bit address and data bus, barrel shifter, and JTAG boundary scan in a surface-mount QFP package. Designed for real-time motor control and power conversion, it integrates dedicated peripherals for digital signal processing in embedded control applications.

Buck Regulator with LDO 2.5V to 5.5V

MCU 32-bit C28x RISC 16KB Flash 3.3V 48-Pin LQFP Tray

The LM3432MHX is a 6-channel LED lighting driver IC designed for LCD backlight and general LED panel applications in a 28-pin thin small-outline package with exposed heat sink. It provides independent control of 6 LED string segments without multiplexed scanning, ensuring uniform brightness across multiple LED channels. Available from authorized distributors with worldwide shipping for lighting and display system designs.

LVDS Interface IC 3.3-V LVDS Quad Channel High-Speed Differential Line Driver 16-TSSOP -40 to 85

Processor Supervisor 1.25V/2.25V 2.5V/3V/3.3V/5V 8-Pin SOIC T/R

Supervisory Circuits Processor with Power-Fail

Processor Supervisor 1.25V/2.63V 2.5V/3V/3.3V/5V 8-Pin HVSSOP EP T/R

Processor Supervisor 1.25V/4.55V 2.5V/3V/3.3V/5V 8-Pin HVSSOP EP Tube

40V, bi-directional, high-precision current sense amplifier w/ picoamp IB & ENABLE

Automotive 24-bit, 40-kSPS, 5-ch delta-sigma ADC with PGA, VREF and IDACs

Linear Voltage Regulators 3P 1.5A Fixed 8V Pos Vltg Reg

MCU 16-bit MSP430 RISC 512KB Flash 2.5V/3.3V 100-Pin LQFP

24-bit, 40-kSPS, 2-ch delta-sigma ADC with ±20-V input, PGA, IDACs, GPIOs and VREF

Texas Instruments UC28025NG4, PWM Current Mode Controller, Dual 1.5 A, 1000 kHz, 9 → 30 V, 16-Pin PDIP

Texas Instruments SN74LV4040ADG4 is a 12-bit asynchronous binary up-counter in the LV logic family rated for 50MHz operation in a 16-pin SOIC package. Supports 50pF load capacitance and 12mA IOL output drive for frequency division and event counting. Available from authorized distributors with worldwide shipping.

Operational Amplifiers - Op Amps Dual Adv LinCMOS Rail-to-Rail

TL054ACDE4 is a operational amplifier IC by Texas Instruments. Key specs: SOIC package, 14 pins, 70°C maximum. From inquiry pricing, in stock with worldwide shipping.

RS-422/RS-485 Interface IC 3.3-V to 5-V RS-485 transceiver with +/-18-kV IEC ESD protection 8-VSSOP -40 to 125

The TPS2834DG4 is a dual MOSFET half-bridge power driver from Texas Instruments with a 3.5A peak output current. It features high-side driver capability, standard input/output characteristics, and is housed in a 14-pin SOIC package. Available from stock with competitive pricing and worldwide shipping.

Texas Instruments UCC5638FQPG4, SCSI Bus Terminator, 15bit-Bits, 48-Pin LQFP

The UCC3957M-1 is a lithium-ion battery protector IC from Texas Instruments supporting selectable 3 or 4-cell operation with integrated overcurrent protection in a 16-pin SSOP package. It monitors up to 4 Li-Ion cells for overvoltage, undervoltage, and overcurrent conditions to safeguard battery packs. Available from stock with worldwide shipping.

The UCC3957M-3G4 is a Lithium-Ion battery protector circuit IC from Texas Instruments supporting selectable 3-cell or 4-cell configurations with overcurrent protection in a 16-pin SSOP package. It monitors and protects Li-Ion battery packs against overcharge, overdischarge, and overcurrent fault conditions. Available from authorized distributors with worldwide shipping.

VSP1021 is a integrated circuit for board-level control by Texas Instruments. Key specs: QFP package, 48 pins, 1-Channel. From inquiry pricing, in stock with worldwide shipping.

The UCC3813N-3G4 is a current-mode PWM controller IC from Texas Instruments. It supports input voltages from 4V to 12V, switching up to 1000 kHz with 1A peak output drive in an 8-pin PDIP package. From $0.85 in stock worldwide shipping.

UCC3818APWG4 is a integrated circuit for board-level control by Texas Instruments. Key specs: SOIC package, 16 pins, 70°C maximum. From inquiry pricing, in stock with worldwide shipping.

UCC3813PW-3G4 is a BiCMOS current-mode PWM controller operating from 4 V to 12 V supply with 1 A peak gate drive output and switching frequency up to 1000 kHz, packaged in an 8-pin TSSOP for low-power offline and isolated converter designs. It integrates oscillator, error amplifier, and cycle-by-cycle current limit with very low startup current. Available in stock globally for cost-efficient flyback and forward converter applications.

Texas Instruments UCC3813PW-5G4, PWM Current Mode Controller, 1 A, 1000 kHz 8-Pin TSSOP

Texas Instruments UCC3819APW, Power Factor Pre-Regulator Circuit, 115 kHz, 17 V 16-Pin, TSSOP

Texas Instruments UCC3807D-3G4, PWM Current Mode Controller, 1 A, 1000 kHz 8-Pin SOIC

UCC3813N-4G4 is a Texas Instruments integrated circuit for industrial electronics. It offers 2 pins, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.