Texas Instruments

The PTLV9064QDRQ1 is a quad-channel, 10 MHz, low-noise, rail-to-rail input/output CMOS operational amplifier from Texas Instruments designed for cost-sensitive automotive and industrial systems. It delivers 80 dB minimum CMRR with voltage-feedback architecture and frequency compensation across all 4 channels in a 14-pin SOIC package. The device targets signal conditioning, active filters, and sensor interface circuits where compact integration and rail-to-rail swing are critical.

Texas Instruments PTPS23881RTQT is a high-power 8-channel Power-over-Ethernet PSE controller with 200 mΩ integrated RSENSE, operating from a 3V to 3.6V supply in a 56-pin QFN package. Available from stock worldwide with fast shipping.

AEC-Q100, 36V, bi-directional, low-/high-side, voltage output CSA with window comparator

Automotive 300-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator

Supervisory Circuits Ultra-Low Voltage Processor

The Texas Instruments SN74ALS193ANE4 is a 4-bit synchronous binary up/down counter from the ALS logic family, clocking up to 30 MHz with parallel load capability and separate up/down clocks. It is housed in a 16-pin PDIP package for through-hole applications.

Conv DC-DC 0.8V to 3.3V Step Up Single-Out 3.3V 0.2A 10-Pin VSSOP T/R

SP Amp Current Sense Amp Single R-R O/P 5.5V 6-Pin SOT-563 T/R

Switching Controllers Wide Input Sync Buck Cntrlr w/DDR trking

Display Drivers & Controllers DLP- Display Controller for DLP230NP (0.23 1080p) DMD 176-NFBGA

Digital to Analog Converters - DAC 8-Bit 2.5-12 us Dual DAC

Switching Voltage Regulators 4.5-25Vin,6A Step- Down Converter

Texas Instruments PINA293A4QDBVRQ1 is a current-feedback operational amplifier in a 5-pin SOT-23 package, featuring 160 dB typical CMRR and 110 V common-mode voltage range. From $1.20, in stock, worldwide shipping.

RS-232 Interface IC 3V-5.5V Multichannel RS-232 Line Drvr/Rec

SN74S09NE4 is a quad 2-input positive-AND gate with open-collector outputs by Texas Instruments in the Schottky TTL (S) logic family. Key specs: 4 independent AND gates, 20 mA max open-collector output, 14-pin DIP package. Available from stock with worldwide shipping.

Op Amp Dual High Speed Amplifier R-R I/O ±1.8V/3.6V 8-Pin SOIC T/R

AND Gate 1-Element 2-IN CMOS 5-Pin SOT-23 T/R

Switching Voltage Regulators 7V-18Vin,4.5A Sync Step-Down DCAP2 Mode

Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R

UART 4-CH 65byte FIFO 1.8V/2.5V/3.3V/5V 64-Pin LQFP T/R

UART 4-CH 65byte FIFO 1.8V/2.5V/3.3V/5V 64-Pin LQFP T/R

Buffers & Line Drivers Octal Buffer Driver

Use the download button to access the MC3403D schematic symbol, PCB footprint, and 3D model.

Buffers & Line Drivers 20-Bit Buffer/Driver With 3-State Outputs

UART 4-CH 65Byte FIFO 1.8V/2.5V/3.3V/5V 64-Pin LQFP Tray

4-bit dual-supply bus transceiver with 3-state outputs and independent direction control inputs

Automotive-grade 10A/10A single-channel isolated gate driver for bipolar supply from Texas Instruments. Features differential input, standard output polarity, and 17A peak output current limit. Available in SO-8 package with global stock and worldwide shipping.

LDO Regulator Pos 5V 0.15A 5-Pin SOT-23 T/R

12-Channel I2C constant-current RGB LED driver

The TPS62054DGSG4 is a PWM/PFM step-down switching voltage regulator from Texas Instruments with 800 mA output and 1.8 V fixed output voltage. It supports input voltages from 2.7 V to 10 V with voltage-mode PWM control and automatic PFM at light loads for efficiency optimization. Available in 10-pin MSOP package with in-stock worldwide shipping.

IC RS485 TXRX 1MBPS 8-SOIC

LDO Regulator Pos 3V 0.15A 5-Pin SOT-23 T/R

Texas Instruments CD74HC191MG4 is a high-speed CMOS synchronous 4-bit binary up/down counter with preset load and ripple-carry output, operating from 2 V to 6 V. It supports bidirectional counting, synchronous parallel load, and drives 50 pF loads in a 16-pin SOIC package. Available from stock worldwide with fast shipping.

Use the download button to access the DRV8874QPWPRQ1 schematic symbol, PCB footprint, and 3D model.

Fault-protected RS-485/RS-422 line transceiver from Texas Instruments supporting ±70V bus fault protection and 3.3V to 5V operation. Features IEC ESD protection, differential Schmitt trigger input, and complies with EIA-485-A and EIA-422-B standards. Available in an 8-pin SON package rated from -40°C to 125°C with worldwide shipping.

Texas Instruments TS5A3159DCKTE4 is a single-channel SPDT analog switch with 1.1 ohm on-resistance and 63 dB off-state isolation. It operates from 1.65 V to 5.5 V in a compact SC-70 6-pin package. Suited for portable and IoT signal routing applications.

Digital Isolator CMOS 6-CH 100Mbps Automotive 16-Pin SSOP T/R

Digital Isolator CMOS 6-CH 100Mbps Automotive 16-Pin SSOP T/R

Voltage References Micropower Voltage Reference

RS-485 Interface IC +/-70-V fault-protected 3.3-V to 5-V RS-485 transceiver with IEC ESD 8-VSSOP -40 to 125

RS-485 Interface IC

IC OCT TRANSP LATCH HS 3ST 20DIP

The SN74LVC10APWRE4 is a triple 3-input NAND gate IC from Texas Instruments, belonging to the LVC (Low-Voltage CMOS) logic family with 24mA output drive capability and 1.65V to 3.6V operating voltage range in a 14-pin TSSOP package. It provides three independent NAND logic functions with 5V-tolerant inputs for mixed-voltage interfacing. RoHS compliant with worldwide distribution.

Operational Amplifiers - Op Amps Advanced LinCMOS Rail-To-Rail Dual

Use the download button to access the TPS54373PWPR schematic symbol, PCB footprint, and 3D model.

Digital Bus Switch ICs DUAL INVERTER

Use the download button to access the ISO7721BDWR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps 180-V, wide bandwidth (6.5 MHz), high-slew rate (25 V/ s) unity-gain stable op amp 8-SO PowerPAD -40 to 85

High-Voltage, High-Current (30-mA) Operational Amplifier

LVDS Interface IC Single Full-Duplex LVDS Transceiver