Texas Instruments

Use the download button to access the PAL16R6AMJB schematic symbol and PCB footprint.

14-stage binary ripple counter with integrated RC/crystal oscillator, 10 buffered output stages available, and asynchronous reset in HC CMOS logic. Operates from 2 V to 6 V supply, 16-pin TSSOP package with 50 pF load capacitance rating. Available from Texas Instruments, Pb-free/RoHS-compliant, with worldwide stocking.

POPA4990IDR is a quad low-power operational amplifier from Texas Instruments featuring 1 MHz bandwidth, 40 V supply range, rail-to-rail input and output, and 115 dB CMRR. Packaged in a 14-pin SOIC, it targets industrial sensing, motor drives, and battery monitoring circuits.

16-bit Microcontrollers - MCU Ultra low power Micro Controller

Op Amp Quad Auto Zero Amplifier R-R O/P ±18V/36V 14-Pin TSSOP Tube

Clock Drivers & Distribution 3.3V x4 Clock Mult

Voltage References NRND, alternate is LM4051AIM3-ADJ/NO

The PTLV9304IDR is a quad 1 MHz, 40 V rail-to-rail output, MUX-friendly operational amplifier from Texas Instruments with 95 dB minimum CMRR and 2500 µV maximum offset, targeting cost-sensitive multiplexed signal conditioning, housed in a 14-pin SOIC package. It combines wide supply range with fast settling for high-channel-count acquisition systems.

Linear Battery Charger Li-Ion/Li-Pol 300mA 3.6V to 4.65V 25-Pin DSBGA T/R

Use the download button to access the LM51551QDSSTQ1 schematic symbol, PCB footprint, and 3D model.

Texas Instruments POPA990SIDBVR is a single 1 MHz, 40 V rail-to-rail input/output operational amplifier with 1750 µV max input offset voltage. It delivers 115 dB typical CMRR in a 6-pin SOT-23 package. Available from stock with worldwide shipping.

SN5476J is a dual JK-type positive-pulse master-slave flip-flop in TTL logic family, housed in a 16-pin ceramic DIP package and rated for operation up to 15 MHz clock frequency. With 15 pF load capacitance and military-grade ceramic packaging, it is used in sequential logic counters, shift registers, and frequency dividers in legacy high-reliability digital systems.

32-bit Microcontrollers - MCU Piccolo MCU w/ InstaSPIN-FOC

PTLV9301IDBVR is a single-channel 1 MHz, 40 V rail-to-rail output (RRO), MUX-friendly operational amplifier in a 5-pin SOT-23 package, designed for cost-sensitive systems. It features 110 dB typical CMRR and a maximum input offset voltage of 2500 µV, suited for signal conditioning and measurement applications.

Current Mode PWM Controller 1A 1000kHz 8-Pin TSSOP T/R

Latches Tri-St Octal D-Type

Texas Instruments RWY0009A is a 2.75 V to 6 V input, adjustable-frequency step-down DC-DC converter offering programmable switching frequency and high conversion efficiency for compact power supply designs. Available in stock with worldwide shipping.

The TPS76928DBVRG4 is an ultra-low-power 100 mA fixed-output LDO voltage regulator from Texas Instruments with a typical dropout voltage of only 71 mV. It supports input voltages from 3.129 V to 10 V and features a maximum dropout of 245 mV at full load. Available in a 5-pin SOT-23 package with RoHS-compliant lead-free construction and worldwide shipping.

LDO Regulator Pos 2.8V 0.1A Automotive 5-Pin SOT-23 T/R

Logic Gates Quad 2-Input NAND Gates

Latches Tri-St Octal D-Type

High Speed Operational Amplifiers Hi-Vltg Hi-Slew-Rate Current Feedback

The ONET4201PARGTRG4 is a 4.25 Gbps SDH/SONET laser driver IC from Texas Instruments. It features a 16-pin VQFN package with integrated heat sink and supports single-channel optical transmission. Available from leading distributors with worldwide shipping.

Octal Channel Octal ADC SAR 600ksps 14-bit Parallel/Serial 64-Pin VQFN EP T/R

Analog Comparators Quad Diff Comparator

QFN-16

LVDS Interface IC 2Gbps Diff

Buffers & Line Drivers 16-Bit Bus Trnscvrs With 3-State Outputs

The SN74AHCT14PWE4 is a hex Schmitt-trigger inverter from Texas Instruments in the AHCT logic family, providing 6 independent single-input inverters with hysteresis inputs. It operates from a 4.5 V to 5.5 V supply and delivers 8 mA output sink current in a 14-pin TSSOP package.

The CD74HC541EE4 is a high-speed CMOS octal buffer and line driver with 3-state outputs from Texas Instruments in a 20-pin DIP package. It features dual active-low output enable controls, 2V to 6V supply range, and unidirectional drive with 50 pF load tolerance. Available from stock worldwide with competitive pricing.

Digital Bus Switch ICs Lo-Vltg Single FET Bus Sw

MCU 16-bit MSP430 RISC 16KB Flash 2.5V/3.3V 28-Pin TSSOP T/R

Overvoltage Protection for 2-Series, 3-Series, and 4-Series Cell Li-Ion

Digital Bus Switch ICs Lo-Vltg Single FET Bus Sw

3-Series to 5-Series Stackable Ultra-Low-Power Primary Protector With Autonomous Cell Balancing

Battery Management Sgl Cell Switchmode Li-Ion Batt Charger

14-bit, 3.5-MSPS, dual, simultaneous-sampling SAR ADC with internal reference and enhanced SPI

24-bit 32-kSPS 4-channel simultaneous-sampling delta-sigma ADC

SN74LV07APWTG4 is a hex buffer and line driver with open-drain outputs, operating from 1.65 V to 5.5 V, providing 6 independent non-inverting channels with 16 mA sink current capability and 50 pF load tolerance, housed in a 14-pin TSSOP package for voltage-level translation and open-drain bus applications in low-voltage digital systems.

Encoders, Decoders, Multiplexers & Demultiplexers

Multiplexer/Register 1-Element Bipolar 8-IN 16-Pin CDIP Tube

Counter Single 8-Bit Binary UP 16-Pin CDIP Tube

4.5-V to 28-V input, 6-A synchronous buck converter with ULQ-mode

Gate Drivers 6-Ch Ser Interface Lo-Side Dr

Switching Voltage Regulators 4.2-V to 42-V, 0.6-A ultra-small synchronous step-down converter 12-VQFN-HR -40 to 125

Gate Drivers Isolated dual-channel gate driver with single input in LGA for automotive 48-V systems with 5-V UVLO 13-VLGA -40 to 125

LVDS Receiver 250Mbps 16-Pin SOIC T/R

Use the download button to access the TPS62054DGSR schematic symbol, PCB footprint, and 3D model.

CD74HC191M96E4 is a presettable 4-bit synchronous binary up/down counter IC from Texas Instruments in a 16-pin SOIC package. It supports bidirectional counting up to 20 MHz at 50 pF load with a ripple carry output (RCO) for cascading. Available on 96-unit tape-and-reel for automated SMT assembly in digital timing and sequencing circuits.

RS-232 Interface IC Multichannel RS-232 Line Drv/Rcvr