Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,509
Total Products
126
Categories
All Texas Instruments Components
Showing 8,051–8,100 of 41,509
Texas Instruments TPS2012PWRG4 is a single-channel high-side MOSFET power switch supporting 2.0 A continuous current from a 2.7 V to 5.5 V supply in TSSOP-14 package. Provides overcurrent protection and controlled turn-on for USB and backplane power distribution. Available from stock worldwide with fast shipping.
Quad Receiver RS-232 14-Pin CDIP Tube
OPA735AID Texas Instruments, Op Amp, 1.6MHz, 3 → 9 V, 8-Pin SOIC
Dual Receiver 14-Pin CDIP Tube
HPA02163RGER is a Switching Charge Management Li-Ion/Li-Pol 4500mA 3.5V to 4.4V 24-Pin VQFN EP T/R by Texas Instruments. Key specs: 25 pins, -40°C to 85°C, 4500mA. From inquiry pricing, available through FindMyChip sourcing with worldwide shipping.
Bus Transceivers Hi-Spd CMOS Non-Inv Octal-Bus Xcvr
Texas Instruments UCC28515NE4 is a power factor controller with post regulator in DIP-20 package, featuring current-mode control and 10.8V–15V input range. Ideal for high-efficiency AC-DC converters. RoHS compliant, in stock worldwide shipping.
Texas Instruments TCM320AC37CDW is a voice-band audio processor CODEC with A-Law companding, 13-bit linear coding, and synchronous/asynchronous operation in a 20-SOIC package. From $4.00 in stock, worldwide shipping.
Quad Receiver RS-422/RS-423/RS-485 16-Pin CDIP Tube
The TCA9511A is a 3.3V I2C bus buffer from Texas Instruments in an 8-pin VSSOP package for bidirectional signal buffering. Supports Hot-Swap capability and bus capacitance buffering to extend I2C bus length and isolate bus segments. Available from stock with worldwide shipping.
Inverters HEX INVERTER
Dual Transmitter 14-Pin CDIP Tube
Analog to Digital Converters - ADC Dual Channel 12B 900Msps ADC
Buffers & Line Drivers Hex Inverting Bus Drivers With 3-State Outputs 16-CDIP -55 to 125
The PUCC27288DR is a 120V half-bridge MOSFET gate driver from Texas Instruments with 2.5A to 3.5A peak output current, 8V UVLO protection, and no internal bootstrap diode. It features totem-pole output, high-side driver support, and standard input compatibility in a compact 8-pin SOIC package. Available in stock worldwide for motor drive and power conversion designs.
Logic Gates Triple 3-input NOR gates with Schmitt-trigger inputs 14-SOIC -40 to 125
AND Gate 4-Element 2-IN CMOS 14-Pin SOP T/R
LED Lighting Drivers 4-V to 30-V input voltage, 1.5-A output current, synchronous buck LED driver with dimming options
Single Transmitter/Receiver RS-485 16-Pin VQFN EP T/R
Buffers & Line Drivers Automotive hex inverter with Schmitt-trigger inputs 14-SOIC -40 to 125
LED Lighting Drivers 4-V to 30-V input voltage, 1.5-A output current, synchronous buck LED driver with dimming options
SN54LS155A Dual 2-Line To 4-Line Decoders/Demultiplexers
Bus XCVR Single 8-CH 3-ST Automotive 20-Pin SOIC T/R
Bus XCVR Single 8-CH 3-ST Automotive 20-Pin TSSOP T/R
Translation - Voltage Levels Octal TTL-To-ECL Translator
Digital Signal Processors & Controllers - DSP, DSC Fxd-pt Dig Sig Proc Mil enhanced
Flip-Flops Octal Edge-Triggered D-Type
Switching Controllers Phase Shift Resonant Controller 20-CDIP -55 to 125
The UC1875J883B is a phase-shift resonant PWM switching controller from Texas Instruments designed for full-bridge zero-voltage switching power converter topologies, operating from a 10.5 V to 18 V supply. It supports both voltage-mode and current-mode control techniques, provides 4 gate drive outputs for full-bridge FET switching, and is housed in a ceramic 20-pin DIP package rated for -55°C to 125°C. The device is qualified to MIL-883B standards, making it suitable for aerospace, defense, and high-reliability industrial power conversion applications.
SN74LS147J is a 9-to-4 line priority encoder in the LS logic family, housed in a ceramic 16-pin DIP package. It encodes the highest-priority active-low input among 9 input lines into a 4-bit BCD output at 15 pF load capacitance. Used for keyboard encoding, interrupt priority controllers, and analog-to-digital converters in legacy and industrial digital systems.
Ethernet ICs
FIFO 32768 x 18 Synch FIFO Memory
TEXAS INSTRUMENTS - SN74ALS623ADW - Transceiver, 74ALS623, 4.5 V to 5.5 V, SOIC-20
Analog to Digital Converters - ADC 10 Bit 40 MSPS Lo-Pwr
CC2652RB is a 49 pins microcontroller by Texas Instruments. Key specs: 49 pins, Quad Flat No-Lead package, Multi-Protocol 2.4-GHz Wireless Microcontroller. From quote-based sourcing, in stock checks support worldwide shipping.
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin TSSOP Tube
Texas Instruments TRS3227IDB is a single-channel RS-232 line driver/receiver operating from a 3 V to 5.5 V supply with ±15 kV ESD protection and Schmitt-trigger inputs in a 16-pin SOIC package. Available from stock with worldwide shipping.
MCU 16-bit MSP430 RISC 8KB Flash 2.5V/3.3V 48-Pin VQFN EP T/R
16-bit Microcontrollers - MCU Mixed Signal MCU
The SN74LS147D is a Texas Instruments 9-to-4 line priority encoder from the LS logic family, accepting 9 active-low inputs and producing a BCD output in a 16-pin SOIC package. It prioritizes the highest active input line and provides encoded binary output for keypad scanning and interrupt arbitration. Available from stock worldwide with competitive pricing.
Encoders, Decoders, Multiplexers & Demultiplexers 10-Line to 4-Line BCD Priority Encoder 16-PDIP 0 to 70
Texas Instruments SN74AHCT374DGVRG4 is an octal D-type edge-triggered flip-flop with 3-state outputs, operating up to 75 MHz in a 20-pin VSOP package. It features active-low output enable and AHCT logic family compatibility for 5 V input signals. Designed for data bus latching, pipelining, and address register applications in digital systems.
DIP-14
LVDS Repeater 250Mbps 0.65V 16-Pin SOIC T/R
16-bit Microcontrollers - MCU Mixed Signal MCU
LM158AWG-QMLV is a dual operational amplifier in a 10-pin small outline package, qualified to MIL-SPEC QML-V standards. It features voltage-feedback architecture, 70 dB common-mode rejection ratio, 4 mV maximum input offset voltage, and operates from a single 3 V to 32 V supply. Designed for high-reliability aerospace and defense signal conditioning applications.
OPA2703UA Texas Instruments, Precision, Op Amp, RRIO, 1MHz, 5 V, 9 V, 8-Pin SOIC
Bus Switch 2-Element CMOS 2-IN 8-Pin TSSOP T/R
Current Sense Amplifiers 26V, dual channel, 350kHz current sense amplifier 8-WSON -40 to 125
Current Sense Amplifiers 26V, dual channel, 350kHz current sense amplifier 8-WSON -40 to 125
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote