Texas Instruments

32-bit Microcontrollers - MCU C2000 32-bit MCU with 100 MHz, 128 KB Flash, 12 PWM

STANDALONE 17-V, 3-A SINGLE CELL

The UCC29421PWG4 is a DC-DC switching controller IC from Texas Instruments featuring configurable peak current mode and programmable PFM technique. It supports input voltages from 1.8V to 8V and is housed in a 16-pin TSSOP package, making it suitable for low-power portable and embedded applications.

Gate Drivers 3-A, 120-V half bridge gate driver with 5-V UVLO, interlock and enable 8-SOIC -40 to 125

Digital Signal Processors & Controllers - DSP, DSC Fixed-Point DSP 144-NFBGA -40 to 100

Current Sense Amplifiers -4 to 100-V, 1-MHz current sense amplifier

The Texas Instruments TMS320F2808NMFA is a C2000 32-bit DSP microcontroller built on the C28x core, running at up to 100 MHz with 128 KB of on-chip Flash and 12 PWM channels for advanced real-time control. It integrates an ADC, floating-point processing, and boundary scan capability, making it a powerful solution for digital motor control and digital power conversion applications. Housed in a compact BGA package and RoHS-compliant, it is available for worldwide shipping.

32-bit Microcontrollers - MCU C2000 32-bit MCU with 100 MHz, 128 KB Flash, 12 PWM

Use the download button to access the TMUX1575YCJR schematic symbol, PCB footprint, and 3D model.

Power Switch ICs - Power Distribution 36-V, 8-m , 1-ch smart high-side switch with current monitoring 16-HTSSOP -40 to 125

Operational Amplifiers - Op Amps AEC-Q100, 4-Channel, 10-MHz, low-noise, RRIO, CMOS op amp 14-TSSOP -40 to 125

Digital to Analog Converters - DAC 2.7V to 5.5V 10-Bit 8-Ch Ser

MOSFET 30-V, N channel NexFET power MOSFET, dual SON 2 mm x 2, 42 mOhm, gate ESD protection 6-WSON -55 to 150

Digital to Analog Converters - DAC 2.7V to 5.5V 10-Bit 8-Ch Ser

Digital Signal Processors & Controllers - DSP, DSC Fixed-Point DSP 144-NFBGA -40 to 100

Logic Gates Triple 3-input AND gates with Schmitt-trigger inputs 14-SOIC -40 to 125

Supervisory Circuits Low-voltage supervisor with adjustable-reset time delay and manual reset 5-SOT-23 -40 to 125

Conv DC-DC 3V to 36V Synchronous Step Down Single-Out 1V to 34.2V 6A Automotive T/R

Analog Comparators Dual industrial grade standard comparator

Current Sense Amplifiers 26V, dual channel, bi-directional, 350kHz current sense amplifier

Digital to Analog Converters - DAC 2.7V to 5.5V 10-Bit 8-Ch Ser

Inverters Lo PWR SNGL Invrtr Gate

LDO Voltage Regulators Automotive, 300-mA, low-IQ, high-PSRR, LDO voltage regulator with high accuracy and enable

Texas Instruments BQ27621-G1 is a system-side single-cell Li-Ion battery fuel gauge IC using Dynamic Voltage Correlation (DVC) technology to estimate state of charge without coulomb counting. It communicates via I2C interface and requires no sense resistor, reducing BOM cost and PCB space. Available in BGA packaging for compact wearable and IoT device designs with worldwide distribution.

The TPS7A2030PDBVR is an ultra-low-noise, low-quiescent-current 300 mA LDO linear regulator from Texas Instruments with a fixed 3.0V output, 145 mV maximum dropout at full load, high PSRR, and a 3.3-6V input range in a tiny SOT-23-5 package. It is optimized for noise-sensitive analog, RF, and precision sensor applications. Available in tape-and-reel packaging with worldwide distribution.

Flip Flop D-Type Bus Interface Pos-Edge Push-Pull 1-Element 16-Pin TSSOP T/R

Use the download button to access the TPS78428QDBVRQ1 schematic symbol, PCB footprint, and 3D model.

Inverters Lo PWR SNGL Invrtr Gate

Mixed-Signal Microcontroller

LDO Voltage Regulators 300-mA, ultra-low-noise, low-IQ, low-dropout (LDO) linear regulator with high PSRR

LDO Voltage Regulators Automotive, 300-mA, low-IQ, high-PSRR, LDO voltage regulator with high accuracy and enable

LDO Voltage Regulators Automotive, 300-mA, low-IQ, high-PSRR, LDO voltage regulator with high accuracy and enable

LDO Voltage Regulators Automotive, 300-mA, low-IQ, high-PSRR, LDO voltage regulator with high accuracy and enable

LDO Voltage Regulators Automotive, 300-mA, low-IQ, high-PSRR, LDO voltage regulator with high accuracy and enable 5-SOT-23 -40 to 150

LDO Voltage Regulators Automotive, 300-mA, low-IQ, high-PSRR, LDO voltage regulator with high accuracy and enable 5-SOT-23 -40 to 150

Texas Instruments UCC2807N-1G4 is a current-mode PWM controller with 1A output in an 8-pin PDIP package. Operates from 7.5V to 12V input voltage with pulse-width modulation control technique. Available from stock with worldwide shipping.

The LM3S5732-IQR50-A0T is a 32-bit ARM Cortex-M3 microcontroller with 128KB Flash memory, integrated ADC and DMA, operating at up to 16.384 MHz and supporting 2.5V, 3V, and 3.3V supply voltages in a 64-pin LQFP tape-and-reel package. It includes boundary scan support for board-level testing. Available from authorized distributors with worldwide shipping.

MCU 16-bit MSP430 RISC ROMLess 2.5V/3.3V 24-Pin VQFN EP T/R

Use the download button to access the TPS78418QDBVRQ1 schematic symbol, PCB footprint, and 3D model.

RF System on a Chip - SoC Single-chip 60-GHz to 64-GHz intelligent mmWave sensor integrating processing capability 161-FC/CSP -40 to 105

Use the download button to access the TPS7A2025PDBVR schematic symbol, PCB footprint, and 3D model.

Motor/Motion/Ignition Controllers & Drivers 48-V, 2.5-A bipolar stepper or dual brushed motor driver with integrated current sensing 24-VQFN -40 to 125

Use the download button to access the TPS7A2050PDBVR schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators 300-mA, ultra-low-noise, low-IQ, low-dropout (LDO) linear regulator with high PSRR 5-SOT-23 -40 to 125

Use the download button to access the TPS7A2012PDBVR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the DRV8434RGER schematic symbol, PCB footprint, and 3D model.

Motor / Motion / Ignition Controllers & Drivers 48-V, 2.5-A bipolar stepper or dual brushed motor driver with integrated current sensing 24-VQFN -40 to 125

V-Ref Adjustable 1.24V to 10V 12mA 3-Pin SOT-23 T/R

The UCC2583DG4 is a current-mode PWM secondary-side controller from Texas Instruments designed for post-regulation in isolated power supplies with an 8.9V to 14V input range. It provides precise pulse-width modulation control for secondary-side regulation in a 14-pin SOIC package. Available from stock with worldwide shipping.

32-bit Microcontrollers - MCU C2000 32-bit MCU with 100 MHz, 32 KB Flash, 6 PWM