Texas Instruments

Use the download button to access the ADC3222IRGZR schematic symbol, PCB footprint, and 3D model.

The BQ34210IPWQ1 is an automotive-grade 1-series cell system-side CEDV fuel gauge IC optimized for rarely discharged battery applications in a 14-pin SOIC package. It provides accurate state-of-charge estimation using Compensated End-of-Discharge Voltage algorithm without requiring a learning cycle. Available from authorized distributors worldwide with competitive pricing and ready stock.

IC BATT PROT LI-ION 2-4CELL 8SON

Battery Management Overvoltage protection device for 2- to 3-cell Li-ion batteries, with 4.38-V OVP 6-WSON -40 to 85

Battery Battery Protection IC Lithium Ion 8-TSSOP

Battery Battery Protection IC Lithium Ion 8-TSSOP

Battery Battery Protection IC Lithium Ion 8-TSSOP

BQ24007PWPR

Isolation Amplifiers Automotive +/-50-mV input, precision reinforced isolated amplifier with integrated DC/DC converter

Texas Instruments ADS61B23IRHBR is a 12-bit pipelined analog-to-digital converter with 1 single-ended input channel in a 32-pin VQFN (5x5 mm) package. It accepts a ±2 V peak-to-peak input range with a linearity error below 0.0733%, suited for high-speed data acquisition. Available from stock with worldwide shipping.

TSSOP-08

Fuel Gauge Li-Ion/Li-Pol 2.5V 12-Pin VSON EP T/R

Battery Management I C controlled, 1-4-cell, 5-A buck-boost solar battery charger with dual-input selector and MPPT

Battery Battery Monitor IC Lithium Ion/Polymer 38-TSSOP

Battery Management SMBus 1- to 4-cell NVDC buck-boost battery charge controller with power path and USB-C PD OTG

Battery Management Automotive 1-cell, 1-A, LiFePO4 linear battery charger 10-WSON -40 to 125

Texas Instruments AM26C32CNS-P is a quadruple differential line receiver compliant with EIA/TIA-422 and EIA/TIA-423 standards, housed in a 16-pin SOIC package. It operates from a 5 V supply and accepts differential inputs from -10 V to +10 V. Available from authorized distributors with worldwide shipping.

BQ24003PWPR

Battery Battery Monitor IC Lithium Ion/Polymer 30-TSSOP

The Texas Instruments ADS8322Y/2K is a 16-bit successive approximation register (SAR) ADC with 1 analog input channel, a 1.6 µs maximum conversion time, and 5.25 V maximum analog input voltage in a 32-pin TQFP 5x5 mm package. It achieves 0.0122% maximum linearity error for precision measurement applications. Available from authorized distributors in 2000-piece tape-and-reel with worldwide shipping.

hebq20z70SBS-compliantgasgaugeI ncorporat ingpatent edImpedan ceTrack Thebq20z70 measuresandC maintains anaccu rate recordo

Battery Management SBS-Compliant Gas Gauge IC

Texas Instruments AFE1203E/1K is a high-speed analog front-end IC supporting data rates up to 2320Mbps, integrating signal conditioning functions in a 48-pin SSOP package for demanding broadband communications and data acquisition applications.

10 Bit Analog to Digital Converter 1 Input 1 Pipelined 28-SSOP

NFBGA-298

Analog to Digital Converters - ADC 18B,1MSPS,4Ch,Pseudo bipolar,Diff ADC

The ATL431AQDBZRG4 is a precision adjustable shunt voltage regulator with output range of 2.5V to 36V in a compact SOT-23 3-pin package. Features sharp turn-on characteristics with low reference voltage tolerance for accurate voltage regulation. Available from stock with worldwide shipping.

16-BIT 250-KSPS SAMPLING CMOS ANALOG-TO-DIGITAL CONVERTER

The AM26LV32CNS is a low-voltage, high-speed quadruple differential line receiver compliant with EIA/TIA-422-B and V.11 standards for balanced data transmission interfaces. It features four channels with differential Schmitt trigger inputs and 5 mA output sink current in a 16-pin SOIC package. RoHS-compliant and lead-free, suitable for industrial RS-422 and multi-drop communication networks.

XAM5708BCBDJEA is a cost-optimized Texas Instruments Sitara processor combining dual ARM Cortex-A15 cores with a C66x DSP and multimedia accelerators for embedded vision applications. Provides secure boot, 1.11 V to 1.2 V supply, and 538-ball BGA package for compact system designs. Available from stock with worldwide shipping.

Low-power, 12-bit, 2-channel, 1-MHz, single/dual unipolar input, ADCs with serial interface

Dual, 500kHz, 12-Bit, 2+2 Ch, Simultaneous Sampling Analog-To-Digital Converter

The 5962-7802007VEA is a military-grade RS-422 line receiver IC from Texas Instruments supporting EIA-422-B and EIA-423-B interface standards in a 16-pin ceramic DIP package. It integrates 4 differential Schmitt trigger inputs with 2.1V minimum output swing for high-noise-immunity data communications. Available from specialty distributors worldwide for defense and aerospace applications.

The AM26C31CNSR-P is a quadruple differential line driver from Texas Instruments designed for RS-422 and EIA-422 balanced data transmission. It features four independent drivers in a small outline package supporting high-speed differential signaling. Available from stock worldwide with competitive pricing.

14 Bit Analog to Digital Converter 2 Input 2 SAR 16-WQFN (3x3)

Texas Instruments AM26C32CDB is a quad differential line receiver compliant with EIA-422-B and EIA-423-B standards, featuring a ±7 V common-mode range and 60 mV typical input hysteresis. It provides four independent differential Schmitt trigger inputs in a 16-pin SOIC package. Available from stock worldwide with fast shipping.

RF Front End 0Hz ~ 75MHz AM, FM 100-HTQFP (14x14)

Transceiver, Non-Inverting 1 Element 8 Bit per Element 3-State Output 24-SOIC

HVQCCN-64

HVQCCN-64

Supervisory Circuits Low-voltage supervisor with adjustable-reset time delay and manual reset 5-SOT-23 -40 to 125

12 Bit Analog to Digital Converter 2 Input 2 Pipelined 64-VQFN (9x9)

LDO Voltage Regulators Automotive, 1-A, high-accuracy, adjustable low-dropout (LDO) linear regulator

10 Bit Analog to Digital Converter 1 Input 1 Pipelined 28-SSOP

HVQCCN, LCC48,.27SQ,20

Quad-channel, 14-bit, 1-GSPS telecom receiver and feedback IC

Dual-Channel, 11-Bit, 200-MSPS Analog-to-Digital Converter (ADC)

Analog to Digital Converters - ADC Current Shunt D-S Modulator

Use the download button to access the DRV8106HQRHBRQ1 schematic symbol, PCB footprint, and 3D model.

Supervisory Circuits Low-voltage supervisor with adjustable-reset time delay and manual reset 5-SOT-23 -40 to 125