Microchip

8-bit Microcontrollers - MCU Op Amp, 32KB Flash, 2K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

Microchip MCP3461RT-E/NC is a 16-bit delta-sigma ADC with on-chip voltage reference and internal oscillator, housed in a compact UQFN-20 package. It supports 2 differential analog input channels with ±3.6 V range and delivers up to 153.6 kSPS throughput via an SPI interface. Designed for space-constrained industrial sensors, wearable instruments, and IoT data-acquisition nodes operating from a 3.3 V supply.

Microchip PIC32MK0512MCJ064-E/R4X is a 32-bit MIPS32 microAptiv core MCU running at up to 80 MHz with 512 KB Flash in a compact 64-pin VQFN (9x9 mm) package, supporting 3.0–3.6 V operation with integrated ADC and boundary scan for motor control applications.

The MCP3464RT-E/NC is a 16-bit delta-sigma ADC with internal voltage reference, featuring 8 analog input channels in a compact UQFN-20 package. It supports differential and single-ended inputs with a 3.6 V analog input range and operates over a wide temperature range. Ideal for precision measurement applications.

The MIC2015-1.2YM6TR is a single-channel high-side power switch IC from Microchip with a fixed 1.2 A current limit in a compact SOT-23-6 package. It features kickstart, a fault flag output, and adjustable current slew rate. Designed for portable and handheld power distribution requiring overcurrent protection.

Microchip MCP16362T-E/NMX is a current-mode PWM/PFM step-down DC-DC controller IC with 4V to 48V input range in a compact 8-VDFN (3x3) package. It delivers positive output regulation with high efficiency across wide load ranges. Suitable for industrial power supplies and automotive 12V rail step-down conversion.

The Microchip PIC32MK0512MCJ048T-I/Y8X is a 32-bit PIC32 MCU with 512 KB Flash, motor-control peripherals, CAN-FD, and JTAG boundary scan in a 48-pin TQFP package running at up to 64 MHz from a 3 V to 3.6 V supply. From $4.50 in stock worldwide shipping.

PIC32MK0512MCJ064T-I/PT is a 32-bit MIPS-based microcontroller from Microchip with 512 KB Flash, 64 MHz clock, CAN-FD, motor control peripherals, and ADC/DAC in a 64-pin TQFP package for motion and industrial control.

The Microchip MCP16414-I/UN is a low-IQ current-mode PWM boost converter in a 10-pin MSOP package, supporting input voltages from 0.82 V to 5.25 V with programmable low-battery detection, power-good output, and automatic input-to-output bypass. Available with worldwide shipping.

The PIC32MK0512MCJ048T-E/Y8X is a 32-bit PIC32MK MCU from Microchip with 512 KB Flash, 64 MHz maximum clock, CAN-FD, integrated ADC and DAC, and JTAG boundary scan in a TQFP-48 package. It operates from a 3.0 V to 3.6 V supply and combines motor control features with real-time network connectivity. Suited for automotive-adjacent and industrial motor drive designs requiring CAN-FD communication.

The PIC18F06Q41T-I/SL is an 8-bit PIC18 microcontroller with 64 KB Flash, running at up to 64 MHz with integrated ADC, DAC, and DMA channels. It is designed for low-power embedded control and sensing applications in a compact 14-pin SOIC package. Available from stock with worldwide shipping.

Microchip ATA6563-GAQW1-VAO is a high-speed CAN FD transceiver supporting up to 5 Mbps data rates, operating from 4.5 V to 5.5 V supply, in an 8-pin SOIC package with Normal and Standby modes for automotive and industrial networks.

PIC32MK1024MCM100T-E/PT is a 32-bit PIC32 microcontroller from Microchip with 1 MB Flash, 64 MHz max clock, dual USB interfaces, CAN-FD, and motor control peripherals in a 100-pin TQFP package for industrial and automotive applications.

8-bit Microcontrollers - MCU Op Amp, 64KB Flash, 4K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

8-bit Microcontrollers - MCU 32KB Flash, 2K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

The PIC32MK1024MCM100T-I/PT is a 32-bit PIC32MK microcontroller with 1 MB Flash, operating at up to 64 MHz with integrated ADC, DAC, and boundary-scan support housed in a 100-pin TQFP package for advanced motor-control and industrial applications.

The ATA6563-GBQW1-VAO is an AEC-Q100 automotive-grade CAN bus transceiver IC in an 8-pin DFN package, compliant with ISO 11898-2 and featuring low standby current. It supports data rates up to 1 Mbps and is designed for reliable CAN communication in automotive body and powertrain applications.

Development Boards & Kits - PIC / DSPIC PIC / DSPIC PIC18F16Q41 Curiosity Nano Evaluation kit

8-bit Microcontrollers - MCU 32KB Flash, 2K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

8-bit Microcontrollers - MCU Op Amp, 32KB Flash, 2K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

SMD-54

Microchip MCP16418-I/UN is a low quiescent current boost converter in MSOP-10 package. It accepts input voltages from 0.82 V to 5.25 V and provides programmable low-battery detection and power-good output. Automatic input-to-output bypass protects load during high-input conditions.

MCP16411-I/UN is a low-quiescent-current PWM/PFM boost converter from Microchip with 0.82–5.25 V input, programmable low-battery detection, power-good output, and automatic bypass mode in a 10-pin MSOP for battery-powered IoT devices.

Microchip MCP1804T-C002I/DB is a fixed 12.0 V output LDO linear voltage regulator rated for 150 mA output current and up to 28 V input. It features a low dropout voltage of 0.65 V typical and comes in SOT-223-3 package. Suitable for automotive and industrial power supply designs requiring stable high-voltage regulation.

Microchip MCP9701AT-E/TO is a low-power linear active thermistor IC temperature sensor with ±4°C accuracy, 3.1V to 5.5V supply, and 0.015 mA operating current in a through-hole TO-92 package. Suitable for cost-sensitive temperature monitoring in consumer and industrial applications.

Microchip SST26VF016B-104V/SN70SVAO is a 16 Mbit SPI/Quad SPI NOR Flash memory operating at up to 104 MHz with 100,000 write/erase cycles and 100-year data retention, housed in an 8-pin SOIC package.

8-bit Microcontrollers - MCU 32KB Flash, 2KB RAM, 1KB EEPROM, 12b ADC2, 5b DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, SPI/I2C, IDLE/DOZE/PMD

The 25CSM04-I/MF is a 4 Mbit SPI EEPROM from Microchip in an 8-pin WSON (6 × 5 mm) package. It operates at up to 8 MHz SPI clock and provides 1,000,000 write/erase cycles with a minimum 100-year data retention rating. Designed for industrial and consumer embedded systems requiring high-density non-volatile serial memory.

32-bit Microcontrollers - MCU PIC32MK, 1MB Flash, Motor Control Version, 2x USB, CAN-FD, 100 pin TQFP

Microchip PIC32MK0512MCM064-I/PT is a 32-bit MIPS-based MCU with 512 KB Flash, 64-pin TQFP package, and 120 MHz maximum clock. It integrates motor control PWM, CAN-FD, and USB for industrial drive applications. Available with worldwide shipping and fast delivery.

The TC2185-3.3VCT is a 150 mA CMOS low-dropout regulator fixed at 3.3 V in a 5-pin SOT-23 package, featuring only 210 mV dropout voltage, shutdown control, and a -40°C to 125°C operating range for portable and space-constrained power supply designs.

• Arm Cortex-A7 Core – Arm TrustZone® – NEON multimedia architecture – Floating Point Unit – Embedded Trace module with instruction trace stream, including 16 Kbytes of CoreSight™ Embedded Trace buffer – 32 Kbytes of L1 data cache, 32 Kbytes of L1 instruction cache – 256 Kbytes of L2 cache – Up to 1 GHz operational frequency – Voltage and frequency scaling support – 64-bit generic timers • Internal Memory Architecture – 128 Kbytes of internal SRAM and 5 Kbytes of secure backup RAM – 80 Kbytes o

Motor / Motion / Ignition Controllers & Drivers w/Rstrt & Flt Dtct

8-bit Microcontrollers - MCU 7KB Flash, 512B RAM, 10b ADC, 2x PWM, 2x CCP, HLT, WDT, PPS, EUSART, SPI/I2C, XLP SLEEP Mode

8-bit Microcontrollers - MCU Op Amp, 16KB Flash, 1K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

IC GATE DRVR LOW-SIDE 8SOIC

8-bit Microcontrollers - MCU 7KB Flash, 512B RAM, 10b ADC, 2x PWM, 2x CCP, HLT, WDT, PPS, EUSART, SPI/I2C, XLP SLEEP Mode

The Microchip MAQ5300-2.8YML-T5VAO is a linear voltage regulator producing a fixed 2.8 V output at up to 300 mA in a compact 6-pin DFN package. It offers low dropout performance and low quiescent current for efficient operation in battery-powered and portable devices. Well-suited for RF front-end supplies, IoT sensors, and wireless module power rails.

The PIC16F15244T-I/SS is an 8-bit PIC16 microcontroller with up to 32 MHz clock, ADC capability, and 1.8 V minimum operating voltage at 16 MHz, housed in a 20-pin SSOP package. It is designed for low-power embedded control, sensor interfacing, and battery-operated applications requiring a compact, cost-effective MCU.

IC REG LINEAR 3.3V 300MA 6DFN

The PIC16F15244-I/P is an 8-bit PIC16 microcontroller from Microchip with 7 KB Flash running at up to 32 MHz in a through-hole 20-pin DIP package. It operates down to 1.8 V at 16 MHz, integrates ADC, PWM, SPI, and I2C for versatile low-cost embedded designs. Available from stock worldwide for hobbyist, industrial, and consumer electronics applications.

Microchip MAQ5300-3.0YML-TR is a fixed 3.0V LDO voltage regulator with 4V to 5.5V input range and only 100mV typical dropout voltage. It features exceptional 0.027% line regulation and 0.018% load regulation in a compact SOT-23-6 no-lead package. Ideal for portable and battery-powered embedded systems requiring stable, low-noise power rails.

The PIC16F15213-I/SN is an 8-bit PIC microcontroller from Microchip running up to 32 MHz in a compact SOIC-8 package. It integrates an ADC, operates down to 1.8 V at 16 MHz, and suits low-power embedded control applications. Available with a 3-week lead time for rapid prototyping and production.

LDO Voltage Regulators 6 VDFN 2x2x0.9mm T/R

The Microchip PIC16F15213-I/P is an 8-bit PIC16 microcontroller in an 8-pin PDIP package, running at up to 32 MHz with a 1.8 V minimum supply, integrated ADC, and multiple serial interfaces for compact embedded control designs. Available in stock with worldwide shipping.

The Microchip PIC18F06Q40T-I/SL is an 8-bit PIC18 microcontroller featuring 64 KB flash and a 14-pin SOIC package, running at up to 64 MHz with integrated ADC, DAC, and UART/SPI/I2C peripherals. Available in tape-and-reel packaging with worldwide shipping.

Microchip DSPIC33EP64GS504-I/PT is a 16-bit dsPIC33 digital signal controller with 64KB Flash running at up to 60 MHz on a 3.3V supply. It features a barrel shifter, boundary scan, high-speed ADC, and DSP engine in a 44-pin TQFP package. Targeted at power conversion, motor control, and digital power supply designs.

Microchip ATECC608B-TNGTLS is a secure element IC with hardware-accelerated cryptographic engines, pre-provisioned for Trust&GO TLS use cases, operating from -40°C to +85°C. It supports ECDH, ECDSA, AES-128, and SHA-256 in an 8-pin SOIC package, enabling IoT device authentication and secure key storage.

The PIC16F15244-E/P is an 8-bit PIC16 microcontroller featuring 7 KB Flash, 32 MHz max clock, and 1.8 V minimum operating voltage, housed in a 20-pin DIP package. It integrates an ADC and multiple peripherals suited for low-power embedded control in consumer and industrial applications. Available from stock with worldwide shipping.

The PIC18F57Q84T-I/PT is an 8-bit PIC18 RISC microcontroller in a 48-pin TQFP package, running up to 64 MHz with 128 KB Flash, DMA, CAN FD, 12-bit ADC, and multi-voltage 2.5 V to 5 V operation for automotive and industrial embedded control.