MCP3461RT-E/NC Microchip Integrated Circuit (Quad Flat No-Lead) In Stock

Microchip MCP3461RT-E/NC is a 16-bit delta-sigma ADC with on-chip voltage reference and internal oscillator, housed in a compact UQFN-20 package. It supports 2 differential analog input channels with ±3.6 V range and delivers up to 153.6 kSPS throughput via an SPI interface. Designed for space-constrained industrial sensors, wearable instruments, and IoT data-acquisition nodes operating from a 3.3 V supply.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP3461RT-E/NCQuad Flat No-Lead
Quick Facts
Manufacturer
Microchip
Package
Quad Flat No-Lead
Pin Count
20
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.6700(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 16-bit delta-sigma ADC with integrated 2.4 V voltage reference, eliminating external reference components
  • Compact UQFN-20 package enables high-density PCB placement for space-constrained IoT designs
  • 2 differential analog input channels with ±3.6 V input range and programmable gain from 1/3 to 64
  • On-chip oscillator and SPI interface operating up to 25 MHz for easy microcontroller integration
  • Low noise performance: 22.4 µVRMS enabling accurate millivolt-level sensor signal acquisition

Applications

The MCP3461RT-E/NC suits miniaturized IoT sensing nodes and wearable devices where board space is critical, thanks to its tiny UQFN-20 footprint combined with 16-bit resolution. Industrial process control applications including temperature measurement with thermocouples, RTD interfaces, and pressure sensor digitization benefit from its integrated voltage reference and programmable gain amplifier operating across the -40°C to 125°C range. Its low-power SPI-based architecture also makes it a strong fit for battery-operated portable diagnostic equipment.

Specifications

Manufacturer Package CodeUQFN-20
Factory Lead Time8Weeks
YTEOL19
Analog Input Voltage-Max3.6V
Analog Input Voltage-Min-3.6 V
Converter TypeADC, DELTA-SIGMA
JESD-30 CodeS-PQCC-N20
JESD-609 Codee3
Linearity Error-Max (EL)0.0032%
Number of Analog In Channels2
Number of Bits16
Number of Functions1
Output Bit Code2'S COMPLEMENT BINARY
Output FormatSERIAL
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeLCC20,.12SQ,16
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Sample Rate0.1536MHz
Sample and Hold / Track and HoldSAMPLE
Supply Current-Max2.5mA
Supply Voltage-Nom3.3V
Surface MountYES
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.4mm
Terminal PositionQUAD
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginTaiwan

Datasheet

MCP3461RT-E/NC Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the UQFN-20 package of MCP3461RT-E/NC compare to the TSSOP-20 version for high-density PCB designs?

The UQFN-20 package measures approximately 3 mm × 3 mm, offering a significantly smaller footprint than the TSSOP-20 used on the MCP3461R-E/ST. This allows engineers designing compact IoT modules or wearable sensor nodes to achieve the same 16-bit, 153.6 kSPS delta-sigma performance in roughly one-quarter the PCB area, with thermal performance improved by the exposed pad.

What programmable gain settings does MCP3461RT-E/NC support for direct sensor connection?

The integrated PGA supports gain values of 1/3, 1, 2, 4, 8, 16, 32, and 64, covering input signal ranges from small millivolt bridge outputs up to ±3.6 V full-scale. This flexibility allows direct connection to 4–20 mA current-loop transducers, strain gauges, and thermocouples in 3.3 V industrial systems without external gain-setting resistors or op-amps.

What operating temperature range does MCP3461RT-E/NC support for industrial deployments?

The MCP3461RT-E/NC is rated for -40°C to 125°C ambient temperature operation, meeting industrial-grade requirements for factory automation, outdoor environmental monitoring, and automotive auxiliary systems. Combined with the internal oscillator and voltage reference, it can deliver consistent 16-bit accuracy across the full temperature range without external calibration components.

In what scenario would MCP3461RT-E/NC be preferred over an external-reference ADC such as MCP3461-E/NC?

When BOM cost reduction and PCB area minimization are primary design constraints in a 3.3 V single-supply system, the MCP3461RT-E/NC is preferred because its integrated 2.4 V reference and internal oscillator remove two external components. For applications achieving less than 1 LSB INL error at 16-bit resolution while keeping the solution footprint under 10 mm², this variant offers the best integration level in the MCP346x family.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.6700
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$2.3800$2.38
100+$1.8000$180.00
1000+$1.7400$1740.00
3000+$1.6700$5010.00
pcs
Unit price: $2.3800 · Total: $2.38

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea