MCP6294-E/ST Microchip Integrated Circuit (Small Outline Packages) In Stock

Microchip MCP6294-E/ST is a quad-channel 10 MHz gain-bandwidth op-amp with rail-to-rail output, 80 dB CMRR, and 5 nA bias current in a TSSOP-14 package. It operates from 1.8 V to 6 V for multi-channel active filter and signal-chain designs. Available with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP6294-E/STSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
14
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.4200(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Quad op-amp with 10 MHz gain-bandwidth product and rail-to-rail output swing, enabling four independent active filter or amplifier stages in a single TSSOP-14 package
  • Ultra-low 5 nA maximum input bias current and 80 dB CMRR for precision multi-channel sensor signal conditioning from 1.8 V to 6 V supplies
  • 1-week factory lead time availability in compact TSSOP-14 footprint, reducing BOM risk for high-volume portable instrumentation and audio designs

Applications

The MCP6294-E/ST is designed for multi-channel active filter banks, quad-channel ADC driver circuits, and portable instrumentation front-ends where four amplifier stages must fit within minimal PCB area. Its 10 MHz bandwidth supports audio-band and sensor-conditioning filters with corner frequencies up to several hundred kilohertz. The 1.8 V minimum supply enables direct operation from single-cell Li-ion batteries in wearable and handheld measurement devices.

Specifications

Pbfree CodeYes
Manufacturer Package CodeTSSOP-14
Factory Lead Time1Week
YTEOL8
Amplifier TypeOPERATIONAL AMPLIFIER
ArchitectureVOLTAGE-FEEDBACK
Average Bias Current-Max (IIB)0.005 µA
Common-mode Reject Ratio-Min65dB
Common-mode Reject Ratio-Nom80dB
Frequency CompensationYES
Input Offset Voltage-Max5000 µV
JESD-30 CodeR-PDSO-G14
JESD-609 Codee3
Low-BiasYES
Low-OffsetNO
MicropowerNO
Number of Functions4
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP14,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Packing MethodTUBE
Peak Reflow Temperature (Cel)260
PowerNO
Programmable PowerNO
Qualification StatusNot Qualified
Slew Rate-Nom7V/us
Supply Current-Max5.2mA
Supply Voltage Limit-Max7V
Supply Voltage-Nom (Vsup)5V
Surface MountYES
TechnologyCMOS
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
Unity Gain BW-Nom10000
Voltage Gain-Min31620
WidebandNO
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.33.00.01
Country of OriginMalaysia, Philippines, Thailand

Datasheet

MCP6294-E/ST Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for MCP6294-E/ST:

MCP6294IPWTTexas Instruments Operational

Amplifier, 4 Func, 3000uV Offset-Max, CMOS, PDSO14

View Part →

Frequently Asked Questions

What gain-bandwidth product does the MCP6294-E/ST provide and at what closed-loop gain does it achieve 1 MHz signal bandwidth?

The MCP6294-E/ST has a 10 MHz gain-bandwidth product, meaning at a closed-loop gain of 10 V/V the -3 dB bandwidth is approximately 1 MHz. This makes it suitable for audio anti-aliasing filters, sensor signal conditioning up to 500 kHz, and ADC driver stages requiring flat response across the full audio band.

How does integrating four op-amps in the MCP6294-E/ST reduce PCB area compared to using discrete single-channel parts?

The TSSOP-14 package of the MCP6294-E/ST measures approximately 5 mm × 4.4 mm and houses 4 amplifiers, compared to four individual SOT-23-5 packages occupying roughly 4 × 4.6 mm² each. Using the quad device reduces footprint by about 70% and cuts the number of passive decoupling capacitors needed from four to two shared supply pins.

For a 4-channel ECG front-end, why is the 5 nA input bias current of the MCP6294-E/ST important?

ECG electrodes present source impedances of 10 kΩ to 100 kΩ. A 5 nA bias current through 100 kΩ generates only 0.5 µV of offset error, well below the 10 µV baseline noise floor of typical ECG measurements. This ensures that the MCP6294-E/ST does not add clinically significant bias to biopotential signals across all 4 channels simultaneously.

Which supply configurations support the MCP6294-E/ST in mixed 3.3 V and 5 V system designs?

The MCP6294-E/ST operates from 1.8 V to 6 V single supply, making it directly compatible with 3.3 V system rails, 5 V legacy analog rails, and split ±2.5 V supplies. The rail-to-rail output ensures the full supply swing is available to downstream ADCs, simplifying level shifting in mixed-voltage signal chains where analog headroom is limited.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.4200
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.4200$0.42
pcs
Unit price: $0.4200 · Total: $0.42

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea