MCP622-E/SN Microchip Integrated Circuit (Small Outline Packages) In Stock
MCP622-E/SN is a dual 20 MHz auto-zero operational amplifier from Microchip with 0.005 µA maximum bias current and 84 dB typical CMRR, designed for extended temperature operation. Voltage-feedback architecture in an 8-pin SOIC package suits precision signal conditioning. Available from stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP622-E/SN Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.4600(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP622-E/SN?
- Auto-zero (auto-calibration) architecture eliminates offset voltage drift, achieving near-zero DC error over temperature
- 20 MHz gain-bandwidth product enables wide-bandwidth signal processing in audio and sensor conditioning stages
- Ultra-low 0.005 µA maximum bias current with 84 dB typical CMRR supports high-impedance sensor interfaces
What is MCP622-E/SN used for?
The MCP622-E/SN is designed for precision signal conditioning applications requiring low offset and drift, such as thermocouple amplifiers, bridge sensor amplifiers, and medical instrumentation front-ends. Its auto-zero architecture continuously corrects offset errors, making it ideal for high-accuracy, low-frequency measurements where DC precision is critical. The dual-amplifier configuration in a compact SOIC-8 package allows two independent signal channels to share a single IC in a differential or cascaded amplifier topology.
What are the specifications of MCP622-E/SN?
| Pbfree Code | Yes |
| Manufacturer Package Code | SOIC-8 |
| Factory Lead Time | 6Weeks |
| YTEOL | 8 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.005 µA |
| Common-mode Reject Ratio-Min | 68dB |
| Common-mode Reject Ratio-Nom | 84dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 200 µV |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | YES |
| Micropower | NO |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Slew Rate-Nom | 10V/us |
| Supply Current-Max | 7.2mA |
| Supply Voltage Limit-Max | 6.5V |
| Supply Voltage-Nom (Vsup) | 2.5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 20000 |
| Voltage Gain-Min | 25100 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Mainland China, Thailand |
Where can I find the MCP622-E/SN datasheet?
MCP622-E/SN Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP622-E/SN?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the auto-zero feature of MCP622-E/SN reduce measurement error in precision sensor designs?
The MCP622-E/SN uses an internal auto-zero (chopper-stabilized) technique that continuously samples and cancels the input offset voltage. This reduces effective input offset to near 0 µV and eliminates 1/f (flicker) noise, allowing DC-accurate measurements from sensors such as thermocouples or strain gauges with errors below 1 µV, which is essential in high-resolution 16-bit or 24-bit ADC signal chains.
What signal bandwidth does the MCP622-E/SN provide, and how does it fit into audio or data acquisition designs?
The MCP622-E/SN has a 20 MHz gain-bandwidth product in its voltage-feedback architecture. At a closed-loop gain of 10, this yields a small-signal bandwidth of 2 MHz, sufficient for audio processing up to 20 kHz with large gain margin and for industrial sensor conditioning at sampling rates up to 500 ksps. The frequency compensation feature ensures stability across a wide range of capacitive loads and feedback configurations.
What is the common-mode rejection ratio of the MCP622-E/SN and why does it matter for differential sensor measurements?
The MCP622-E/SN achieves a typical CMRR of 84 dB and a minimum of 68 dB. In a differential measurement setup such as a Wheatstone bridge or a 4-wire RTD, a CMRR of 84 dB means common-mode noise at the input is attenuated by a factor of approximately 16,000, so a 1 V 50 Hz interference signal would contribute less than 63 µV of error at the output, preserving measurement accuracy in electrically noisy industrial environments.
When should MCP622-E/SN be chosen over a standard op-amp in a low-side current sensing circuit?
MCP622-E/SN is preferred over standard op-amps in low-side current sensing when the measured voltage across the sense resistor is in the 1 mV to 10 mV range, because its auto-zero architecture keeps input offset below 5 µV across the extended temperature range (E grade, typically -40°C to +125°C). A standard op-amp with a 1 mV offset would introduce a 10% to 100% measurement error at these small signals, whereas the MCP622 maintains sub-1% accuracy without external trimming.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.4600 | $0.46 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit