MCP7940NT-I/MNY Microchip Real-Time Clock (TDFN-8) In Stock
MCP7940NT-I/MNY is a low-power real-time clock (RTC) IC from Microchip with I2C serial interface, 64 bytes of battery-backed SRAM, and operating supply of 1.8 V to 5.5 V for accurate timekeeping in embedded systems.
- Manufacturer
- Microchip
- Package
- TDFN-8
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP7940NT-I/MNY Datasheet PDF
- Category
- Real-Time Clock
- Price
- From $0.7700(MOQ 25)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP7940NT-I/MNY?
- I2C serial interface operating up to 400 kHz for easy microcontroller integration
- 64 bytes of battery-backed SRAM for non-volatile data retention
- Operating supply voltage range of 1.8 V to 5.5 V
- On-chip crystal oscillator requires no external tuning capacitors
- Configurable alarm outputs with interrupt capability
- Low timekeeping current of typically 1.2 µA at 3.3 V
- TDFN-8 package for space-constrained board designs
What is MCP7940NT-I/MNY used for?
The MCP7940NT-I/MNY is commonly used in portable consumer electronics, industrial monitoring equipment, and smart metering systems where accurate timekeeping with minimal power consumption is essential. It is well suited for data loggers, HVAC controllers, and IoT edge nodes that require time-stamped events stored in battery-backed SRAM. Its wide supply voltage range makes it compatible with both 3.3 V and 5 V microcontroller platforms.
What are the specifications of MCP7940NT-I/MNY?
| Manufacturer Package Code | TDFN-8 |
| Factory Lead Time | 6Weeks |
| YTEOL | 13 |
| Clock Frequency-Max | 0.032MHz |
| Information Access Method | SERIAL(I2C) |
| Interrupt Capability | Y |
| JESD-30 Code | R-PDSO-N8 |
| JESD-609 Code | e4 |
| On Chip Data RAM Width | 8 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC8,.11,20 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| RAM (words) | 64 |
| Screening Level | AEC-Q100 |
| Supply Current-Max | 0.4mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 1.8V |
| Supply Voltage-Nom | 2.5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time-Min | SECONDS |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Volatile | YES |
| uPs/uCs/Peripheral ICs Type | TIMER, REAL TIME CLOCK |
| Package | TDFN-8 |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Where can I find the MCP7940NT-I/MNY datasheet?
MCP7940NT-I/MNY Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP7940NT-I/MNY?
Compatible alternatives and drop-in replacements for MCP7940NT-I/MNY:
Frequently Asked Questions
How does the MCP7940NT-I/MNY maintain time accuracy when the main power supply is removed?
The MCP7940NT-I/MNY includes 64 bytes of battery-backed SRAM and a dedicated VBAT pin that keeps the oscillator and registers powered from a coin cell down to 1.3 V, preserving timekeeping accuracy across power outages.
What I2C clock speeds does the MCP7940NT-I/MNY support for firmware integration?
The device supports Standard mode at 100 kHz and Fast mode at 400 kHz on the I2C bus, making it compatible with most 8-bit and 32-bit microcontrollers without requiring additional bus buffers or clock stretching.
Which supply voltage rail options are compatible with the MCP7940NT-I/MNY for mixed-voltage systems?
The MCP7940NT-I/MNY operates across a 1.8 V to 5.5 V supply range, allowing direct connection to both 3.3 V ARM-based MCUs and 5 V AVR platforms in a single design without level-shifting the power rail.
What is the lead time and package format buyers should expect for MCP7940NT-I/MNY procurement?
Typical factory lead time is 6 weeks. The part ships in a compact TDFN-8 package with an 8-pin no-lead footprint, suitable for automated SMT reflow assembly with fine-pitch pick-and-place equipment.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 25+ | $0.9610 | $24.02 |
| 50+ | $0.9340 | $46.70 |
| 100+ | $0.8300 | $83.00 |
| 1000+ | $0.7900 | $790.00 |
| 5000+ | $0.7700 | $3850.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”