Analog Devices

Clock Generators & Support Products Hi Perf Clk Gen 2500MHz Fmax. 3.3V Only

OP Amp Quad Current Fdbk ±12V/24V 14-Pin PDIP N

RF Switch ICs High Pwr ,20W Peak SPDT,Reflective Swich

Analog Devices ADG736 is a dual SPDT (single-pole double-throw) analog switch designed for low-voltage operation, offering low on-resistance and wide signal bandwidth in a compact small-outline package. It enables signal routing in battery-powered and mixed-signal systems. Available in stock with worldwide shipping.

Active Filters Active RC, 4th Order Lpass Filt Fam

The LTC6253IMS#PBF is a high-speed 800MHz rail-to-rail input/output op-amp from Analog Devices with only 3.5mA supply current. It offers 105dB typical CMRR and 2.5µA maximum bias current in an 8-pin MSOP package. Suitable for power-efficient wideband signal processing and active filter designs.

Analog Devices LTC6253IMS-7#PBF is a 3 GHz gain-bandwidth, 3.5 mA supply current voltage-feedback op-amp with rail-to-rail I/O, 105 dB CMRR, and 130 MHz -3 dB bandwidth in an MSOP-8 package for high-speed signal processing.

Analog Devices LTC2057 is a single automotive-grade zero-drift chopper-stabilized op-amp operating on up to 36 V supply with rail-to-rail output. It achieves 150 dB CMRR and 0.2 nA input bias current, making it ideal for precision current sensing and signal conditioning in an 8-pin MSOP package.

LTC2952CUF#PBF is a pushbutton power path controller with system monitoring from Analog Devices in a 16-pin QFN package. It manages clean power-on and power-off sequencing via a single pushbutton, with adjustable hold-off timers, watchdog monitoring, and interrupt outputs for microcontroller supervision. Ideal for handheld devices, industrial instruments, and embedded systems requiring reliable soft power control.

The ADP1708ACPZ-R7 from Analog Devices is a fixed positive single-output CMOS LDO linear voltage regulator rated for 1A output current, housed in an 8-lead small outline no-lead (LFCSP) package with a 260C peak reflow rating. In stock, ships worldwide.

High Speed Operational Amplifiers 800MHz, 3.5mA Power Efficient Rail-to-Rail I/O Op Amps

The LTC6268IS8-10#TRPBF is a 4 GHz ultralow bias current FET-input operational amplifier from Analog Devices in an 8-pin SOIC package. It delivers an exceptionally low bias current of just 2 fA at 25°C and 77 dB typical CMRR, ideal for trans-impedance amplifier and photodetector applications. Available on tape-and-reel in lead-free packaging for high-volume precision instrumentation designs.

LDO Voltage Regulators 3.3/5Vin 2A Ultra Low Noise LDO ADJ

Use the download button to access the HMC253QS24ETR schematic symbol, PCB footprint, and 3D model.

0.300 INCH, PLASTIC, SO-20

The ADP1712AUJZ-3.3-R7 is a fixed 3.3V CMOS low-dropout linear regulator from Analog Devices delivering up to 300mA output current with a low 0.17V typical dropout voltage across a 2.5V to 5.5V input range in a 5-pin SOT23 package.

Analog Comparators Rail to rail,sing chan, TTL/CMOS Compara

Digital to Analog Converters - DAC 8-bit Vout DAC SC70 (2.5V ref, reset to zero scale) Single 12-/10-/8-Bit Rail-to- Rail DACs with 10ppm/°C Reference in SC70

The LTC1563-2CGN#PBF is a 4th-order active low-pass filter IC with a cutoff frequency range of 0.256 kHz to 256 kHz. It integrates resistors and capacitors in a 16-pin SSOP package for easy implementation. Available from authorized distributors with worldwide shipping.

Precision Amplifiers Dual Zero-Drift Op Amp

Analog Devices LTC7862EFE#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 20 pins, 140 V, -40°C to 125°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LT3579IUFD-1 is a multi-topology current-mode PWM switching regulator with 6 A output and 2.5 V to 16 V input range, housed in a compact 20-pin QFN package for flexible DC/DC power conversion in portable and industrial systems.

Analog Devices ADCMP600BKSZ-REEL7 is a single-channel, rail-to-rail high-speed voltage comparator with TTL/CMOS-compatible output, a 5 µA maximum bias current, and 5 mV maximum input offset voltage, packaged in a compact 5-pin SOT-23 for space-constrained signal detection circuits.

LTC1550LCS8-2#PBF is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 8 pins, Small Outline Packages, and datasheet-backed parameters. Available through FindMyChip sourcing with worldwide shipping support.

The LT3462AEDC#TRPBF is a 300 mA inverting DC/DC converter operating at 2.7 MHz with 2.5 V to 16 V input, using current-mode PWM control in an 8-pin DFN package to generate negative supply rails for analog and mixed-signal circuits.

LT1723CMS8#PBF is a dual 200 MHz voltage-feedback operational amplifier from Analog Devices offering low noise and precision performance with 75 dB CMRR and 850 µV maximum input offset voltage. It suits high-speed signal conditioning, active filters, and precision instrumentation designs in an MSOP-8 package.

ADN4691EBRZ is a half-duplex M-LVDS/LVDS line transceiver from Analog Devices supporting up to 200 Mbps data rates with a Type 1 receiver and enhanced ESD protection. It features differential Schmitt-trigger inputs in a compact 8-pin small-outline package compliant with EIA-899/TIA-899 and EIA-644/TIA-644 standards. This part is in stock and ships worldwide for industrial networking designs.

RS-232 Interface IC +5V RS232/RS485 Transceiver

Single Channel, 128-Position, I2C, ±8% Resistor Tolerance, Nonvolatile Digital Potentiometer

Analog Devices LTC6992IS6-1#TRMPBF is a voltage-controlled PWM oscillator with 0% to 100% duty cycle control via a 0.1 V to 0.9 V analog input. Operating from DC to 1 MHz frequency range, it is ideal for analog PWM signal generation, LED dimming, and motor control in a 6-pin SOT-23 package.

Analog Devices LTC6908CS6-2#TRPBF is a dual-phase spread-spectrum oscillator with programmable frequency from 10 kHz to 10 MHz in a 6-pin SOT-23 package. It reduces EMI in switching regulators and clocking circuits with integrated spread-spectrum frequency modulation (SSFM). Available from stock in tape-and-reel with worldwide shipping.

General Purpose Audio Codec 2ADC / 2DAC Ch Automotive 32-Pin LFCSP EP T/R

36 V, 18 MHz, Low Noise, Fast Settling Single Supply, RRO, JFET Op Amp

Analog Devices AD607ARS, Up-Down Converter & Mixer Circuit 20-Pin SSOP

LTC2392CLX-16#PBF is a 16-bit successive-approximation ADC from Analog Devices offering 500 ksps throughput with serial and parallel interface options and a maximum conversion time of 1.3 µs. It accepts differential analog inputs from -2.5 V to 4.75 V in a 48-pin LQFP package. Available from stock with worldwide shipping.

Analog Devices LT6658AHMSE-5#PBF is a low-noise, high-current, dual-output precision voltage reference providing a tight 5 V output with ±2.5 mV accuracy, capable of sourcing and sinking high load currents in a 16-pin SOIC package.

Analog Devices LT1375CN8-5 is a 500 mA fixed 5 V output current-mode PWM step-down switching regulator accepting 5 V to 25 V input in an 8-pin PDIP package. Delivers high efficiency DC-DC conversion for embedded power supplies.

Digital to Analog Converters - DAC CMOS 12B SERIAL IC

The LTC4368HDD-1#PBF is an automotive-grade under/overvoltage supervisor and protection IC from Analog Devices in a 10-pin DFN package. It features adjustable threshold levels to protect downstream circuits from supply transients and fault conditions. Designed for 1-channel protection in automotive and industrial environments.

LTC4301LCDD#PBF is an Analog Devices supply-independent I2C bus buffer in an 8-pin DFN package that isolates capacitive loads and enables hot-swappable bus segments. It supports bidirectional SDA and SCL buffering across different supply voltage domains without requiring matched supply rails. Available in stock with worldwide shipping.

Low quiescent current boost, SEPIC, and inverting DC-DC converter with a 4 A, 60 V internal switch. Accepts 2.8 V to 60 V input with current-mode control and pulse-skip for high efficiency at light loads. Suited for industrial, automotive, and wide-input portable power supplies.

RF Mixer 2GHz to 14GHz Microwave Mixer with low IF Frequency

RS-232 Interface IC RS232/RS485 Multiprotocol Transceiver with Integrated Termination (Shared I/O)

LDO Voltage Regulators 20V 200mA LDO 1.8Vo

MCU 16-bit/32-bit ARM7TDMI RISC 32KB Flash 9V/12V/15V Automotive 48-Pin LFCSP EP Tray

Analog Devices LTC6992IS6-3#TRMPBF is a silicon oscillator-based PWM generator in a 6-pin SOT-23 package, offering 0% to 95% pulse width control via a 0.1–0.9 V control voltage. Operating frequency is programmable from 3.18 Hz to 1 MHz using a single external resistor. Available in tape and reel from authorized distributors with worldwide shipping.

Switching Voltage Regulators 6V/6A High Eff Step-Dwn DC-to-DC Rg

Analog Devices LT6658BIMSE-3.3#PBF is a precision 3.3 V voltage reference with dual outputs, ultra-low noise, and high output current capability in a 16-pin SOIC package, offering tight 0.2% initial accuracy for demanding analog systems.

LT1012AIN8#PBF is a single precision general-purpose op-amp with 180 µV max offset voltage, 128 dB typical CMRR, and ±20V supply range. It features 0.8 nA max bias current in a through-hole 8-pin PDIP package. Available from stock with worldwide shipping.

LDO Voltage Regulators Low Iq LDO with Passthrough option