Analog Devices

Analog Devices ADUM5000WARWZ-RL is an isolated DC/DC converter in a 16-lead SOIC-wide package, providing regulated power across an isolation barrier from a 3 V to 3.6 V input. Delivers 35% efficiency for powering isolated logic and interface circuits. Available in stock with worldwide shipping.

The Analog Devices AD630BD is a precision 2 MHz balanced modulator/demodulator IC in a 20-pin ceramic DIP package, designed for synchronous detection and lock-in amplifier applications. It delivers high carrier suppression and operates from ±15 V supplies for demanding analog signal processing. Available worldwide for instrumentation, communications, and scientific measurement system designs.

The LTC1662IMS8#TRPBF is a dual 10-bit DAC in an 8-pin MSOP package with ultra-low power consumption, operating from a single 2.7 V to 5.5 V supply, ideal for portable and battery-powered applications.

LT3062IMS8E-5#PBF is a 45 V input, 200 mA fixed 5 V output micropower LDO linear regulator with low noise and output discharge in an MSOP-8 package. Available from stock worldwide with fast shipping and competitive pricing.

Analog Devices LTC2865IMSE#PBF is a full-duplex RS-422/RS-485 transceiver with selectable 20 Mbps or 250 kbps data rates and ±60 V fault protection. It integrates a separate logic supply pin and differential Schmitt-trigger inputs in a 12-pin MSOP package. From $5.20 in stock with worldwide shipping.

Analog Devices LT4320HDD#PBF is an ideal diode bridge controller IC that drives 4 external N-channel MOSFETs to form a low-loss full-wave bridge rectifier. Offered in an 8-pin SOIC package with heat sink slug, it supports input voltages from 9 V to 72 V for AC-DC and energy harvesting applications. Available in stock worldwide with competitive pricing.

Operational Amplifiers - Op Amps High Speed Buffer

The LT1672IMS8#PBF is a precision rail-to-rail input/output operational amplifier from Analog Devices with 2 µA supply current, 96 dB minimum CMRR, voltage-feedback architecture, and minimum gain of 5, packaged in an 8-pin MSOP for low-power precision signal conditioning.

Op Amp Dual GP R-R I/O ±8V/16V Automotive 8-Pin MSOP Tube

Analog Devices AD713JN, Op Amp, 4MHz, 14-Pin PDIP

Digital Isolator CMOS 4-CH 150Mbps 16-Pin SOIC W Tube

20 V, 500 mA, Low Noise, CMOS LDO

The LT3652IMSE#TRPBF is an Analog Devices 2 A step-down battery charger IC optimized for solar-panel and wide-input-range power sources, supporting Li-Ion, Li-Polymer, and SLA chemistries. It features input voltage regulation for maximum power point tracking and programmable charge current up to 2 A. Housed in a 12-lead MSOP package for compact solar energy-harvesting and portable power applications.

LT3062EMS8E-3.3 is a micropower 200 mA LDO voltage regulator from Analog Devices with a wide 3.9 V to 45 V input range and ultra-low noise output. It features an integrated output discharge function and 300 mV typical dropout voltage at a fixed 3.3 V output. Available in an 8-pin MSOP package with worldwide shipping.

AD7768-1BCPZ is a precision 24-bit delta-sigma ADC from Analog Devices supporting DC to 204 kHz dynamic signal analysis with power scaling, housed in a 28-pin QFN package. It features 0.0007% maximum linearity error, 2 V to 5.5 V analog input range, and flexible power modes. Available in stock with worldwide shipping.

Analog Devices LT6004CMS8#TRPBF is a dual precision rail-to-rail input and output op-amp operating from a 1.6 V supply with 825 µV maximum input offset voltage and 100 dB typical CMRR. It is housed in an 8-pin MSOP package suitable for low-voltage, low-power sensor signal conditioning. Available from authorized distributors with worldwide shipping.

LT6700HVHS6-2 is a micropower dual comparator with an integrated 400 mV precision reference from Analog Devices, featuring open-collector outputs and just 0.01 µA input bias current at 25°C. It operates from 1.4 V to 18 V and is housed in a tiny SOT-23 6-pin package, suited for battery-powered window comparators, threshold detectors, and level monitors.

ANALOG DEVICES - ADG841YKSZ-REEL7 - ANALOGUE SW, SINGLE, SPST, SC70-6

Linear Voltage Regulators volt Regulator, Quad, hi Current QUAD LOW NOISE HIGH PSRR LINEAR VOLTAGE REGULATOR

LTC6405IMS8E#TRPBF is a 2.7 GHz unity-gain bandwidth, low-noise, rail-to-rail input differential amplifier and ADC driver operating from a 5 V supply with 750 MHz -3 dB bandwidth. It delivers 75 dB typical CMRR and is packaged in a compact MS8E footprint for high-speed signal chain applications.

Operational Amplifiers - Op Amps Dual uP R-to-R I/O OA

LTC2954CTS8-1#TRMPBF is a push-button on/off controller with interrupt output from Analog Devices, designed to manage system power sequencing and menu-driven user interfaces in a compact 8-pin SOT-23 package. It features adjustable thresholds, supports supply voltages from 1.6 V to 26 V, and operates over -40°C to 85°C. Available from stock worldwide shipping.

The LTC2050HVCS6#TRMPBF is a zero-drift, rail-to-rail output operational amplifier in a compact SOT-23-6 package. It offers 130 dB CMRR and near-zero offset voltage drift using chopper stabilization. Available from stock worldwide with fast shipping.

The LTC2050HVIS8#PBF is a zero-drift, chopper-stabilized operational amplifier from Analog Devices in an 8-pin SOIC package. It delivers 115 dB CMRR, rail-to-rail output, and 3 MHz bandwidth from a 2.7V supply. Available from stock worldwide with fast shipping.

Analog Devices LTC6101HVCIS5#TRMPBF is a high-voltage current sense amplifier in a 5-pin SOT-23 package capable of operating with input voltages up to 60 V. It delivers a maximum input offset voltage of 1200 µV and supports accurate high-side current measurement. Available from stock with worldwide shipping.

The LT1461DHS8-2.5#PBF is a precision low-dropout 2.5 V micropower voltage reference in an SO-8 package. It provides a highly accurate output from 2.49625 V to 2.50375 V with a single output function. Designed for portable instruments, ADC references, and precision analog circuits requiring stable 2.5 V rails.

The LTC2944CDD#PBF is a battery gas gauge IC from Analog Devices supporting up to 60 V battery stacks with integrated voltage, current, and temperature measurement. It provides adjustable threshold alerts via an I2C-compatible interface in a compact 8-pin DFN package. Ideal for battery management systems in industrial equipment, portable instruments, and electric vehicle auxiliary packs.

Analog Devices LTC4367CMS8-1#PBF is a 100 V overvoltage, undervoltage, and reverse supply protection controller in an 8-pin MSOP package. It monitors supply rails and drives an external N-channel MOSFET to disconnect the load within 0.5 ms on fault detection. RoHS-compliant and available from stock with worldwide shipping.

Controller 2.7V to 26.4V Automotive 8-Pin DFN EP T/R

The LT4320HN8-1#PBF is an ideal diode bridge controller IC from Analog Devices supporting 9 V to 72 V input range. It drives four external N-channel MOSFETs to form a near-lossless full-wave bridge rectifier, replacing lossy Schottky diode bridges. Packaged in an 8-pin DIP.

The LT1720CMS8#PBF is a dual ultra-fast rail-to-rail output comparator from Analog Devices with 2.5 ns propagation delay and 2.7 V to 6 V supply range in an 8-pin MSOP package. It features push-pull outputs compatible with TTL and CMOS logic levels for high-speed signal detection. Available from authorized distributors with worldwide shipping.

Analog Devices LT1800CS8#PBF is an 80 MHz rail-to-rail input/output precision operational amplifier in an 8-pin SOIC package, featuring 1.75 µA maximum bias current and 82 dB minimum CMRR. Ideal for precision signal conditioning and active filter designs. Available from distributor stock with worldwide shipping.

Analog Devices LTC6262IMS8#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 8 pins, 2.625 V, 5.25 V in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Linear Voltage Regulators 150mA LDO 2.7Vout w/ QOD

LDO Voltage Regulators 3.3/5Vin 1.2A Ultra Low Noise LDO Fixed

Analog Devices LTC6244HVHDD#PBF is a dual precision 50 MHz CMOS operational amplifier with 80 dB minimum CMRR and 2 pA maximum input bias current. Housed in a small-outline no-lead (DFN) package, it delivers low-noise, high-speed performance for precision signal-conditioning circuits.

Analog Devices LTC1662CMS8#TRPBF is an ultra-low power dual 10-bit DAC with serial input in an 8-pin MSOP package, supporting up to 5.5 V supply, offering 0.39% linearity error for precision analog output.

Linear Voltage Regulators Ultra Low Quiescent Crnt 150mA CMOS

LTC4367IMS8-1#PBF is a 100 V overvoltage, undervoltage, and reverse supply protection controller with adjustable thresholds and 0.5 ms turn-on delay in an SOIC-8 package. It guards sensitive downstream electronics against input supply faults across a wide voltage range. Available from Analog Devices with worldwide distribution and in-stock supply.

The Analog Devices LTC2917HMS-A1#PBF is a single-channel voltage supervisor IC with 27 selectable threshold presets and an integrated watchdog timer in a 10-pin MSOP package. It monitors one supply rail and asserts a reset signal when voltage falls below the selected threshold, ensuring reliable system startup and fault recovery. Available in stock with worldwide shipping.

Analog Devices LT1720IMS8#PBF is a dual high-speed comparator operating from 3 V or 5 V single supply with 4.5 ns propagation delay and push-pull outputs. Features 4.5 mV maximum input offset voltage in a compact MSOP-8 package. In stock worldwide with fast shipping.

RS-232 Interface IC 1.8V-5V 1D+1R 250kbps RS232 Transceiver

Multiplexer Switch ICs SPI Low chrg injctm leakage Diff

LTC4367HMS8#PBF is a 100V overvoltage, undervoltage, and reverse supply protection controller IC from Analog Devices in an 8-pin MSOP package, featuring adjustable thresholds and a 32 ms turn-on delay. It controls an external N-channel MOSFET to disconnect the load during fault conditions, protecting sensitive downstream electronics. Available from authorized distributors worldwide.

32-Channel 20mA LED Driver with Buck Controller UHH PACKAGE 56-LEAD (5mm × 9mm) PLASTIC QFN

The LTC6262HMS8#TRPBF is a dual 30 MHz rail-to-rail input/output operational amplifier from Analog Devices, consuming only 240 µA quiescent current per amplifier. It features 70 dB minimum CMRR and 0.15 µA maximum bias current, making it ideal for precision, power-efficient analog front ends. Available in an 8-lead MSOP package with tape-and-reel packaging for high-volume automated assembly.

Analog Devices LT6106CS5#TRPBF is a precision high-side current sense amplifier operating up to 36V supply, featuring 350µV maximum input offset voltage and 0.2MHz bandwidth in a compact SOT-23-5 package for accurate current monitoring.

► Ultralow noise: 9 µV rms, independent of VOUT ► No additional noise bypass capacitor required ► Stable with 1 µF ceramic input and output capacitors ► Maximum output current: 150 mA ► Input voltage range: 2.2 V to 5.5 V ► Low quiescent current ► IGND = 10 µA with zero load ► Low shutdown current: <1 µA ► Low dropout voltage: 105 mV at 150 mA load ► Initial output voltage accuracy: ±1% ► Up to 14 fixed output voltage options: 1.8 V to 3.3 V ► PSRR performance of 70 dB at 10 kHz ► Current limit

Analog Devices LTC6241HS8#PBF is a dual precision 18 MHz CMOS operational amplifier with low input bias current of 1.5 pA and 83 dB minimum CMRR in an 8-pin SOIC package. Input offset voltage is 400 µV maximum, ideal for precision signal chain designs. Available from stock with worldwide shipping.

The LTC6994CS6-2#TRPBF is a programmable delay block IC operating from 0°C to 70°C. It features a single-tap silicon delay line with true output polarity in a compact 6-pin SOT-23 package. Available on the spot market with worldwide shipping.