Analog Devices

VCO Oscillators VCO with Divide-by-4, 10.5 - 12.2 GHz

Digital Potentiometer ICs 5-Bit PB Up/Down DigiPOT

Fixed Attenuator 25GHz 10dB 6-Pin DFN EP Cut Tape WIDEBAND FIXED ATTENUATOR FAMILY, DC - 25 GHz HMC656LP2E / HMC657LP2E / HMC658LP2E

Digital to Analog Converters - DAC Octal 16-bit 8CH SPI VOUT

Analog Devices ADSP-21489BSWZ-4A, 32 bit, 40 bit Blackfin Digital Signal Processor 400MHz ROMLess 100-Pin LQFP

Operational Amplifiers - Op Amps 250mA Output Dual SGL-Supply

ANALOG DEVICES - AD7224KRZ-1 - DAC, 8BIT, 143KSPS, SOIC-20

ANALOG DEVICES - ADG2188BCPZ-REEL7 - CROSSPOINT SW, ANALOGUE, 8X8, LFCSP-32

QFN-16

Analog Comparators RR Fast 2.5-5.5V SGL-Supply TTL/CMOS

ANALOG DEVICES - ADM7170ACPZ-3.3-R7 - LDO, FIXED, 3.3V, 0.5A, LFCSP-8

Direct Digital Synthesizer 50MHz 1-DAC 10bit Serial Automotive 20-Pin TSSOP T/R

20 V, 200 mA, Low Noise, CMOS LDO Linear Regulator

Analog Comparators RR Fast 2.5-5.5V SGL-Supply LVDS

LTC6253HMS8#PBF is a dual 800 MHz rail-to-rail input/output op amp consuming only 3.5 mA supply current. Featuring 77 dB minimum CMRR and 2.5 µA max bias current at 25°C, it suits precision high-speed signal chain designs. Available in SOIC-8 package with worldwide shipping.

Analog Devices LT8640HUDC-1#PBF is a 42V, 6A synchronous step-down Silent Switcher DC/DC converter with 2.5µA quiescent current, current-mode control, and ultra-low EMI in an 18-lead LQFN package.

Analog Devices LTC2051HMS8#PBF is a dual-channel zero-drift operational amplifier featuring 3 µV maximum input offset voltage and 130 dB CMRR in an 8-pin SOIC package. It delivers precision signal amplification for DC and low-frequency applications with negligible offset drift over temperature. Available from stock with worldwide shipping.

AD8302 is an Analog Devices LF-to-3 GHz RF gain and phase detector IC with a 60 dB gain measurement dynamic range packaged in a compact 14-pin TSSOP. It outputs dual DC voltages proportional to gain difference and phase difference for precise RF signal characterization. Available in stock globally with competitive pricing and fast worldwide shipping.

Clock Generators & Support Products Hi Perf Clk Gen 2500MHz Fmax. 3.3V Only

OP Amp Quad Current Fdbk ±12V/24V 14-Pin PDIP N

RF Switch ICs High Pwr ,20W Peak SPDT,Reflective Swich

Analog Devices ADG736 is a dual SPDT (single-pole double-throw) analog switch designed for low-voltage operation, offering low on-resistance and wide signal bandwidth in a compact small-outline package. It enables signal routing in battery-powered and mixed-signal systems. Available in stock with worldwide shipping.

Active Filters Active RC, 4th Order Lpass Filt Fam

The LTC6253IMS#PBF is a high-speed 800MHz rail-to-rail input/output op-amp from Analog Devices with only 3.5mA supply current. It offers 105dB typical CMRR and 2.5µA maximum bias current in an 8-pin MSOP package. Suitable for power-efficient wideband signal processing and active filter designs.

Analog Devices LTC6253IMS-7#PBF is a 3 GHz gain-bandwidth, 3.5 mA supply current voltage-feedback op-amp with rail-to-rail I/O, 105 dB CMRR, and 130 MHz -3 dB bandwidth in an MSOP-8 package for high-speed signal processing.

Analog Devices LTC2057 is a single automotive-grade zero-drift chopper-stabilized op-amp operating on up to 36 V supply with rail-to-rail output. It achieves 150 dB CMRR and 0.2 nA input bias current, making it ideal for precision current sensing and signal conditioning in an 8-pin MSOP package.

LTC2952CUF#PBF is a pushbutton power path controller with system monitoring from Analog Devices in a 16-pin QFN package. It manages clean power-on and power-off sequencing via a single pushbutton, with adjustable hold-off timers, watchdog monitoring, and interrupt outputs for microcontroller supervision. Ideal for handheld devices, industrial instruments, and embedded systems requiring reliable soft power control.

LDO Voltage Regulators 1A CMOS Linear Reg

High Speed Operational Amplifiers 800MHz, 3.5mA Power Efficient Rail-to-Rail I/O Op Amps

The LTC6268IS8-10#TRPBF is a 4 GHz ultralow bias current FET-input operational amplifier from Analog Devices in an 8-pin SOIC package. It delivers an exceptionally low bias current of just 2 fA at 25°C and 77 dB typical CMRR, ideal for trans-impedance amplifier and photodetector applications. Available on tape-and-reel in lead-free packaging for high-volume precision instrumentation designs.

LDO Voltage Regulators 3.3/5Vin 2A Ultra Low Noise LDO ADJ

Use the download button to access the HMC253QS24ETR schematic symbol, PCB footprint, and 3D model.

0.300 INCH, PLASTIC, SO-20

LDO Voltage Regulators IC 300mA LDO CMOS

Analog Comparators Rail to rail,sing chan, TTL/CMOS Compara

Digital to Analog Converters - DAC 8-bit Vout DAC SC70 (2.5V ref, reset to zero scale) Single 12-/10-/8-Bit Rail-to- Rail DACs with 10ppm/°C Reference in SC70

The LTC1563-2CGN#PBF is a 4th-order active low-pass filter IC with a cutoff frequency range of 0.256 kHz to 256 kHz. It integrates resistors and capacitors in a 16-pin SSOP package for easy implementation. Available from authorized distributors with worldwide shipping.

Precision Amplifiers Dual Zero-Drift Op Amp

Analog Devices LTC7862EFE#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 20 pins, 140 V, -40°C to 125°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LT3579IUFD-1 is a multi-topology current-mode PWM switching regulator with 6 A output and 2.5 V to 16 V input range, housed in a compact 20-pin QFN package for flexible DC/DC power conversion in portable and industrial systems.

Analog Comparators Rail to rail,sing chan, TTL/CMOS Compara

LTC1550LCS8-2#PBF is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 8 pins, Small Outline Packages, and datasheet-backed parameters. Available through FindMyChip sourcing with worldwide shipping support.

The LT3462AEDC#TRPBF is a 300 mA inverting DC/DC converter operating at 2.7 MHz with 2.5 V to 16 V input, using current-mode PWM control in an 8-pin DFN package to generate negative supply rails for analog and mixed-signal circuits.

LT1723CMS8#PBF is a dual 200 MHz voltage-feedback operational amplifier from Analog Devices offering low noise and precision performance with 75 dB CMRR and 850 µV maximum input offset voltage. It suits high-speed signal conditioning, active filters, and precision instrumentation designs in an MSOP-8 package.

LVDS Interface IC MLVDS Xcvr,HD,200M Type 1 Rx,EnhancedESD

RS-232 Interface IC +5V RS232/RS485 Transceiver

Single Channel, 128-Position, I2C, ±8% Resistor Tolerance, Nonvolatile Digital Potentiometer

Analog Devices LTC6992IS6-1#TRMPBF is a voltage-controlled PWM oscillator with 0% to 100% duty cycle control via a 0.1 V to 0.9 V analog input. Operating from DC to 1 MHz frequency range, it is ideal for analog PWM signal generation, LED dimming, and motor control in a 6-pin SOT-23 package.

Analog Devices LTC6908CS6-2#TRPBF is a dual-phase spread-spectrum oscillator with programmable frequency from 10 kHz to 10 MHz in a 6-pin SOT-23 package. It reduces EMI in switching regulators and clocking circuits with integrated spread-spectrum frequency modulation (SSFM). Available from stock in tape-and-reel with worldwide shipping.

General Purpose Audio Codec 2ADC / 2DAC Ch Automotive 32-Pin LFCSP EP T/R