LTC6253IMS#PBF Analog Devices Connector (Small Outline Packages) In Stock
The LTC6253IMS#PBF is a high-speed 800MHz rail-to-rail input/output op-amp from Analog Devices with only 3.5mA supply current. It offers 105dB typical CMRR and 2.5µA maximum bias current in an 8-pin MSOP package. Suitable for power-efficient wideband signal processing and active filter designs.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 10
- Lifecycle
- OBSOLETE
- Datasheet
- LTC6253IMS#PBF Datasheet PDF
- Category
- Connector
- Price
- From $50.2538(MOQ 4)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of LTC6253IMS#PBF?
- 800MHz gain-bandwidth product enables high-speed wideband amplification
- Rail-to-rail input and output swing maximizes dynamic range on low supply voltages
- 3.5mA low supply current for power-efficient high-speed signal processing
- 105dB typical CMRR provides excellent common-mode noise rejection
- Frequency compensation for stable closed-loop operation in various gain configurations
What is LTC6253IMS#PBF used for?
The LTC6253IMS#PBF is optimized for high-speed ADC driver circuits and active anti-aliasing filters in data acquisition systems where 800MHz bandwidth supports fast signal settling within conversion windows. Its low 3.5mA supply current makes it ideal for battery-operated wideband communication and portable test instruments requiring both speed and power efficiency. The rail-to-rail I/O also suits single-supply video signal buffering and precision wideband transimpedance amplifier designs.
What are the specifications of LTC6253IMS#PBF?
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1661 |
| YTEOL | 0 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.7 µA |
| Bias Current-Max (IIB) @25C | 2.5 µA |
| Common-mode Reject Ratio-Min | 77dB |
| Common-mode Reject Ratio-Nom | 105dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 1400 µV |
| JESD-30 Code | S-PDSO-G10 |
| JESD-609 Code | e3 |
| Low-Bias | NO |
| Low-Offset | NO |
| Micropower | NO |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 170V/us |
| Supply Current-Max | 22mA |
| Supply Voltage Limit-Max | 5.5V |
| Supply Voltage-Nom (Vsup) | 2.7V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Unity Gain BW-Nom | 630000 |
| Voltage Gain-Min | 1800 |
| Wideband | YES |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia |
Where can I find the LTC6253IMS#PBF datasheet?
LTC6253IMS#PBF Datasheet DownloadOfficial datasheet from Analog Devices
What are equivalent replacements for LTC6253IMS#PBF?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the 800MHz bandwidth of LTC6253IMS#PBF compare to standard general-purpose op-amps for ADC driving?
The LTC6253IMS#PBF provides 800MHz gain-bandwidth product, which is roughly 100x to 800x faster than general-purpose op-amps with 1MHz to 8MHz bandwidth. This high bandwidth is essential when driving high-speed ADCs with sample rates of 10Msps or above, as the op-amp must settle to the required accuracy within the ADC acquisition window of a few nanoseconds.
What supply current does the LTC6253IMS#PBF draw, and how does this enable portable designs?
The LTC6253IMS#PBF consumes only 3.5mA supply current while achieving 800MHz bandwidth, giving an exceptional speed-to-power ratio compared to typical high-speed op-amps that may draw 10mA to 30mA for similar performance. This low current makes it viable in battery-powered handheld instruments, portable spectrum analyzers, and wearable sensor front ends where both speed and battery life matter.
Can LTC6253IMS#PBF be used for active filter designs in industrial signal chains?
Yes, the LTC6253IMS#PBF is well suited for multi-pole active Butterworth, Chebyshev, or Bessel filters up to several hundred MHz thanks to its 800MHz bandwidth and frequency compensation for stable gain. Industrial signal chains using 12-bit or 16-bit ADCs at 1Msps to 5Msps benefit from its rail-to-rail output and 77dB minimum CMRR for anti-aliasing with minimal signal distortion.
What is the CMRR of the LTC6253IMS#PBF and how does it help in differential signal measurement?
The LTC6253IMS#PBF achieves a minimum CMRR of 77dB and a typical 105dB at low frequencies. A 105dB CMRR means common-mode interference is attenuated by a factor greater than 178,000x, which is critical in industrial sensor interfaces subject to ground noise, electromagnetic interference, and power supply ripple exceeding several hundred millivolts.
Related Guides
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
150141YS73100 Yellow LED Indicator Design and Validation Guide
Design and validate a 150141YS73100 yellow indicator with current-limit calculations, GPIO checks, PWM control, and enclosure visibility tests.
Nov 5, 2026
How to Choose an LMG1020YFFR GaN Gate Driver: Selection and Sourcing Guide
Compare LMG1020 and LMG1210 circuit roles, gate-drive requirements, ordering codes, and sourcing evidence before approving a GaN driver.
Nov 4, 2026
150141YS73100 LED Selection and Procurement Guide
Evaluate 150141YS73100 and four related LEDs using optical, electrical, mechanical, and sourcing checks before production approval.
Nov 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
LT3062EDCB#TRPBF
Small Outline No-lead
Integrated Circuit
LT3062EDCB#TRMPBF
Small Outline No-lead
Integrated Circuit
LT8641IUDC#TRPBF
Other
Integrated Circuit
HMC412AMS8GTR
Small Outline Packages
Integrated Circuit
LT3062HMS8E#PBF
Small Outline Packages
Integrated Circuit
LT3062IMS8E#PBF
Small Outline Packages
Integrated Circuit
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 4+ | $57.9851 | $231.94 |
| 5+ | $56.0523 | $280.26 |
| 6+ | $50.2538 | $301.52 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
CLE-110-01-G-DV-TR
SAMTEC
Connector
CLE-110-01-G-DV-A-TR
SAMTEC
Connector
CLE-110-01-G-DV-A
SAMTEC
Connector
TSM-103-01-TM-DV
SAMTEC
Connector
TSM-103-01-T-SH
SAMTEC
Connector
TSM-103-01-T-DV
SAMTEC
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector