Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
11,416
Total Products
25
Categories
All Analog Devices Components
Showing 4,051–4,100 of 11,416
LT6016HMS8#TRPBF is a dual general-purpose rail-to-rail input/output operational amplifier from Analog Devices, operating from ±15V or 30V single supply. It offers 110 dB CMRR, 15 µV offset voltage, and meets AEC-Q100 automotive qualification for harsh-environment designs.
Switching Voltage Regulators 2A 700KHz NonSync Step-Down
The LTC4162EUFD-L41#PBF is a multi-cell lithium-ion step-down battery charger with PowerPath control and I2C telemetry, supporting up to 35V input and 3.2A charge current. It features precise 4.1V/cell charging, input current limiting, and real-time monitoring via I2C. Available in a 28-pin QFN package with worldwide shipping.
Data Acquisition ADCs/DACs - Specialized Energy Meter IC w/Int Oscillator
40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator
LDO Voltage Regulators 600mA Ultra-Low-Nois High-PSRR LDO ADJ
Analog Devices ADAU1701 is a complete SigmaDSP audio processor integrating 2 ADC inputs, 4 DAC outputs, and a powerful 28/56-bit audio DSP core in a single chip. Available in stock worldwide with competitive pricing.
The LTC6253IMS8#TRPBF is a power-efficient 800 MHz rail-to-rail input/output op-amp with 3.5 mA supply current, 105 dB typical CMRR, and ultra-low 0.7 µA average bias current for high-speed signal processing applications. It uses voltage-feedback architecture with full rail-to-rail I/O swing, maximizing dynamic range in single-supply designs. Available from stock with worldwide shipping.
SOIC-16
Voltage References LOW NOISE, MICROPWR PRECISION VOLT. REF.
LT1021DCN8-5#PBF is a precision 5 V three-terminal voltage reference in an 8-pin DIP package, with 20 ppm/°C maximum temperature coefficient and 10 mA output current capability. Available from stock with worldwide shipping.
Analog Devices LT3081ER#TRPBF is a rugged 1.5A adjustable LDO linear regulator with single-resistor output programming and 1.23V dropout in a 7-pin MSOP-like package. It supports parallel operation for high-current applications and withstands reverse current, reverse input voltage, and reverse output voltage for robust industrial and communications power rails.
Analog to Digital Converters - ADC Quad, 16-Bit, 400ksps Differential ±5V Input SoftSpan ADC with Wide Input Common Mode Range
LDO Voltage Regulators 600mA Ultra-Low-Nois High-PSRR LDO ADJ
LDO Voltage Regulators 600mA Ultra-Low-Nois High-PSRR LDO ADJ
Clock Synthesizer / Jitter Cleaner
Analog Devices LTC6655CHMS8-5#PBF is an ultra-low-noise 5 V precision voltage reference in an MSOP-8 package. Delivers 4.9975 V to 5.0025 V output with extremely low noise and tight initial accuracy. Available from stock with worldwide shipping.
Analog Devices LTC1064-2 switched-capacitor low-pass filter with 140 kHz maximum cutoff frequency in 16-pin SOIC package. Supports single or dual supply operation up to ±7.5V with 8th-order Butterworth response. Available from stock with worldwide shipping.
► isoPower integrated, isolated dc-to-dc converter ► 100 mA output current for ADuM6020 ► 60 mA output current for ADuM6028 ► AEC-Q100 qualified for automotive applications ► Meets CISPR22 Class B emissions limits at full load on a 2‑layer PCB
LC2MOS 16-Bit Voltage Output DAC
LDO Voltage Regulators 800mA ULN LDO 5.0Vo
Voltage References 4.096V CMOS 8ppm/C Voltage REF
The LT5400BCMS8E-4#PBF is a precision dual matched resistor network from Analog Devices featuring two 1 kΩ elements with ultra-low tracking error and 0.8 W dissipation rating. Its isolated network topology ensures high common-mode rejection for differential signal paths. Surface-mount MSOP-8 package available in stock worldwide.
Analog Devices LTC6102HMS8-1#PBF is a precision current sense amplifier with 200 kHz bandwidth, 50 µV max input offset voltage, and 20 nA max bias current in an MSOP-8 package. Available from stock with worldwide shipping.
LTC2956IMS-1#PBF is a pushbutton power controller and wake-up timer IC from Analog Devices featuring programmable hold times, debounced pushbutton input, interrupt output, and supervisor functions in a 12-pin TSSOP. Handles power-on sequencing and orderly shutdown for portable systems. Available worldwide with fast shipping.
Data Acquisition ADCs/DACs - Specialized 1 PH Mtr IC w/Auto Calibration
Analog Devices LT6105HMS8#PBF is a precision high-side current sense amplifier with -0.3V to 44V common-mode range, 120 dB typical CMRR, and 0.8 µV maximum input offset voltage in an 8-pin SOIC package. In stock worldwide.
Accelerometer Triple ±0.5g/±1g/±2g/±4g 3.3V Automotive 32-Pin LFCSP EP T/R
The LTC4057ES5-4.2#TRPBF is a standalone linear Li-Ion battery charger IC with a 4.2V charge termination voltage and programmable charge current up to 600mA, designed for single-cell lithium-ion and lithium-polymer batteries. It features an adjustable charge current threshold and a thermistor input for temperature-qualified charging, all in a compact 5-pin TSOT-23 package. Available in tape-and-reel from Analog Devices with worldwide shipping.
The LT6654AHS6-1.25#TRMPBF is a precision 1.25V three-terminal voltage reference with ±0.2% initial accuracy, 100mA output current capability, and low temperature drift, designed for high-accuracy ADC and DAC reference applications. It operates from input voltages up to 12.6V and is housed in a compact 6-pin SOT-23 package for space-constrained designs. Available from Analog Devices in tape-and-reel with worldwide shipping.
The LTC6409HUDB#TRMPBF is a high-speed differential amplifier with 10 GHz gain-bandwidth product and ultra-low noise of 1.1 nV/√Hz, ideal for wideband signal processing. It offers 85 dB common-mode rejection ratio and supports supply voltages from 3.3 V to 5 V. Available from stock with worldwide shipping.
LTC2953CDD-2#PBF is a pushbutton on/off controller integrating dual-input battery monitoring, output supervision, and interrupt generation for system power management. Features adjustable thresholds in a 12-pin DFN package. Available from stock worldwide at competitive pricing.
Analog Switch Triple SPDT 16-Pin TSSOP T/R
Analog Devices LTC2453CTS8#TRMPBF is a 16-bit delta-sigma ADC with I2C interface, achieving 60Hz output rate and ±0.0153% linearity error. Operates from -5.5V to +5.5V analog input range in compact SOT-23 8-pin package. Available from stock worldwide with competitive pricing.
LT5400BCMS8E-1#PBF is a 8 pins resistor network by Analog Devices. Key specs: 8 pins, 8-pin package, Resistor Networks & Arrays Quad Matched Resistor Network, Quad 10K. From quote-based sourcing, in stock checks support worldwide shipping.
Analog Devices LT3066EMSE-3.3#PBF is a 45 V input, 500 mA fixed 3.3 V output LDO linear regulator with programmable current limit. It features low noise performance and an output discharge function. Housed in a 12-lead MSOP package for space-efficient power supply designs.
Operational Amplifier, Dual AMP, Bipolar/JFET, 8 Pin, Plastic, DIP
Sensor and Detector Interface 5.5V 106mA 24-Pin QFN EP Reel
The LTC4368CMS-2#PBF is a 100 V over-voltage, under-voltage, over-current, and reverse supply protection controller from Analog Devices with a -3 mV reverse threshold in a 10-pin MSOP package. It provides adjustable thresholds for comprehensive supply rail protection up to 100 V. Suitable for industrial power management, telecom equipment, and automotive systems requiring robust input surge protection.
4-CH, DIFFERENTIAL MULTIPLEXER
Fixed Attenuator 25GHz 10dB 6-Pin DFN EP T/R
Switching Voltage Regulators 1.2A 20V 700kHz Nonsync Step-down
Interface - Signal Buffers, Repeaters Supply Independent I2C Bus Buffer
Comparator Single ±5.5V/11V 8-Pin MSOP T/R
Switching Controllers PWM with 0% to 100% Pulse Width Control
Digital to Analog Converters - DAC 12-Bit Vout DAC SC70 (2.5V ref, reset to mid-scale)
LTC6363IMS8-2#PBF is a Analog Devices integrated circuit for industrial electronics and embedded systems. Key specs include 35 MHz, 8 pins, and TSSOP. From quoted pricing with in stock worldwide shipping support.
Analog to Digital Converters - ADC Quad, 16-Bit, 2Msps/ch Simultaneous Sampling SAR ADC
Switching Controllers PWM with 5% to 95% Pulse Width Control
The LTC6102HVCMS8#PBF is a high-voltage zero-drift current sense amplifier from Analog Devices with a 50 µV maximum input offset voltage and 0.02 µA maximum bias current. It delivers precision shunt-resistor current measurement in high-voltage power systems within an MSOP-8 package.
Need Analog Devices Components?
Get competitive quotes from authorized China distributors
Request a Quote