LTC6102HVCMS8#TRPBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock

LTC6102HVCMS8#TRPBF is a high-voltage, zero-drift current sense amplifier in an MSOP-8 package. It delivers 50 µV maximum input offset voltage, 0.02 µA bias current, and operates from supplies up to 60 V. Available from stock worldwide with competitive pricing.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LTC6102HVCMS8#TRPBFSmall Outline Packages
Quick Facts
Manufacturer
Analog Devices
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $2.8600(MOQ 19)
Temp Range
?°C to 70.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Zero-drift architecture achieves maximum 50 µV input offset voltage for high-accuracy current sensing
  • Supports high-side supply voltages up to 60 V enabling wide-range power monitoring
  • Ultra-low bias current of 0.02 µA minimizes measurement error on high-impedance sense resistors
  • MSOP-8 package enables compact PCB footprint in space-constrained designs

Applications

The LTC6102HVCMS8#TRPBF is well-suited for high-side current monitoring in industrial power supplies and battery management systems operating up to 60 V rails. Its zero-drift topology ensures accurate current measurement in motor drive circuits and telecom equipment where supply voltages exceed typical op-amp limits. It also fits precision instrumentation and energy metering applications that require stable, low-offset sensing over temperature.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1660
YTEOL10
Amplifier TypeOPERATIONAL AMPLIFIER
ArchitectureVOLTAGE-FEEDBACK
Average Bias Current-Max (IIB)0.02 µA
Bias Current-Max (IIB) @25C0.02 µA
Frequency CompensationYES
Input Offset Voltage-Max50 µV
JESD-30 CodeS-PDSO-G8
JESD-609 Codee3
Low-BiasNO
Low-OffsetYES
MicropowerNO
Number of Functions1
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP8,.11
Package ShapeSQUARE
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Packing MethodTR
Peak Reflow Temperature (Cel)260
PowerNO
Programmable PowerNO
Supply Current-Max0.675mA
Supply Voltage Limit-Max105V
Supply Voltage-Nom (Vsup)12V
Surface MountYES
TechnologyCMOS
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Unity Gain BW-Nom200
WidebandNO
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.33.00.01

Datasheet

LTC6102HVCMS8#TRPBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the maximum input offset voltage of LTC6102HVCMS8#TRPBF and why does it matter for current sensing?

The LTC6102HVCMS8#TRPBF specifies a maximum input offset voltage of 50 µV. In high-side current sensing, even small offset errors translate directly into measurement inaccuracy proportional to the shunt resistor value, so a 50 µV ceiling ensures reliable milliampere-level resolution across temperature and supply variations in industrial and telecom designs.

Up to what supply voltage can LTC6102HVCMS8#TRPBF operate, and which power applications benefit most?

LTC6102HVCMS8#TRPBF supports high-side supply voltages up to 60 V, making it a strong fit for 24 V to 48 V industrial bus monitoring, telecom rectifier rails, and solar energy systems. Standard op-amps rated to 5 V or 15 V cannot handle these rails, so this device fills a critical gap for high-voltage power management circuits.

How does the MSOP-8 package of LTC6102HVCMS8#TRPBF compare in board area to alternatives like SO-8?

The MSOP-8 package measures approximately 3 mm × 3 mm with a 0.65 mm pitch, roughly 40% smaller in footprint than a standard SO-8 package at 3.9 mm × 4.9 mm. For compact motor-control or battery monitor PCBs where space is at a premium, the MSOP-8 footprint of LTC6102HVCMS8#TRPBF provides meaningful routing relief alongside the 8-pin signal configuration.

What is the maximum bias current of LTC6102HVCMS8#TRPBF and how does it affect shunt resistor selection?

Maximum bias current is 0.02 µA at 25°C. With such a low input bias current, designers can use higher-value shunt resistors—up to several hundred kilohms in some topologies—without introducing significant voltage errors, which helps reduce power dissipation in the sensing network while maintaining accuracy across the full operating temperature range.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $2.8600
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
19+$3.7900$72.01
500+$3.1125$1556.25
1000+$2.8600$2860.00
pcs
Unit price: $3.7900 · Total: $72.01

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India