Analog Devices

Analog Devices LTC6994HDCB-1#TRMPBF is a silicon delay line IC with rising or falling edge trigger capability, single output, and programmable delay for timing control applications. Housed in a compact 6-pin SOT-23 package for space-constrained designs. Available from stock with worldwide shipping.

Analog Devices LT5400BCMS8E-1#TRPBF is a quad matched resistor network with 10 kΩ nominal resistance in an MSOP-8 surface-mount package. Offers 0.01% matching accuracy and 2 ppm/°C tracking TCR for precision analog circuit design. Available from stock worldwide with fast shipping.

Analog Devices LTC4355IDE#PBF is a positive high-voltage ideal diode-OR controller with 2 channels in a 14-pin small outline no-lead (SON) package for redundant power supply ORing applications. Replaces Schottky diodes with low-loss MOSFET switching to minimize power dissipation in high-availability systems. Available in RoHS-compliant format with worldwide stock and fast shipping.

The LTC4355HMS#PBF is a positive high-voltage ideal diode-OR controller from Analog Devices designed for redundant power supply systems. It drives an external N-channel MOSFET to create a near-zero forward voltage drop ideal diode function in a 16-pin SSOP package. Available from stock worldwide with competitive pricing.

1/1 Transceiver, Isolated Full RS422, RS485 16-SOIC

Gate Drivers Full Bridge N-Ch Pwr MOSFET Drvr

Analog Switch Quad SPST 16-Pin LFCSP EP T/R

SOIC-8

Digital Isolators 2.5kVrms 150Mbps Four Channel 2/2 Digital Isolator

LT1787HVIMS8 is a high-voltage single current sense amplifier from Analog Devices operating up to 60 V common-mode in an 8-pin MSOP package. It measures current via a shunt resistor on high-side or low-side rails with precision output voltage proportional to current. Ideal for power monitoring, battery management, and industrial motor current sensing applications.

Battery Management 35V/3.2A Multi-Cell Lithium-Ion Step-Down Battery Charger with PowerPath and I2C Telemetry

isoPower integrated, isolated dc-to-dc converter ► 100 mA output current for ADuM6020 ► 60 mA output current for ADuM6028 ► AEC-Q100 qualified for automotive applications ► Meets CISPR22 Class B emissions limits at full load on a 2‑layer PCB

LTC1550LCMS8-2.5 is a low-noise switched-capacitor regulated voltage inverter from Analog Devices, accepting 2.7 V to 5.25 V input and generating a regulated -2.5 V output at up to 20 mA, packaged in an 8-pin SOIC.

Analog Devices MAX3676EHJ+T is a clock and data recovery IC for OC-12/STM-4 fiber optic links, operating at 622 Mbps from a single 3.3V supply. It extracts a low-jitter clock from the serial data stream and provides PECL-compatible clock and data outputs. Available from stock with worldwide shipping.

LDO Regulator Pos 1.275V to 60V 0.05A Automotive 8-Pin MSOP EP

Analog Devices LTC2320IUKG-16#TRPBF is an octal 16-bit simultaneous sampling SAR ADC achieving 1.5 Msps per channel across 8 inputs. Features differential input range of ±2.034 V to ±2.064 V with 0.0183% linearity error in a 52-pin QFN package. Available in tape-and-reel with worldwide shipping for high-volume procurement.

Analog Devices LT6108AIMS8-2 is a high-side current sense amplifier with integrated reference and comparators in an 8-pin MSOP package. It achieves 125 dB CMRR and 250 µV maximum input offset voltage for precise current monitoring. Available from stock with worldwide shipping.

Clock Generators & Support Products 622Mbps, 3.3V Clock-Recovery and Data-Retiming IC with Limiting Amplifier

LTC2333HLX-18#PBF is an 18-bit, 800 kSPS successive-approximation ADC from Analog Devices housed in a 48-LQFP package. It accepts ±10.24 V true bipolar inputs with 0.55 µs conversion time and features a high-voltage SPI-compatible interface. Available from stock worldwide with fast shipping.

SP Amp DIFF AMP Dual 5.25V 24-Pin LFCSP EP T/R

Analog Devices LTC4226IUD-2#TRPBF is a dual-channel hot-swap controller operating from 4.5 V to 44 V with auto-retry, housed in a 16-lead QFN package for compact board-level power management.

Battery Management Monolithic Li-Ion Battery Charger

Analogue Switch ICs Low-Voltage, Single-Supply Dual SPST/SPDT Analog Switches

LTC3586EUFE#PBF is a high efficiency USB power manager with dual buck, boost, and buck/boost DC/DC converters from Analog Devices, housed in a 38-pin QFN package. It integrates 4-channel power conversion with battery charger and USB power management in a single IC. Available worldwide with same-day shipping for portable and IoT power system designs.

Analog Devices LT3045EMSE-1#PBF is a 20 V, 500 mA ultralow-noise LDO linear regulator with −4 dBm output noise and 76 dB PSRR at 1 MHz in a 12-lead MSOP-EP package. It features programmable current-limit and adjustable output voltage for sensitive RF and precision analog supplies. Available from stock with worldwide shipping.

LT3045EMSE#TRPBF is a high-performance positive adjustable linear voltage regulator from Analog Devices in a 12-MSOP-EP package, delivering up to 500 mA output current with ultra-low 0.22 V typical dropout voltage. It achieves 0.0033% load regulation and excellent noise performance. Available in stock with worldwide shipping.

Board Mount Temperature Sensors 2-Channel Temperature Monitor with Dual, Automatic, PWM Fan-Speed Controller

MAXIM INTEGRATED PRODUCTS - MAX2057ETX+ - RF Amplifier, 1.3GHz to 2.7GHz, 15.5dB Gain, 6dB Noise, 4.75V to 5.25V, TQFN-EP-36

ICL7660CUA is a switched-capacitor voltage converter that inverts or doubles an input supply voltage from 1.5 V to 10 V with no inductors required. It delivers output currents up to 20 mA with only two external capacitors, operating across a wide temperature range. Available from Analog Devices in a small outline package with worldwide shipping.

Board Mount Temperature Sensors 2Ch Temperature Monitor

Digital Signal Processors & Controllers - DSP, DSC 2xSHARC(no ARM&reduced conn)dualDDR,HPCP

Conv DC-DC 3V to 25V Step Down Single-Out 1.2V to 20V 1.5A 8-Pin MSOP

Analog Devices LT1713IMS8 is a single rail-to-rail I/O comparator operating from ±6V or 12V single supply with 4 mV maximum input offset voltage. Features 2 µA bias current at 25°C and 5 µA maximum, housed in a compact 8-pin MSOP package. Ideal for precision threshold detection and window comparator circuits in space-constrained designs.

Processor Supervisor 3.085V/2.337V/Adj 3 Active Low/Open Drain Automotive 8-Pin MSOP

Analog Devices LTC1751EMS8 is a switched-capacitor charge pump voltage doubler accepting 2 V to 5.5 V input, delivering a regulated stepped-up output for SRAM, LCD, and low-power system applications in an 8-pin MSOP package.

Analog Devices LTC2634IUD-HZ12#PBF is a 12-bit quad SPI DAC with an integrated 4.096 V reference and reset-to-zero-scale function in a 16-lead QFN package. Delivers four simultaneous analog output channels with serial interface and excellent linearity. Available from stock with worldwide shipping.

Processor Supervisor 3.086V/2.338V/Adj 3 Active Low/Open Drain Automotive 8-Pin MSOP Tube

Battery Management High Efficiency Bidirectional Multicell Battery Balancer

Analog Devices LT3010MPMS8E-5 is a 5 V fixed-output low-dropout linear regulator rated for 80 V input and 50 mA output, housed in a compact 8-pin MSOP-EP package for space-constrained designs.

Analog Devices LT1997IMS-2#PBF is a precision operational amplifier with 118 dB typical CMRR. It offers ultra-low bias current of 5 nA at 25°C in a compact MSOP package. Available from stock with worldwide shipping.

LDO Regulator Pos 1.275V to 60V 0.05A Automotive 8-Pin MSOP EP

Analog Devices LTC3621IMS8E#PBF is a synchronous step-down DC-DC converter with 2.7V to 17V input range, 0.6V to 17V adjustable output, and 1A output current, qualified for automotive use. It uses current-mode control with pulse skip mode for high efficiency across load conditions. Available in an 8-pin MSOP-EP package with worldwide shipping.

LDO Regulator Pos 1.275V to 60V 0.05A Automotive 8-Pin MSOP EP Tube

Analog Devices HMC435AMS8G is a DC to 4 GHz SPDT high-isolation RF switch IC with 1.8 dB maximum insertion loss, 30 dB minimum port isolation, 30 dBm 1 dB compression point, and 50 Ω impedance in an SMT package for wireless and test equipment applications.

The Analog Devices LTC3621HMS8E-2#PBF is an automotive-grade synchronous step-down DC-DC converter with a 2.7 V to 17 V input range and up to 1 A output current in an 8-pin MSOP with exposed pad. It supports pulse-skip mode for high light-load efficiency and an adjustable output from 0.6 V to 17 V, making it ideal for automotive and industrial power rails. Available from stock worldwide with lead-free RoHS-compliant packaging.

Analog Devices LT1997HDF-3#PBF is a precision rail-to-rail operational amplifier in a compact 14-pin DFN (4x4 mm) package, featuring 200 µV maximum input offset voltage and 90 dB minimum CMRR. It delivers high accuracy for signal conditioning in space-constrained designs. Available from authorized distributors with worldwide shipping.

Analog Devices LTC3621HMS8E-5#PBF is a step-down DC-DC switching regulator with 2.7 V to 17 V input range, fixed 5 V output at 1 A, in an automotive-grade 8-pin MSOP EP package with current-mode control and pulse-skip mode for efficient low-power operation.

Accelerometer Triple ±16g 3V 50mV/g to 64mV/g Automotive 12-Pin LFCSP EP T/R

The LT1996CMS#PBF is a precision gain-selectable differential amplifier from Analog Devices featuring 100 dB typical CMRR and 120 dB nominal common-mode rejection for accurate signal acquisition. It operates as a voltage-feedback operational amplifier with ultra-low 5 nA bias current in a compact MSOP package. Available worldwide for precision instrumentation, data acquisition, and industrial sensing applications.

Analog to Digital Converters - ADC 20-Bit, 1 MSPS, Diff PulSAR ADC