LTC4440EMS8E-5 Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices LTC4440EMS8E-5 is a high-side MOSFET gate driver delivering 1.1 A peak output current in an 8-pin MSOP with exposed pad. It features a gated Schmitt trigger input and supports both full-bridge and half-bridge topologies for non-inverting drive configurations. Available from authorized distributors with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 9
- Lifecycle
- OBSOLETE
- Datasheet
- LTC4440EMS8E-5 Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 1.1 A peak output current capability for fast MOSFET switching in high-side half-bridge and full-bridge power stages
- Gated Schmitt trigger input improves noise immunity and prevents false triggering in electrically noisy power conversion environments
- 8-pin MSOP with exposed pad (MSOP-EP) offers a compact 3x3 mm footprint with enhanced thermal dissipation
- High-side driver architecture with bootstrap supply support enables direct N-channel MOSFET drive above supply rail voltage
Applications
The LTC4440EMS8E-5 is used to drive high-side N-channel MOSFETs in synchronous buck converters, half-bridge and full-bridge motor driver stages, and class-D audio amplifiers operating from supplies up to the device's rated bootstrap voltage. Its 1.1 A drive capability enables rapid charge and discharge of large gate capacitances, reducing switching losses at frequencies above 100 kHz. The compact MSOP-EP package makes it well-suited for space-constrained DC-DC converter modules and power management ICs in industrial and consumer electronics.
Specifications
| YTEOL | 0 |
| High Side Driver | YES |
| Input Characteristics | GATED SCHMITT TRIGGER |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| JESD-30 Code | S-PDSO-G8 |
| JESD-609 Code | e0 |
| Number of Functions | 1 |
| Output Characteristics | STANDARD |
| Output Peak Current Limit-Nom | 1.1A |
| Output Polarity | TRUE |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH |
| Qualification Status | Not Qualified |
| Supply Current-Max | 0.325mA |
| Supply Voltage-Max | 15V |
| Supply Voltage-Min | 4V |
| Supply Voltage-Nom | 6V |
| Supply Voltage1-Nom | 6V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Turn-off Time | 0.065 µs |
| Turn-on Time | 0.065 µs |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.60 |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What peak output current does the LTC4440EMS8E-5 deliver, and what topologies does it support?
The LTC4440EMS8E-5 provides 1.1 A peak output current and supports high-side drive in both half-bridge and full-bridge converter topologies. Its non-inverting output polarity ensures the driven MOSFET turns on and off in direct response to the input signal without additional inversion logic.
How does the gated Schmitt trigger input on the LTC4440EMS8E-5 benefit noisy power converter designs?
The gated Schmitt trigger input adds hysteresis to the switching threshold, typically around 0.5 V, which prevents spurious gate pulses caused by PCB noise or coupled transients. This is especially valuable in high-frequency switching regulators above 200 kHz where rapid dV/dt transitions can couple into logic-level control signals.
Which package does the LTC4440EMS8E-5 use and how does the exposed pad improve thermal performance?
The LTC4440EMS8E-5 is housed in an 8-pin MSOP with exposed pad (MSOP-EP). The exposed pad provides a low thermal resistance path to the PCB ground plane, reducing junction-to-board thermal resistance compared to a standard MSOP-8 package, which is beneficial when driving high capacitance MOSFET gates at switching frequencies above 500 kHz.
When would a designer choose the LTC4440EMS8E-5 over a lower current gate driver in a synchronous buck converter?
A designer would select the LTC4440EMS8E-5 when the high-side MOSFET has a gate charge above 20 nC and switching frequency exceeds 200 kHz, where a 1.1 A driver significantly reduces turn-on and turn-off transition times, lowering switching losses and improving converter efficiency compared to 400 mA or 600 mA alternatives.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”