Analog Devices

MAXIM INTEGRATED PRODUCTS - MAX4253EUB+ - Operational Amplifier, 2 Amplifier, 3 MHz, 0.3 V/µs, ± 1.2V to ± 2.75V, 2.4V to 5.5V, µMAX, 10 Pins

Analog Devices LT3579EUFD#PBF is a 6 A boost and inverting DC/DC converter IC with integrated fault protection, operating from 2.5 V to 16 V input. Uses current-mode PWM control for fast transient response in a compact 20-lead QFN package. Available from authorized distributors with worldwide shipping.

Hot Swap Controller 1-CH 15V N-Channel Positive Low Voltage 24-Pin QFN EP Tube

LDO Voltage Regulators Ultra-Low Noise 200mA LDO

LDO Voltage Regulators 200mA L/N Negative LDO in Thin SOT

LDO Voltage Regulators 200mA LDO 3.3Vout

MAXIM INTEGRATED PRODUCTS - MAX4617EUE+T - ANALOGUE MUX/DEMUX, 8:1, -40 TO 85DEG C

Digital to Analog Converters - DAC 5V, Low-Power, Parallel-Input, Voltage-Output, 10-Bit DAC

2.5V–5.0V, 0.5A/2.5A Reversible Buck/Boost Regulator for Backup Power Applications

LDO Voltage Regulators 200mA LDO 25Vout

Analog Devices LTC2876CMS8E#TRPBF is a 60 V fault-protected RS-485/RS-422 and PROFIBUS line transceiver IC in an 8-lead MSOP package. It operates from 3 V or 5 V supply with differential Schmitt trigger inputs for robust noise immunity. Available from stock worldwide with fast shipping.

LDO Voltage Regulators Ultra-Low Noise 200mA LDO

MAXIM INTEGRATED PRODUCTS - MAX708RCUA+ - Supervisory/Monitor, Active-High/Low, Push-Pull Reset, 1V to 5.5V Supply, 2.63V Threshold, µMAX-8

Analog Devices MAX40056FAWA+ is a bidirectional current sense amplifier with PWM-rejection using chopper-stabilized architecture. It offers 140dB nominal CMRR and 300µV maximum input offset voltage for precision measurement. Packaged in an 8-pin WLCSP BGA, it targets motor drive and power conversion applications.

Phase Locked Loops - PLL Clock Generation PLL

Analog Devices LT3032MPDE-12#PBF is a dual 200 mA positive/negative low-noise LDO linear regulator with 0.27 V maximum dropout and 2.3 V to 20 V input range, available in a DFN package for precision analog applications.

The LTC2876CMS8E#PBF is a 60V fault-protected RS-485/RS-422 transceiver IC in an MSOP-8 package, featuring differential Schmitt trigger inputs and support for up to 256 nodes. Priced competitively, it is in stock with worldwide shipping available.

LT3483ES6#TRPBF is a 200 mA, 40 V inverting DC/DC converter from Analog Devices using constant off-time (COT) current-mode control, operating from 2.5 V to 16 V input in a compact SOT-23-6 package. It generates negative output voltages from a positive supply with no external sense resistor needed.

The LT3472EDD#PBF is a dual-output DC-DC converter from Analog Devices that generates both a positive output from 1.25V to 34V and a negative output down to -34V from a 2.2V to 16V input, making it ideal for automotive and industrial designs. It uses current-mode PWM control in a compact 10-pin DFN package with an exposed pad for enhanced thermal performance.

Current Sense Amplifiers Current Sense Amplifier

Analog Devices LTC2876IMS8E#PBF is a 60 V fault-protected RS-485/PROFIBUS transceiver IC compliant with EIA-422 and EIA-485 standards, featuring differential Schmitt trigger inputs for robust noise immunity. It supports 3 V supply operation and integrates a single-bit driver in an 8-pin MSOP small outline package. Available with worldwide shipping for industrial field-bus designs.

Current Sense Amplifiers Current Sense Amplifier High Voltage, High-Side Current Sense Amplifier in SOT-23

The LTC6101HVCCS5#TRPBF is an Analog Devices high-voltage current sense amplifier in a 5-pin SOT-23 package that accurately measures current over a wide common-mode voltage range. Designed for high-side current monitoring, it delivers a proportional output voltage with minimal offset error. Lead-free tape-and-reel packaging supports automated high-volume PCB assembly.

Analog Devices MAX17542GATB+ is a synchronous step-down DC/DC converter with a 4.5 V to 42 V input range, 600 kHz fixed switching frequency, and current-mode PWM control in a compact 10-pin TDFN package. Output voltage is adjustable from 0.9 V to 38.64 V. Available from authorized distributors with worldwide shipping.

VCO Oscillators VCO, GaAs, RF/2, 12.48-13.72GHz

MAXIM INTEGRATED PRODUCTS - MAX3643ETG+ - Laser Diode Driver, SFP/SFF Optical Modules, 3V to 3.6V, TQFN-24

Analog Devices LT6656AIS6-2.5#TRMPBF is an automotive-grade precision 2.5 V voltage reference with ±0.05% initial accuracy and 5 mA output current in a 6-pin TSOT-23 package. Delivers ultra-low temperature coefficient of 10 ppm/°C with output stable from -40°C to +125°C. Available in tape-and-reel Pb-free packaging for automated SMT assembly worldwide.

Driver 3A 2-OUT High and Low Side Non-Inv Automotive 8-Pin MSOP EP T/R

Analog to Digital Converters - ADC 24-Bit, 6-Channel, 64ksps, Delta-Sigma ADC with PAG and I2C and SPI Interface

Analog Devices LTC4444EMS8E-5#TRPBF is a dual-output high-side and low-side MOSFET gate driver delivering 1.75 A peak current, housed in an 8-pin MSOP EP package. It features Schmitt trigger inputs, totem-pole outputs, and AEC-Q100 automotive qualification for harsh environments. Available on tape and reel for automated assembly with worldwide distribution.

The LTC4444HMS8E is a high-side and low-side MOSFET gate driver with 3 A output drive capability, designed for half-bridge configurations in automotive applications. It features Schmitt trigger inputs and accepts a wide supply range. Stocked globally with worldwide shipping available.

Analog Devices LTC6102CMS8-1#TRPBF is a zero-drift current sense amplifier with 50 µV max input offset voltage and 0.02 µA bias current, featuring a shutdown pin for power management. It provides precision high-side current sensing in an 8-pin MSOP package with wide supply voltage range. Suitable for battery monitoring, power metering, and servo drive current feedback applications.

IC TRANSCEIVER FULL 2/2 20SSOP

LTC4000EUFD-1#PBF is a high-voltage automotive-grade linear battery charger IC from Analog Devices, housed in a compact 28-pin QFN package for thermally efficient designs. It supports versatile battery chemistries and is available in stock with worldwide shipping.

The LTC4444EMS8E#TRPBF is an automotive-grade dual-output high-side and low-side MOSFET gate driver from Analog Devices, sourcing and sinking up to 3 A peak with Schmitt trigger inputs and non-inverting logic. It drives half-bridge configurations in an 8-pin MSOP-EP package. Available from stock worldwide with fast shipping.

LDO Voltage Regulators 3.3V L/Dropout HS 3A Linear Reg

Driver 3A 2-OUT High and Low Side Non-Inv Automotive 8-Pin MSOP EP Tube

Analog Devices LTC4000EGN#PBF is a high voltage, high current battery charger controller IC in a 28-pin SSOP package, supporting wide input voltage range and programmable charge parameters. Ideal for industrial and telecom power systems. Available in stock with worldwide shipping.

The LTC6952IUKG#PBF is an ultralow-jitter multi-output clock synthesizer and distribution IC from Analog Devices supporting output clock frequencies up to 4500MHz. It is housed in a 52-lead QFN (VQFCC) package with an exposed heat slug for thermal management. Suited for demanding high-speed data converter and wireless infrastructure timing applications with worldwide shipping.

Supervisory Circuits Triple uPower Supervisor

Analog Devices LTC6810HG-1#3ZZPBF is a 6-channel Generation 4 multicell battery monitor with daisy-chain interface in a 44-pin SSOP package, delivering high-accuracy cell voltage measurement for lithium-ion battery management systems. From $1.00 in stock with worldwide shipping.

Operational Amplifiers - Op Amps High-Output-Drive, 10MHz, 10V/ us, Rail-to-Rail I/O Op Amps with Shutdown in SC70

LTC6102HMS8#PBF Analog Devices, Current Sense Amplifier Single 8-Pin MSOP

LT1636CMS8#PBF is an Analog Devices Over-The-Top rail-to-rail input and output precision operational amplifier featuring a common-mode rejection ratio of up to 103 dB and maximum input offset voltage of 850 µV. It supports input voltages above the positive supply rail, enabling high-side sensing and single-supply operation from a negative supply without additional circuitry. Available in an 8-pin MSOP package for compact signal conditioning designs.

The LTC1412IG#PBF is a 12-bit successive approximation ADC with 3 Msps throughput and ±2.5V differential input range in a 28-pin SOIC package. It features low linearity error of 0.0244% and a fast 0.283 µs conversion time for high-speed signal acquisition. Available in stock with worldwide shipping.

The LT4275BIMS#TRPBF from Analog Devices is an IEEE 802.3at PoE+ Powered Device (PD) controller IC in an 8-pin MSOP package, rated for industrial temperature operation and 260°C peak reflow compatibility. It manages the full PoE PD detection, classification, and inrush current limiting to simplify IEEE 802.3at-compliant powered device design. Available in tape-and-reel, lead-free PBF format from authorized global distributors.

Operational Amplifiers - Op Amps uP, Over-The-Top SOT-23, R2R In & Out Op

LDO Regulator Pos 5V 0.05A Automotive 8-Pin MSOP EP

LTC1754ES6-3.3#TRMPBF is a switched-capacitor charge pump voltage regulator from Analog Devices that generates a fixed 3.3 V output from a 2 V to 4.4 V input with integrated shutdown control. Operating without inductors, it simplifies PCB design for portable battery-powered applications needing a regulated voltage rail. Available in a compact 6-pin SOT-23 package for minimal board footprint.

Switching Voltage Regulators 2A, 2MHz Synchronous Step-Up DC/DC Converter in 2mm x 3mm DFN Package