Analog Devices

Bidirectional Current Sense Amplifier with PWM-Rejection

ESD-Protected X, Y, Z and X_, Y_, Z_ Pins • ±15kV (Human Body Model) • ±12kV (IEC 1000-4-2, Air-Gap Discharge) • ±8kV (IEC 1000-4-2, Contact Discharge) ● Pin-Compatible with Industry-Standard • 74HC4051/74HC4052/74HC4053 ● Guaranteed On-Resistance • 220Ω with Single +5V Supply • 160Ω with ±5V Supply ● RON Match Between Channels: 2Ω (typ) ● Guaranteed Low leakage Currents ● 1nA Off-Leakage (at +25°C) ● 1nA On-Leakage (at +25°C) • TTL-Compatible Inputs with +5V/±5V Supplies • Low Distortion: < 0

Operational Amplifiers - Op Amps SOT23, Micropower, Single-Supply, Rail-to-Rail I/O Op Amps

MAXIM INTEGRATED PRODUCTS - MAX6425UK29+T - MPU SUPERVISOR, 5.5V, SOT-23-5 U5+2

The LTC2879XMS8E#TRPBF is an EIA-485/EIA-422 compliant differential line transceiver IC in an 8-pin MSOP package for robust industrial serial communication. It features a differential Schmitt trigger receiver and supports half-duplex RS-485 bus topologies with a single driver and receiver function. Available on tape and reel with worldwide shipping.

METAL CAN, TO-46, 4 PIN

Analog Devices LT3045IMSE#PBF is a high-performance adjustable linear LDO voltage regulator delivering up to 500 mA output current with an ultralow noise floor and ultrahigh PSRR, rated for input voltages up to 20 V and a typical dropout voltage of 0.22 V. Packaged in a compact 12-lead MSOP, it achieves 0.0033% maximum load regulation. Globally stocked for RF, precision analog, and noise-sensitive power supply applications in communications and instrumentation.

Analog Devices LTC7800HUDC#PBF is a high-frequency synchronous buck controller operating from 4V to 60V input and supporting switching frequencies up to 2 MHz. It uses current-mode PWM control with fast transient response and is housed in a 20-lead QFN package for compact, thermally efficient power stage designs.

Power Switch ICs - POE / LAN IEEE802.3 af High Efficiency Powered Device with dc/dc converter

Supervisory Circuits Basic Push Button On/Off Controller (Adjustable Off and Kill Timers)

Switching Voltage Regulators IEEE802.3 af High Efficiency Powered Device with dc/dc converter

LT6023IMS8#PBF is a dual micropower precision op-amp from Analog Devices with only 20 µA supply current per amplifier and 1 V/µs slew rate in an 8-pin MSOP package. It provides 125 dB CMRR and 175 µV maximum input offset voltage for precision signal conditioning in power-constrained designs. Available from stock with worldwide shipping.

RS-422/RS-485 Interface IC 60V Fault Tolerant RS485/RS422 Transceiver with Operation to 175C

Current & Power Monitors & Regulators >> MAX17612A: 4.5V to 60V, 200mA Overvoltage, Overcurrent Protector with Reverse Protection and UVLO/OV

The LT6023IMS8#TRPBF is a dual micropower precision operational amplifier from Analog Devices in an 8-pin MSOP package, drawing only 20 µA supply current per amplifier. It achieves a 175 µV maximum input offset voltage, 125 dB CMRR, 3 pA maximum bias current, and a 1 V/µs slew rate for demanding low-power precision applications. Available from authorized distributors in tape-and-reel packaging with worldwide shipping.

Analog Comparators Quad Comparator / Reference

Analog Devices LT8315IFE#PBF is a 560 V input micropower no-opto isolated flyback converter IC with an integrated 630 V, 300 mA switch in a 16-pin SOIC package, enabling optocoupler-free isolated power designs from 9.5 V to 40 V input.

The Analog Devices LT6023HMS8#PBF is a dual precision automotive op-amp with rail-to-rail output, ±15 V / 30 V supply, 125 dB CMRR, and 175 µV maximum input offset voltage in an 8-pin MSOP package. Suited for instrumentation and signal conditioning in automotive systems. Available in stock with worldwide shipping.

LDO Regulator Pos 3.8V to 20V 0.3A 8-Pin MSOP

IC RESET MPU LOW PWR SOT143-4

Analog Devices MAX40009ANT+ is a micropower single voltage comparator with push-pull output and 0.14 µA maximum bias current in a tiny 6-ball WLP package. It suits space-critical and energy-sensitive applications requiring threshold detection. Available in lead-free wafer-level packaging for compact wearable and IoT designs worldwide.

Analog Devices LTC1326IMS8#PBF is a precision triple supply monitor IC with 3 voltage supervisor channels, 4.725 V reset threshold, and a manual push-button reset input in an 8-pin MSOP package. Ideal for multi-rail embedded systems. Available worldwide with fast shipping.

The Analog Devices LT3061EMS8E-5#PBF is a 45 V input, 100 mA micropower low-dropout linear regulator fixed at 5 V output with ultra-low noise and an active output discharge feature. It achieves a 0.25 V typical dropout voltage at 100 mA and operates from 5.6 V to 45 V input for high-voltage industrial rails. Available in MSOP-8 package with worldwide stock and competitive pricing.

LTC5509ESC6#TRMPBF is an Analog Devices RF power detector covering 300 MHz to 3 GHz, housed in a compact 6-pin SOT23 package. It delivers accurate power detection across a wide dynamic range for wireless communications and test equipment designs.

Analog Devices LTC1326IMS8-2.5#PBF is a precision triple supply monitor with a 2.363V reset threshold and manual push-button reset input, supervising 3 channels in an 8-pin SOIC package. Available from stock with worldwide shipping.

The LTC5509ESC6#TRPBF is a wideband RF power detector from Analog Devices covering 300 MHz to 3000 MHz with a 6 dBm input range in a compact SC-70 6-pin package. It delivers accurate received signal strength indication (RSSI) output for wireless systems. Available from stock worldwide with fast shipping.

Analog Devices LT1463CS#PBF is a quad JFET-input operational amplifier with ultra-low 0.00075 µA average bias current, 40 µA per amplifier supply current, and 72 dB minimum CMRR in a 14-pin SOIC package. Pico-amp input bias current suits precision signal conditioning and high-impedance sensor interfaces. Available from stock with worldwide shipping.

Power Management Specialized - PMIC USB Charger Detection IC

Supervisory Circuits uP Precision Triple Supply Monitor

Digital Isolators 5kV 2-Ch Isolator w/ Int DC/DC Converter

Improved Precision Micropower Shunt Voltage Reference with Multiple Reverse Breakdown Voltages

Multiplexer Switch ICs 16-Channel Dual 8 Channel, Low Leakage, CMOS Analog Multiplexers

High Speed Operational Amplifiers QUAD 180HMZ R-TO-R V-FDBK

Accelerometers Low Noise 50kHz +100g 1-axis accel

LDO Voltage Regulators 150mA LDO 2.8Vout

RF MODULATOR, 44 Pin, Plastic, PLCC

Analog Devices LTC4162EUFD-SAD#PBF is a 35 V, 3.2 A multi-cell Li-Ion step-down battery charger with PowerPath management and I2C telemetry, housed in a 28-pin QFN package.

The Analog Devices LT3485EDD-0#TRPBF is a photoflash capacitor charger IC with integrated IGBT gate drive, output voltage monitoring, and a 10-lead thin MSOP package with exposed heat-sink slug. It delivers high-efficiency boost conversion from a single-cell lithium or AA battery to the 300 V+ charge voltages required by xenon flash lamps in digital cameras and portable imaging systems.

LDO Voltage Regulators Ultralow Quiescent Crnt 150mA CMOS

LDO Voltage Regulators 150mA LDO 2.7Vout

Supervisory Circuits 4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

MAXIM INTEGRATED PRODUCTS - MAX397CAI+ - Analog Multiplexer/Demultiplexer, 8:1, 2 Circuits, 100 ohm, 2.7V to 16V, ± 2.7V to ± 8V, SSOP-28

Analog Switch ICs Serially Controlled, Low-Voltage, 8-Channel SPST Switch

Battery Management Single-Cell NiMH Charger

Operational Amplifiers - Op Amps UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

MAXIM INTEGRATED PRODUCTS - MAX395CAG+ - ANALOGUE SWITCH, 8-CH, SSOP-24

Analog Devices LT3663IMS8E-3.3#PBF is a fixed 3.3 V output, 1.2 A step-down DC-DC converter accepting 7.5 V to 36 V input, housed in an 8-pin MSOP EP package with automotive qualification. It uses constant-frequency current-mode control for stable, low-noise regulation suitable for 12 V and 24 V automotive rails. Available in tube packaging from global authorized distributors for prototype and production builds.

Analog Devices LTC2662IUH-16#TRPBF is a 5-channel 16-bit current-source DAC with serial binary input and a -5 V to +5 V output voltage range, housed in a 32-pin QFN package for precision multi-channel analog output systems.

Board Mount Temperature Sensors A +/- 1A C Fail-Safe Remote/Local Temperature Sensors with SMBus Interface

Analog Devices LTC2662HUH-16#PBF is a 5-channel 16-bit/12-bit precision current-source DAC with a serial SPI binary interface and ±5 V analog output range in a 32-pin QFN package. Each channel independently sources or sinks programmable current for multichannel process control and instrumentation. Available in global stock with worldwide shipping for demanding analog output applications.