Analog Devices

The Analog Devices LTC3124EDHC#PBF is a 2-phase synchronous step-up DC/DC converter delivering up to 5 A output at 15 V from an input range of 0.5 V to 5.5 V with output disconnect. It uses current-mode PWM control for stable regulation. Available from stock with worldwide shipping.

Analog Devices MAX22192ARC+ is an integrated circuit for electronic assemblies. It is specified around 70 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

Analog Devices LTC3388IMSE-3#PBF is a high-efficiency step-down switching regulator with 2.7 V to 20 V input range and 50 mA output current, delivering sub-1 µA quiescent current for ultra-low-power systems. Hysteretic current-mode control in a small outline package enables minimal external component count. Available from stock worldwide with competitive pricing.

Analog Devices LT1807CMS8#PBF is a dual general-purpose rail-to-rail input/output operational amplifier in an 8-pin MSOP package, rated for ±6.3 V (12.6 V single supply) automotive-grade operation. Features 100 dB typical CMRR and voltage-feedback architecture for precision signal conditioning. Available from authorized distributors with worldwide shipping.

LDO Voltage Regulators 700mA Micropower Low Dropout Regulator with Shutdown

MAXIM INTEGRATED PRODUCTS - MAX6355TZUT+T - MPU SUPERVISOR/MONITOR, -40 TO 85DEG C

Operational Amplifiers - Op Amps Quad Low-noise, low bias current op amp

The LT1807CMS8#TRPBF is a dual general-purpose rail-to-rail input/output op-amp from Analog Devices with ±6.3V supply range. It features 100dB typical CMRR, 4µA bias current, and frequency compensation for stability. Housed in an 8-pin MSOP package, it meets automotive grade requirements.

Op Amp Dual GP R-R I/O ±6.3V/12.6V Automotive 8-Pin MSOP Tube

LDO Regulator Pos 5V 0.05A Automotive 8-Pin MSOP EP T/R

LDO Regulator Pos 1.275V to 60V 0.05A Automotive 8-Pin MSOP EP T/R

Analog Devices LTC2947IUHF-65#PBF is a high-current power and energy monitor capable of measuring currents up to 65A with integrated voltage, charge, and energy accumulation. It features an I2C/SPI interface and adjustable alert thresholds in a 38-lead QFN package, suitable for industrial and server power monitoring applications requiring precision telemetry.

IC CURRENT MONITOR(12BIT) 10MSOP

LCD Drivers 28V Int Switch LCD Bias Supply

The LTC1968IMS8#TRPBF is a precision micro-power RMS-to-DC converter from Analog Devices with 0.15% linearity error and up to 15 MHz input bandwidth, packaged in an 8-pin MSOP for compact power measurement designs.

IC OPAMP GP 2 CIRCUIT 8TDFN

Analog Devices LTC1968IMS8 is a true RMS-to-DC converter in an 8-pin MSOP package with 1.05 V output and 2700 µA supply current. It achieves 0.15% maximum linearity error for accurate power measurement across complex waveforms. Suitable for power monitors, multimeters, and AC signal measurement circuits in industrial and test-and-measurement equipment.

High Speed Operational Amplifiers Triple 1.5GHz

Our Stock

CAN Interface IC 5V CAN with High FP, CMR, and ESD with Silent Mode

Power Management Specialised - PMIC Prec. uPower RMS to DC converter

Analog Devices LTC2254CUH#PBF is a 14-bit, 105 Msps low-power ADC operating from a 3 V supply, designed for high-speed single-channel analog-to-digital conversion. It features a ±1 V analog input range and a QFN-32 package for compact PCB integration. Suited for communications receivers and instrumentation requiring fast, accurate digitization.

♦ On-Resistance 4Ω max at 5V 7Ω max at 3V ♦ On-Resistance Flatness 0.8Ω max at 5V 2.5Ω max at 3V ♦ On-Resistance Matching 0.2Ω max (+2.7V to +5.5V) ♦ +1.8V to +5.5V Single-Supply Voltage ♦ +1.8V Operation On-Resistance 30Ω (typ) Over Temperature tON 20ns typ, tOFF 12ns (typ) ♦ TTL/CMOS-Logic Compatible ♦ Crosstalk -100dB at 1MHz ♦ Off-Isolation -75dB at 1MHz ♦ Rail-to-Rail Signal Range

Analogue Switch ICs Low-Voltage, 4 Ohm, Quad, SPST, CMOS Analog Switches

12 Channel Multicell Battery Monitor with Addressable Interface, Generaion 1

Analog Devices LTC7124EUDD#TRPBF is a dual 3.5A synchronous step-down regulator with ultralow quiescent current, supporting input voltages from 3.1V to 17V with current-mode control and burst mode for high efficiency at light loads.

MAXIM INTEGRATED PRODUCTS - MAX4651EUE+ - Analogue Switch, Low Voltage, 4 Channels, SPST - NC, 7 ohm, 1.8V to 5.5V, TSSOP, 16 Pins

Analog Switch ICs 4Ohm Dual SPST CMOS Analog Switch

LTM4626EY#PBF is an Analog Devices µModule DC-DC step-down switching regulator integrating inductor, controller, and FETs in a single BGA package. It accepts 3.1 V to 20 V input and produces adjustable output from 0.6 V to 5.5 V using current-mode PWM control for efficient point-of-load power conversion. Available from stock with worldwide shipping.

LTC6811HG-1 is a 12-channel multicell battery stack monitor IC from Analog Devices with daisy-chain interface for high-voltage battery management systems. Supports up to 12 cells per device with 16-bit ADC measurement accuracy. Available in SSOP-44 package with -40°C to 125°C operating range.

The LT3008IDC-3.3#TRPBF is a fixed 3.3 V LDO linear regulator from Analog Devices with a wide 2 V to 45 V input range, 20 mA output current, and 300 mV typical dropout voltage in a 6-pin DFN package. Automotive-grade with a maximum absolute input of 50 V for transient protection. Available in tape-and-reel for automated assembly.

MAXIM INTEGRATED PRODUCTS - MAX3521ETP+ - UPSTREAM AMPLIFIER, DOCSIS 3.0, TQFN-20

MAXIM INTEGRATED PRODUCTS - MAX351ESE+ - Analogue Switch, SPST, 4 Channels, 35ohm, 10V to 30V, ± 4.5V to ± 20V, NSOIC-16

Gate Drivers

Analog Devices LTM4638EY#PBF is a µModule DC/DC step-down power regulator with 3.1 V to 20 V input range, current-mode PWM control, and BGA package, designed for high-density, high-efficiency point-of-load power conversion in space-constrained applications.

Analog Devices LTC2914IGN-1#PBF is a quad under/overvoltage supervisor IC with 4 independent monitoring channels in a 16-pin SSOP package, offering adjustable thresholds for precise power supply sequencing and fault detection in industrial systems.

Supervisory Circuits Push Button On/Off Controller with U Interrupt for Menu Driven Applications

LT1339ISW#PBF is a high-power synchronous DC/DC controller IC from Analog Devices supporting current-mode PWM control with 10 V to 15 V input voltage range. It drives external N-channel MOSFETs for synchronous buck conversion, enabling high-efficiency power delivery for demanding loads. Housed in a 20-pin SOIC package, it is suited for telecom, industrial, and server power supply designs.

IC SUPERVISOR 4 CHANNEL 36SSOP

LINEAR TECHNOLOGY - LTC2928IUHF#PBF - Power Supply Sequencer and Supervisor, Active-Low Reset, 4-Monitors, 2.9V-16.5Vin, QFN-38

Analog Devices LTC2928CUHF#PBF is a power supply sequencer and supervisor IC monitoring 4 voltage rails from 2.9 V to 16.5 V input with active-low reset output in a QFN-38 package. Provides programmable sequencing, adjustable thresholds, and voltage-mode control for complex multi-rail systems. Available in RoHS-compliant format with worldwide stock and competitive pricing.

Analog Devices MAX17244ETERB+ is a current-mode PWM step-down switching regulator with a 3.5V to 36V input range and 2.5A output current. It delivers an adjustable output voltage up to 10V in a compact 16-pin TQFN package. Ideal for industrial and automotive point-of-load power conversion designs.

Programmable Oscillators 3.3V Spread-Spectrum EconOscillator

Improved Precision Micropower Shunt Voltage Reference with Multiple Reverse Breakdown Voltages

The LTC6560HUD#PBF is an Analog Devices high-speed transimpedance amplifier (TIA) in a 16-pin QFN package, optimized for converting photodiode current to voltage in optical receiver front-ends. It delivers wide bandwidth and low noise for LIDAR, optical fiber, and time-of-flight distance measurement applications.

The LTC6560IUD#PBF by Analog Devices is a high-speed transimpedance amplifier (TIA) in a compact 16-lead QFN package with an exposed heat-sink slug for thermal management. It converts photodiode current to voltage with high bandwidth and low noise, making it ideal for optical receivers, LIDAR systems, and high-speed light detection applications.

IC RTC CLK/CALENDAR PAR 24-EDIP

Switching Controllers Wide Vin Range, Low Noise, 250mA Buck-Boost Charge Pump

The LT6203HMS8#PBF is an Analog Devices dual low-noise rail-to-rail I/O operational amplifier in an 8-pin MSOP package, supporting ±6.3 V (12.6 V single supply) with 95 dB typical CMRR and 4 µA maximum bias current. Designed for precision signal conditioning in automotive and industrial applications.

LED Lighting Drivers High-Voltage, 100mA/200mA Adjustable Linear High-Brightness LED Drivers with PWM Dimming