Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
11,416
Total Products
25
Categories
All Analog Devices Components
Showing 2,651–2,700 of 11,416
Switching Voltage Regulators Dual 15A or Single 30A DC/DC uModule Regulator
Switching Voltage Regulators 3A 2MHz Step-Down Regulator w/Switch
Digital to Analog Converters - DAC
Silicon Oscillator 5MHz/ 2.5MHz/ 1.25MHz/ 0.625MHz/ 0.312MHz/ 0.078MHz/ 0.039MHz- 0.032768MHz to 8.1
2.7V to 18V Input, Boost Converter with 0.1uA True Shutdown, Short Circuit Protection and Selectable Input Current Limit
LDO Voltage Regulators 20V 200mA LDO 1.8Vo
Battery Management I2C Prog Linear Battery Charger
Switching Voltage Regulators CMOS Micropower Step-Up Switching Regulator
RF Amplifier 1:4 Single Ended Active RF Splitter
Conv DC-DC 3V to 25V Step Down Single-Out 3.3V 1.5A 8-Pin MSOP T/R
Analog to Digital Converters - ADC 24-Bit Power Delta-Sigma ADC
Op Amp, SOP-8,
Switching Voltage Regulators High Efficiency, 140V 400mA Step-Down Regulator
Battery Management High Voltage 2 Amp Monolithic Li-Ion Battery Charger
Security ICs / Authentication ICs PUF ENABLED SHA-3 Secure Authenticator
Processor Supervisor 3.085V/4.675V/Adj 3 Active Low/Open Drain Automotive 8-Pin MSOP
6 DOF PREC IMU, 40G (500 DPS D
SP Amp Current Sense Amp Single 60V Automotive 8-Pin MSOP
Analog Devices SSM2404PZ is a quad SPST analog switch IC optimized for audio applications with ultra-low signal distortion, supporting dual supply voltages from ±5.5 V to ±12 V. It integrates four independent normally-open switches in a 20-pin PDIP package for audio signal routing and mixing. Available RoHS-compliant with worldwide distribution and fast shipping.
LDO Voltage Regulators 3uA Iq, 20mA Low Dropout Linear Regulators
Switching Controllers Low IQ, 60V, High Frequency Synchronous Step-Down Controller
Digital to Analog Converters - DAC 16-Bit SPI Octal DAC (1.25V Reference, 12LSB INL)
Switching Voltage Regulators 125mA, Frequency-Selectable, Switched-Capacitor Voltage Converters
Conv DC-DC 2.65V to 10V Synchronous Step Down Single-Out 0.8V to 10V 0.6A 8-Pin MSOP Tube
Analog Devices LTM4642EY#PBF is a high-density µModule step-down DC/DC regulator delivering up to 4 A output with adjustable 0.6 V to 5.5 V output from a 2.375 V to 20 V input using current-mode PWM control. It integrates inductor, MOSFETs, and controller in a compact 11.25 mm × 9 mm × 4.92 mm BGA-56 package. Available from stock worldwide.
The LTC6957HMS-4#PBF is a dual-output, low phase noise clock buffer and logic level converter from Analog Devices, featuring complementary CMOS outputs and differential input conditioning. It supports low skew clock distribution in precision timing applications. Available in a compact 12-lead MSOP package with RoHS-compliant, lead-free construction.
Clock Buffer Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with Complementary CMOS Outputs
5 kVrms/3 kV rms signal and power isolated CAN transceivers isoPower integrated isolated dc-to-dc converter VIO pin for 1.7 V to 5.5 V logic levels ISO 11898-2:2016 compliant (CAN FD) Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 150 ns Extended common-mode range: ±25 V Bus fault protection: ±40 V on CANH and CANL pins Low power standby support remote wake request Extra isolated signal for control (such as termination switches) Passes EN 55022 Class B by 6 dB Slope contr
5 kVrms/3 kV rms signal and power isolated CAN transceivers isoPower integrated isolated dc-to-dc converter VIO pin for 1.7 V to 5.5 V logic levels ISO 11898-2:2016 compliant (CAN FD) Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 150 ns Extended common-mode range: ±25 V Bus fault protection: ±40 V on CANH and CANL pins Low power standby support remote wake request Extra isolated signal for control (such as termination switches) Passes EN 55022 Class B by 6 dB Slope contr
Battery Management 1-Cell or 2-Cell Stand-Alone Fuel Gauge IC
Analog Devices LTC6256CMS8#TRPBF is a dual precision rail-to-rail input/output op-amp with 6.5 MHz bandwidth and ultra-low supply current of 65 µA per amplifier, packaged in an MSOP-8. From $2.80 in stock with worldwide shipping.
Sensor Interface Dual Driver IO-Link Device Transceiver with EMC Protection and DC/DC
Switching Voltage Regulators 8A, 4MHz, Mono Sync Buck Reg
The LTC1992-1IMS8 is a single fully differential amplifier with rail-to-rail output, featuring ±5.5 V / 11 V supply range, 60 dB CMRR, and 2500 µV max offset voltage, in an 8-pin MSOP package for automotive and industrial applications.
Surge Suppressors 100V OV, UV, OC and Reverse Supply Protection Controller with -50mV Reverse Threshold
RS-232 Interface IC +/-15kV ESD-Protected, 1 uA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers with AutoShutdown
● Ideal for Safety Camera Applications • Works with Low-Cost 50Ω Coax (100Ω STP) Cables • Error Detection of Video/Control Data • High-Immunity Mode for Robust Control-Channel EMC Tolerance • Retransmission of Control Data Upon Error Detection • Best-in-Class Supply Current: 93mA (max) • Pre/Deemphasis Allows 15m Cable at Full Speed • 32-Pin (5mm x 5mm) TQFN Package with 0.5mm Lead Pitch ● High-Speed Data Serialization for Megapixel Cameras • Up to 1.74Gbps Serial-Bit Rate • 12.5MHz to 87MHz x
Power Management Specialized - PMIC Next generation AP PMIC
Switching Voltage Regulators 2A Step-Down Switching Reg
Switching Voltage Regulators High-Efficiency Step-Up Converters with Reverse Battery Protection
ADI Low Cost DDS IC.
ADG719BRTZ-R2 is a Analog Devices ADG719BRTZ-R2, Analogue SPDT Switch Single SPDT, 3 V, 5 V, 6-Pin SOT-23 for electronic system designs. Key details include 6 pins in SOT23 (6-Pin) from Analog Devices. It supports industrial electronics, embedded systems, instrumentation, maintenance repair, and production sourcing programs with worldwide sourcing support.
400MHz to 3.7GHz High Signal Level Downconverting Mixer
LT3581IDE#PBF is a 3 A boost and inverting DC/DC converter from Analog Devices with built-in fault protection, current-mode PWM control, and an input voltage range of 2.5 V to 22 V. It also operates as an LDO regulator. Available in a compact 8-lead small-outline no-lead package.
LT8570IMS8E-1#PBF is a versatile DC-DC converter from Analog Devices operating from 2.55 V to 40 V input, configurable as a boost, SEPIC, or inverting converter with 65 V output capability and 0.25 A switch current. Available in a compact 8-pin MSOP package with worldwide shipping.
Supervisory Circuits ICLV MonitrReset Watchdog ULP SupvCkt
LVDS Interface IC 1:10 LVDS CLOCK DRIVER IC.
LT8570IMS8E#TRPBF is a current-mode PWM boost, SEPIC, and inverting DC/DC converter from Analog Devices with a 65V internal switch and 2.55V to 40V input range in an MSOP-8 package. Integrated soft-start and synchronization support flexible multi-rail power supply designs. Available from authorized distributors with worldwide shipping.
EEPROM, 1KX1, Serial, Cmos, PDSO6, 0.150 Inch, Rohs Compliant, TSOC-6
DC/DC Cntrlr Single-OUT Flyback/Step Up 1000kHz Automotive 10-Pin MSOP EP T/R
Need Analog Devices Components?
Get competitive quotes from authorized China distributors
Request a Quote