LT1807CMS8#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices LT1807CMS8#PBF is a dual general-purpose rail-to-rail input/output operational amplifier in an 8-pin MSOP package, rated for ±6.3 V (12.6 V single supply) automotive-grade operation. Features 100 dB typical CMRR and voltage-feedback architecture for precision signal conditioning. Available from authorized distributors with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- LT1807CMS8#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $5.1100(MOQ 19)
- Temp Range
- ?°C to 70.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of LT1807CMS8#PBF?
- Dual rail-to-rail input and output op-amp supporting supply voltages from 2.7 V single supply up to ±6.3 V (12.6 V total) for flexible power architecture
- 100 dB typical common-mode rejection ratio enabling accurate differential signal conditioning in the presence of ground noise
- Automotive-grade qualification with 4 µA maximum bias current at 25°C for low-error precision sensor interface circuits
- Compact 8-pin MSOP package allowing dual-channel amplifier placement in space-constrained automotive and industrial PCBs
What is LT1807CMS8#PBF used for?
The LT1807CMS8#PBF is designed for precision analog signal conditioning in automotive sensor interfaces, battery management systems, and industrial measurement circuits where rail-to-rail I/O swing and wide supply range are essential. Its dual op-amp configuration is ideal for differential amplifier stages, active filter sections, and instrumentation front-ends operating from a single 5 V or dual ±5 V supply. The 100 dB CMRR and voltage-feedback architecture make it well-suited for strain gauge bridges, thermocouple amplifiers, and current sensing circuits requiring sub-millivolt accuracy.
What are the specifications of LT1807CMS8#PBF?
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1660 |
| YTEOL | 9 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 6 µA |
| Bias Current-Max (IIB) @25C | 4 µA |
| Common-mode Reject Ratio-Min | 79dB |
| Common-mode Reject Ratio-Nom | 100dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 800 µV |
| JESD-30 Code | S-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | NO |
| Low-Offset | YES |
| Micropower | NO |
| Neg Supply Voltage Limit-Max | -6.3 V |
| Neg Supply Voltage-Nom (Vsup) | -5 V |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP8,.19 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 120V/us |
| Supply Current-Max | 13mA |
| Supply Voltage Limit-Max | 6.3V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Temperature Grade | COMMERCIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Unity Gain BW-Nom | 300000 |
| Voltage Gain-Min | 60000 |
| Wideband | YES |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia |
Where can I find the LT1807CMS8#PBF datasheet?
LT1807CMS8#PBF Datasheet DownloadOfficial datasheet from Analog Devices
What are equivalent replacements for LT1807CMS8#PBF?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What supply voltage range and output swing does the LT1807CMS8#PBF support for automotive sensor circuits?
The LT1807CMS8#PBF operates on single supplies from 2.7 V to 12.6 V or dual supplies up to ±6.3 V, with rail-to-rail output swing within approximately 50 mV of each supply rail at light loads. This wide range allows the same op-amp to operate in both 3.3 V digital-supply circuits and 12 V automotive battery-referenced signal conditioning stages without redesign.
How does the 100 dB CMRR of the LT1807CMS8#PBF benefit differential measurement in automotive environments?
A 100 dB common-mode rejection ratio means the LT1807CMS8#PBF attenuates common-mode interference by a factor of 100,000, so a 1 V common-mode noise spike on the input lines produces only 10 µV of output error. This is critical in automotive environments where ground loops and alternator noise at 14 V can induce tens of millivolts of common-mode interference on unshielded sensor wiring.
Can the LT1807CMS8#PBF be used as a single-supply instrumentation amplifier front-end, and what input bias current must be considered?
Yes, the LT1807CMS8#PBF can configure both op-amps in a 3-op-amp instrumentation topology from a single 5 V supply. Designers must account for the 4 µA maximum bias current at 25°C when selecting feedback resistors; using values above 100 kohm will introduce offset errors above 0.4 mV, so resistor values below 50 kohm are recommended to keep bias-current-induced offset below 0.2 mV in precision measurement designs.
How does the LT1807CMS8#PBF in MSOP compare to SOIC-8 dual op-amps for space-constrained PCB layouts?
The 8-pin MSOP package measures approximately 3.0 mm x 3.0 mm, which is roughly 50% smaller in footprint than a standard 8-pin SOIC (4.9 mm x 3.9 mm). For a dual op-amp handling two sensor channels, this size reduction allows the LT1807CMS8#PBF to fit in automotive ECU PCBs where connector density and board dimensions are constrained to under 60 mm x 40 mm.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
LT3062EDCB#TRPBF
Small Outline No-lead
Integrated Circuit
LT3062EDCB#TRMPBF
Small Outline No-lead
Integrated Circuit
LT8641IUDC#TRPBF
Other
Integrated Circuit
HMC412AMS8GTR
Small Outline Packages
Integrated Circuit
LT3062HMS8E#PBF
Small Outline Packages
Integrated Circuit
LT3062IMS8E#PBF
Small Outline Packages
Integrated Circuit
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 19+ | $6.7700 | $128.63 |
| 100+ | $5.8881 | $588.81 |
| 250+ | $5.5500 | $1387.50 |
| 1000+ | $5.1100 | $5110.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit