Analog Devices

Phase Detectors / Shifters Analog Phase Shifter 1-2 GHz

Resistor Networks & Arrays Matched Resistor Network, Dual 10k/100k

MAXIM INTEGRATED PRODUCTS - MAX6357LSUT+T - Supervisor, Manual, Active-Low, Push-Pull, 3 Monitors, 1 V to 5.5 V supply, 180 ms delay, SOT-23-6

Analog to Digital Converters - ADC 16-bit, 65Msps ADC

Switching Voltage Regulators 36VIN, 5A Module Regulator with 5-Output Configurable LDO Array

High-efficiency adjustable buck switching regulator from Analog Devices with 8 A output current and 3.4 V to 65 V wide input range in a 32-pin LQF package. Current-mode PWM control ensures fast transient response. Available with worldwide shipping.

The LTC2855CGN#TRPBF is a 3.3V full-duplex RS-422/RS-485 line transceiver IC with integrated termination, supporting data rates up to 20 Mbps. It features differential Schmitt trigger inputs and is designed for robust industrial serial communications. Available in a 16-pin SSOP package for space-constrained designs.

±15kV ESD-Protected, +5V RS-232 Transceivers

LDO Voltage Regulators 800mA Single Resistor Rugged Linear Regulator with Monitors

The LTC2605CGN#PBF is an octal 16-bit DAC with I2C interface from Analog Devices, featuring R-2R ladder architecture, rail-to-rail output, and 5.5 V supply operation. It delivers 16-bit resolution across 8 independent channels in a compact 16-lead SSOP package, ideal for precision analog signal generation in industrial and instrumentation applications.

Multiplexer Switch ICs 8:1 Low Voltage Analog MUX

Analog Devices LTC2605IGN#PBF is an 8-channel, 16-bit DAC in a 16-pin SSOP package with a serial SPI interface and rail-to-rail output up to 5.5 V. It offers excellent linearity suitable for precision analog signal generation in instrumentation. Ideal for programmable power supplies, automatic test equipment, and industrial process control needing accurate multichannel voltage output.

10-bit successive approximation ADC from Analog Devices sampling at up to 500 ksps with differential input support and 1.4 µs conversion time in an 8-pin MSOP package. Low-power design for portable and battery-operated data acquisition. Available worldwide.

The LT1997IDF-1#PBF is a single rail-to-rail output difference amplifier from Analog Devices with ±25V supply range and 96dB typical CMRR. It features ultra-low 5nA bias current and automotive-grade qualification in a compact 12-pin DFN EP package. Ideal for precision differential signal acquisition in high-voltage industrial systems.

Multiplexer Switch ICs 4:1 2Ch Low Voltage Analog MUX

Analog Devices LTC1197LCMS8#PBF is a 10-bit successive approximation ADC sampling at up to 250 ksps with differential input range of -0.05 V to 2.75 V on a 3 V single supply. It achieves a maximum conversion time of 2.9 µs and is housed in a compact 8-pin MSOP package with RoHS-compliant lead-free construction.

MAX16150BWT+ is a Analog Devices integrated circuit for industrial and embedded electronics. It provides 6 pins, -40°C to 125°C, BGA. From RFQ pricing, in-stock sourcing supports worldwide shipping.

Precision Amplifiers Precision, Wide Voltage Range, Difference Amplifier

Video Amplifiers Low Cost CAT5 Driver

The LTC1197LIMS8 is a single-channel 10-bit successive-approximation ADC sampling at up to 250 ksps with a serial SPI interface, housed in a compact 8-pin MSOP package. It accepts 0 V to 5 V analog inputs and completes each conversion in 1.4 µs maximum. Available from stock with worldwide shipping.

2 X 2 MM, ROHS COMPLIANT, PLASTIC, SMT, 6 PIN

LTC1197LIMS8#PBF is a 10-bit successive-approximation ADC from Analog Devices sampling at up to 250 ksps with a differential input range up to 2.75 V on a 3 V supply. It converts in as little as 2.9 µs and comes in an 8-pin MSOP for space-constrained designs.

Analog Devices LTC1197CMS8#PBF is a 10-bit single-channel SAR ADC with 500 ksps maximum throughput rate and a serial SPI interface, housed in a compact 8-pin MSOP package. It accepts analog inputs from -0.05 V to 5.05 V and completes each conversion in 1.4 µs maximum, making it ideal for medium-speed data acquisition applications. Available from stock with worldwide shipping.

Analog Devices LT3060HTS8-3.3#TRMPBF is a 45 V input, 100 mA fixed 3.3 V output LDO linear regulator in SOT-23 8-pin package. Features ultra-low 0.3 V typical dropout voltage, micropower quiescent current, and low output noise. Available on tape and reel for automated assembly in industrial and automotive power supply designs.

Switching Controllers 42V, Dual-Output, Synchronous Step-Down Controller

LT1034 - 2.5V Ref, 40ppm/C Max TC ,IC: voltage reference source; 2.5V; ±1.6%; TO92; 20mA .

Analog Devices LT1952EGN-1#PBF is a current-mode PWM switching controller with synchronization input, supporting input voltages from 6.82 V to 25 V in a 16-pin SSOP package. Designed for single-switch topologies, it offers precise dead-time control and soft-start. Available from stock worldwide for power supply design applications.

The LTC3113IDHD#PBF is a 3A buck-boost DC/DC converter with wide input range from 1.8 V to 5.5 V and low noise voltage-mode PWM control. It delivers regulated output voltage from 1.8 V to 5.5 V even when input crosses output. Available from stock worldwide with competitive pricing.

Analog Devices LTC1864LIMS8 is a 16-bit successive-approximation (SAR) ADC with 2 analog input channels, 150 ksps sample rate, and serial interface in an 8-pin MSOP package rated for automotive environments. It delivers up to 5.25 V analog input range with 0.0092% maximum linearity error and 3.2 µs conversion time for precision data acquisition. Available worldwide in-stock for automotive, industrial, and instrumentation applications.

IC SWITCH QUAD SPST 16SOIC

Op Amp Dual GP R-R I/O ±6.3V/12.6V Automotive 8-Pin MSOP T/R

LDO Regulator Pos 5V 0.05A Automotive 8-Pin MSOP EP T/R

LDO Voltage Regulators 150mA LDO 1.8Vout

♦ On-Resistance 4Ω max at 5V 7Ω max at 3V ♦ On-Resistance Flatness 0.8Ω max at 5V 2.5Ω max at 3V ♦ On-Resistance Matching 0.2Ω max (+2.7V to +5.5V) ♦ +1.8V to +5.5V Single-Supply Voltage ♦ +1.8V Operation On-Resistance 30Ω (typ) Over Temperature tON 20ns typ, tOFF 12ns (typ) ♦ TTL/CMOS-Logic Compatible ♦ Crosstalk -100dB at 1MHz ♦ Off-Isolation -75dB at 1MHz ♦ Rail-to-Rail Signal Range

RS-422/RS-485 Interface IC 15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS-485 Receivers

The DS2780E+T&R is a stand-alone fuel gauge IC from Analog Devices designed for single-cell Li-Ion or Li-Polymer battery management. It measures voltage, temperature, and current to compute accurate state-of-charge via a 1-Wire interface, housed in a compact 8-pin TSSOP package. Available in tape-and-reel for high-volume production with worldwide shipping.

Op Amp Dual Low Noise Amplifier R-R I/O ±6.3V/12.6V Automotive 8-Pin MSOP

Op Amp Dual GP R-R O/P 6V Automotive 8-Pin MSOP T/R

Switching Voltage Regulators 16 uA IQ, 1.2A PWM Step-Down DC-DC Converters

LT1397HDE#PBF is a quad 400 MHz current-feedback operational amplifier from Analog Devices, offering 42 dB minimum common-mode rejection ratio and 12 mV maximum input offset voltage in a compact 14-lead SOIC package. Available in stock with worldwide shipping.

LED Lighting Drivers High-Voltage, 100mA/200mA Adjustable Linear High-Brightness LED Drivers with PWM Dimming

LDO Regulator Pos 1V 5A 16-Pin LFCSP EP T/R

MAX4461TEUT+T from Analog Devices is a integrated circuit for industrial, communications, consumer, and embedded electronic designs. Key specs include 6 pins, SOT23 (6-Pin) package, and Instrumentation Amplifiers OPERATIONAL AMP. From quote pricing, in-stock sourcing support.

Linear Voltage Regulator IC Negative Adjustable 1 Output 1.5A DDPAK-5 , -30 V , -40°C ~ 125°C

Dual 30A or Single 60A µModule Regulator with Digital Power System Management

The LTC3642EMS8E-3.3#PBF is a 4.5V to 45V input synchronous step-down DC-DC converter with 3.3V fixed output at 50mA. It features current-mode burst-mode control for high efficiency in automotive applications. Available in compact 8-pin MSOP package with exposed pad for enhanced thermal performance.

The LT8631EFE is a dual-channel synchronous step-down switching regulator from Analog Devices with two independent 1.5 A outputs and an input voltage range of 2.7 V to 17 V. Operating at up to 2.25 MHz switching frequency in a 16-pin TSSOP package, it delivers high efficiency for compact multi-rail power supplies. Available from stock worldwide with fast shipping.

Power Management Specialized - PMIC 2.5A Supercapacitor Backup Power Manager

Preset/Adjustable Output CMOS Inverting Switching Regulators

76V, High-Side, Current-Sense Amplifiers with Voltage Output