Analog Devices

Maxim MAX836EUS-T, Voltage Supervisor 1.231V max. 4-Pin, SOT-143

Supervisory Circuits Low-Voltage, Quad-/Hex-/Octal-Voltage A P Supervisors in TQFN

IC REG BOOST 5V 2.3A 8SOIC

Analog Comparators uP OpAmp + Comparator

Clock Fanout Buffer 2-OUT 1-IN 1:2 12-Pin MSOP T/R

Supervisory Circuits 3-Pin Microprocessor Reset Circuits

Digital Isolators 4-Channel, Low Power, 5kV Digital Isolators

IC ADC 16BIT SIGMA-DELTA 16TSSOP

Switching Voltage Regulators Low Noise, 1A, 1MHz Push-Pull DC/DC Driver with Duty Cycle Control

Analog Devices AD7755BRS is a high-accuracy single-phase energy metering IC in a 24-pin SSOP package designed for active energy measurement. Features on-chip analog-to-digital conversion and pulse frequency output for watt-hour metering. Available from authorized distributors with worldwide shipping.

CAN Interface IC 5.7kV Isolated CAN-FD Transceiver

Audio Amplifiers Mono/Stereo 1.4W BTL Audio Power Amp

High Speed Operational Amplifiers Quad 100MHz, Low Noise, Low Power OA

LDO Voltage Regulators 800mA Single Resistor Rugged Linear Regulator with Monitors

Current Sense Amplifiers High Voltage, Bidirectional Current Sense Amplifier

MAX3645ESE+ is a Analog Devices integrated circuit for electronic designs. Key specs include 16 pins, Small Outline Packages, and datasheet-backed parameters. From inquiry quote with in stock worldwide shipping support.

8-LEAD PLASTIC SO

Boost Controller with Power Factor Correction

1-Channel Single ADC SAR 1.25Msps 12-bit Parallel 28-Pin SSOP

Comparator Single R-R O/P ±6.3V/12.6V Automotive 8-Pin MSOP T/R

Current Sense Amplifiers High Side current Sense with -03V to 44V Common Mode

Analog Comparators uP OpAmp + Comparator

PACKAGE-16TSSOP

Analog Comparators uP OpAmp + Comparator

Comparator Single R-R O/P ±6.3V/12.6V Automotive 8-Pin MSOP Tube

High Speed Operational Amplifiers Single 400MHz CFA

10A Step-Down DC/DC μModule Regulator

Analog Comparators uP OpAmp + Comparator

HI V SYNC N-CH MOSFET DRVR

Analog Switch ICs Precision, Quad, SPDT, CMOS Analog Switch

HI V SYNC N-CH MOSFET DRVR

HI V SYNC N-CH MOSFET DRVR

Comparator Single R-R O/P ±6.3V/12.6V Automotive 8-Pin MSOP T/R

MAXIM INTEGRATED PRODUCTS - MAX17501AATB+T - Synchronous Buck Step Down Switching Regulator, Fixed, 4.5-60V In, 3.3V/0.5A Out, 600kHz, TDFN-EP-10

Micropower Op Amp, Comparator and Reference

Amplifier, Comparator, Reference IC GSM 8-MSOP

■ Quiescent Current: 5µA Typ ■ Outputs Swing Rail-to-Rail ■ Low Op Amp Offset Voltage: 700µV Max ■ Reference Output Drives 0.01µF Capacitor ■ Internal 1.2V ±0.4% Reference Output (LTC1541) ■ Low Input Bias Current: 1nA Max ■ Reference Output Can Source Up to 2mA ■ Internal ±2.25mV Comparator Hysteresis ■ Comparator and Op Amp Input Range Includes Ground ■ Op Amp Capable of Driving Up to 1000pF Load

Analog Switch ICs 35Ohm SPST/SPDT, +3V Logic-Compatible Analog Switches

The MAX20323CENC+ is a dual-channel USB overvoltage protector IC from Analog Devices, designed for systems requiring protection against USB voltage spikes up to 28 V. Featuring a 12-ball WLCSP package and an operating range of -40°C to +85°C, it integrates two independent protection channels in a compact footprint suitable for space-constrained mobile and portable designs.

■ Quiescent Current: 5µA Typ ■ Outputs Swing Rail-to-Rail ■ Low Op Amp Offset Voltage: 700µV Max ■ Reference Output Drives 0.01µF Capacitor ■ Internal 1.2V ±0.4% Reference Output (LTC1541) ■ Low Input Bias Current: 1nA Max ■ Reference Output Can Source Up to 2mA ■ Internal ±2.25mV Comparator Hysteresis ■ Comparator and Op Amp Input Range Includes Groun

LDO Voltage Regulators 120mA Linear Regulator

MAXIM INTEGRATED PRODUCTS - MAX38640AENT+ - DC/DC Buck (Step Down) Regulator, Adjustable, 1.8V to 5.5V In, 0.5V to 5V/700mA Out, WLP-6

Precision Amplifiers 4x Zero-Drift Op Amps

Serializers & Deserializers - Serdes 10-Bit Bus LVDS Serializer

Power Management Specialized - PMIC USB Type-C CC-Pin Overvoltage Protector

RF Transmitter Current-Sense Amplifier W / PWM Rejection

Use the download button to access the MAX41461GUB+ schematic symbol, PCB footprint, and 3D model.

The MAX38902CANT+ is an ultralow-noise 500 mA adjustable LDO linear regulator from Analog Devices rated at 10.5 VRMS output noise in a 6-ball WLCSP package. It achieves 63 mV typical and 300 mV maximum dropout voltage with 0.06% maximum load regulation. Designed for RF front-ends, precision ADCs, and noise-sensitive analog circuits.

Battery Management USB Compatible Switching Power Manager/LiFePO4 Charger with Overvoltage Protection

Power Management Specialized - PMIC Low-Noise, Low Bias-Current Dual Amplifier