Analog Devices

Switching Voltage Regulators 38V, 2A, 2.4MHz Step-Down Switching Reg in MSOP

Switching Voltage Regulators 38V, 2A, 2.4MHz Step-Down Switching Reg in DFN

Clock Buffer Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with CMOS Outputs

High Speed Operational Amplifiers 165MHz, R2R In & Out, 0.95nV/vHz L N,

Comparator Single ±5.5V/11V 8-Pin MSOP

The LTC6950IUHH#PBF is an ultralow-jitter integer-N PLL clock synthesizer and jitter cleaner with 5 programmable outputs in a 48-pin QFN package, delivering sub-100 fs RMS jitter for high-performance ADC clocking and communications infrastructure equipment.

Quad Matched Resistor Network Automotive 8-Pin MSOP EP Tube

Analog to Digital Converters - ADC 16-bit, 20Msps, 1.8V Low-Power ADC, Parallel Outputs

Analog to Digital Converters - ADC 2x 12-B, 105Msps L Pwr 3V ADC

LDO Voltage Regulators 500mA Micropower VLDO Linear Regulator

Digital to Analog Converters - DAC Temperature-Controlled, Nonvolatile, I C Quad DAC

Switching Voltage Regulators 500kHz 6A Hi Eff Sw Reg

Voltage References Ultra-High-Precision Ultra-Low-Noise

Analog Devices MAX1924VEEE is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 16 pins in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Conv DC-DC 2.55V to 40V Inv/Step Up Single-Out 65V 0.25A 8-Pin MSOP EP Tube

ANALOG DEVICES - ADM8615Y100ACBZ-R7 - VOLTAGE SUPERVISOR, 5.5V, WLCSP-6

Switching Voltage Regulators Boost, Flyback, SEPIC, and Inverting Controller

Linear Technology, LT3845IFE#PBF Step-Down Switching Regulator Adj./Fixed 16-Pin, TSSOP

Switching Voltage Regulators Dual 15A or Single 30A DC/DC uModule Regulator

Switching Voltage Regulators 3A 2MHz Step-Down Regulator w/Switch

Digital to Analog Converters - DAC

Silicon Oscillator 5MHz/ 2.5MHz/ 1.25MHz/ 0.625MHz/ 0.312MHz/ 0.078MHz/ 0.039MHz- 0.032768MHz to 8.1

2.7V to 18V Input, Boost Converter with 0.1uA True Shutdown, Short Circuit Protection and Selectable Input Current Limit

LDO Voltage Regulators 20V 200mA LDO 1.8Vo

Battery Management I2C Prog Linear Battery Charger

Switching Voltage Regulators CMOS Micropower Step-Up Switching Regulator

RF Amplifier 1:4 Single Ended Active RF Splitter

Conv DC-DC 3V to 25V Step Down Single-Out 3.3V 1.5A 8-Pin MSOP T/R

Analog to Digital Converters - ADC 24-Bit Power Delta-Sigma ADC

Op Amp, SOP-8,

Switching Voltage Regulators High Efficiency, 140V 400mA Step-Down Regulator

Battery Management High Voltage 2 Amp Monolithic Li-Ion Battery Charger

Security ICs / Authentication ICs PUF ENABLED SHA-3 Secure Authenticator

Processor Supervisor 3.085V/4.675V/Adj 3 Active Low/Open Drain Automotive 8-Pin MSOP

6 DOF PREC IMU, 40G (500 DPS D

SP Amp Current Sense Amp Single 60V Automotive 8-Pin MSOP

Analog Devices SSM2404PZ is a quad SPST analog switch IC optimized for audio applications with ultra-low signal distortion, supporting dual supply voltages from ±5.5 V to ±12 V. It integrates four independent normally-open switches in a 20-pin PDIP package for audio signal routing and mixing. Available RoHS-compliant with worldwide distribution and fast shipping.

LDO Voltage Regulators 3uA Iq, 20mA Low Dropout Linear Regulators

Switching Controllers Low IQ, 60V, High Frequency Synchronous Step-Down Controller

Digital to Analog Converters - DAC 16-Bit SPI Octal DAC (1.25V Reference, 12LSB INL)

Switching Voltage Regulators 125mA, Frequency-Selectable, Switched-Capacitor Voltage Converters

Conv DC-DC 2.65V to 10V Synchronous Step Down Single-Out 0.8V to 10V 0.6A 8-Pin MSOP Tube

Analog Devices LTM4642EY#PBF is a high-density µModule step-down DC/DC regulator delivering up to 4 A output with adjustable 0.6 V to 5.5 V output from a 2.375 V to 20 V input using current-mode PWM control. It integrates inductor, MOSFETs, and controller in a compact 11.25 mm × 9 mm × 4.92 mm BGA-56 package. Available from stock worldwide.

The LTC6957HMS-4#PBF is a dual-output, low phase noise clock buffer and logic level converter from Analog Devices, featuring complementary CMOS outputs and differential input conditioning. It supports low skew clock distribution in precision timing applications. Available in a compact 12-lead MSOP package with RoHS-compliant, lead-free construction.

Clock Buffer Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with Complementary CMOS Outputs

5 kVrms/3 kV rms signal and power isolated CAN transceivers isoPower integrated isolated dc-to-dc converter VIO pin for 1.7 V to 5.5 V logic levels ISO 11898-2:2016 compliant (CAN FD) Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 150 ns Extended common-mode range: ±25 V Bus fault protection: ±40 V on CANH and CANL pins Low power standby support remote wake request Extra isolated signal for control (such as termination switches) Passes EN 55022 Class B by 6 dB Slope contr

5 kVrms/3 kV rms signal and power isolated CAN transceivers isoPower integrated isolated dc-to-dc converter VIO pin for 1.7 V to 5.5 V logic levels ISO 11898-2:2016 compliant (CAN FD) Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 150 ns Extended common-mode range: ±25 V Bus fault protection: ±40 V on CANH and CANL pins Low power standby support remote wake request Extra isolated signal for control (such as termination switches) Passes EN 55022 Class B by 6 dB Slope contr

Battery Management 1-Cell or 2-Cell Stand-Alone Fuel Gauge IC

Analog Devices LTC6256CMS8#TRPBF is a dual precision rail-to-rail input/output op-amp with 6.5 MHz bandwidth and ultra-low supply current of 65 µA per amplifier, packaged in an MSOP-8. From $2.80 in stock with worldwide shipping.

Sensor Interface Dual Driver IO-Link Device Transceiver with EMC Protection and DC/DC