LTC2625CGN#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
LTC2625CGN#PBF is an octal 12-bit I2C voltage-output DAC with a maximum analog output of 5.5V and less than 0.1% linearity error in a 16-pin SOIC package. It uses a serial binary input format, enabling easy multi-channel voltage control from a 2-wire I2C bus. Available from stock with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 16
- Lifecycle
- ACTIVE
- Datasheet
- LTC2625CGN#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $11.6000(MOQ 19)
- Temp Range
- ?°C to 70.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Octal (8-channel) 12-bit I2C DAC in a single 16-pin SOIC package minimizes board area and I2C bus address usage for multi-channel analog voltage generation
- Maximum analog output voltage of 5.5V with less than 0.098% linearity error (INL) enables precise voltage setting in calibration and control circuits
- Serial I2C binary input interface requires only 2 wires to control all 8 channels, simplifying firmware integration and reducing GPIO usage on the host MCU
Applications
The LTC2625CGN#PBF is used in multi-channel analog control systems such as programmable power supplies, laser driver bias circuits, and industrial calibration equipment where 8 simultaneous 12-bit voltage outputs are needed from a single I2C-connected device. Its 5.5V output range and low linearity error make it suitable for precision analog trim, offset correction, and threshold setting in data acquisition front-ends. Audio equipment, sensor excitation circuits, and test and measurement instrumentation also leverage its 8-output architecture to reduce component count and I2C bus overhead.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1641 (GN16) |
| YTEOL | 10 |
| Analog Output Voltage-Max | 5.5V |
| Converter Type | D/A CONVERTER |
| Input Bit Code | BINARY |
| Input Format | SERIAL |
| JESD-30 Code | R-PDSO-G16 |
| JESD-609 Code | e3 |
| Linearity Error-Max (EL) | 0.0977% |
| Number of Bits | 12 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SSOP16,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Settling Time-Nom (tstl) | 7 µs |
| Supply Voltage-Nom | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | COMMERCIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many DAC channels does LTC2625CGN#PBF provide, and what resolution does each channel offer?
The LTC2625CGN#PBF integrates 8 independent DAC channels, each with 12-bit resolution. This gives 4096 discrete output steps per channel, enabling fine-grained analog voltage control for multi-axis precision positioning, multi-channel bias generation, and calibration reference applications in a single IC.
What is the maximum output voltage and linearity specification of the LTC2625CGN#PBF?
The DAC can output up to 5.5V with a maximum linearity error (INL) of approximately 0.098%, which is less than 4 LSBs at 12-bit resolution. This level of linearity is suitable for precision analog control, programmable gain amplifiers, and calibration references in industrial measurement systems.
Why does using I2C on the LTC2625CGN#PBF reduce GPIO requirements compared to a parallel-input 8-channel DAC?
The I2C serial interface requires only 2 wires (SDA and SCL) to address and update all 8 channels, regardless of the number of outputs. A parallel-input 8-channel DAC would need at least 12 or more GPIO lines for data, address, and control signals, making I2C far more efficient in systems with limited MCU pin count or when many DACs must share a bus.
Which package does LTC2625CGN#PBF use, and how does it simplify board assembly compared to a QFN alternative?
The LTC2625CGN#PBF comes in a 16-pin SOIC (Small Outline IC) package with gull-wing leads on 1.27mm pitch. The exposed leads are visible and easy to inspect after reflow, making it more straightforward to rework and hand-solder than a bottom-terminated QFN, which is valuable in prototyping or low-volume production environments.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 19+ | $15.3700 | $292.03 |
| 25+ | $13.7508 | $343.77 |
| 100+ | $12.6125 | $1261.25 |
| 1000+ | $11.6000 | $11600.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”