Analog Devices

LT1017IS8 is a dual micropower voltage comparator IC from Analog Devices with only 25 nA maximum bias current and 1.4 mV input offset voltage. Operates from single or dual supplies up to ±20 V with open-collector outputs compatible with TTL, CMOS, and ECL logic families. Housed in 8-pin SOIC package for low-power threshold detection and window comparator circuits.

LT1632IN8#PBF is a precision dual rail-to-rail input and output operational amplifier with 45 MHz gain-bandwidth product and 45 V/µs slew rate in an 8-pin DIP package. It achieves 81 dB minimum CMRR with 2.8 µA maximum input bias current. Ideal for precision data acquisition, active filtering, and signal conditioning circuits requiring wide bandwidth and rail-to-rail swing.

LTC6081CMS8#TRPBF is a dual precision rail-to-rail input/output op-amp from Analog Devices with 90 µV max offset, 100 dB CMRR, and automotive-grade operation up to 5.5 V in an MSOP-8 package. Delivers precision signal amplification for automotive and industrial sensor conditioning. Available from stock worldwide with competitive pricing.

HMC346MS8GETR**MULT1^4770^3098788

Analog Devices LTC2066HSC6#TRMPBF is a single zero-drift operational amplifier with 2 µA quiescent current in a miniature SOT-23-6 package. Offers 103 dB min CMRR, 35 pA max input bias current, and auto-zeroing for near-zero offset drift over temperature. Available in tape-and-reel from global distributors worldwide.

Analog Devices LTC6993IDCB-4#TRMPBF is a retriggerable monostable multivibrator (one-shot) with falling-edge trigger in a 6-pin SOT-23 no-lead package. Output pulse width is programmable from 1 µs to 33.6 seconds via an external resistor-capacitor network. Available from stock with worldwide shipping.

Analog Devices LTC6081IMS8 is a dual precision rail-to-rail input/output op-amp with 90 µV maximum offset voltage rated for automotive use. It operates from 1.8 V to 5.5 V with 100 dB typical CMRR in an 8-pin MSOP package. Available from stock worldwide for high-accuracy sensor signal conditioning and automotive applications.

Analog Devices LTC6995MPS6-1#TRMPBF is a programmable CMOS low-frequency oscillator and long timer operating between 29.1 Hz and 977 Hz output range. It features an enable/disable function and resistor-set frequency adjustment in a compact 6-pin SOT-23 surface-mount package. Suitable for watchdog timers, blink controllers, and low-power timing circuits.

Clock Generator 5MHz to 4GHz-IN 200MHz-OUT 16-Pin TSSOP T/R

Analog Devices LTC6957IMS-2#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 12 pins, -40°C to 85°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

The LTC6244HVCDD#PBF is a dual high-speed, rail-to-rail output operational amplifier from Analog Devices, rated for automotive applications at ±5.25V or 10.5V supply, featuring 80 dB CMRR and 800 µV max offset voltage. Available in an 8-Pin DFN package with competitive pricing and worldwide shipping.

Analog Devices HMC346MS8GTR is an 8-pin SMT GaAs MMIC digital attenuator with 32 dB nominal attenuation, 2.5 dB maximum insertion loss, and 50 Ω characteristic impedance for RF signal-level control. It handles up to 18.06 dBm CW input power in a compact plastic SOIC-8 package. Available from authorized RF component distributors globally.

Digital Isolator CMOS 2-CH 25Mbps 8-Pin SOIC N T/R

Clock Buffer Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with CMOS Outputs

Active Filters 10th Order Linear Phase L/Pass Filter

Clock Buffer Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with LVDS Outputs

Clock Buffer Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with LVDS Outputs

Single/Dual/Quad 60MHz, 20V/µs, Low Power, Rail-to-Rail Input and Output Precision Op Amps

Analog Devices HMC219AMS8TR is a GaAs MMIC SMT double-balanced mixer covering the 4.5 GHz to 9 GHz frequency range, designed for microwave frequency conversion in RF systems. It is housed in an 8-lead TSSOP surface mount package for compact PCB integration. Ideal for satellite communications, radar, and test equipment requiring low conversion loss mixing over a wide RF bandwidth.

The LTC1860LCMS8#TRPBF is a 12-bit successive approximation ADC from Analog Devices with a 150 ksps sampling rate operating from a 3 V supply. It accepts a 2.5 V maximum analog input, features a 4.66 µs maximum conversion time, and is packaged in a compact 8-pin MSOP for space-constrained designs.

The LTC6911IMS-2#PBF is a dual digitally controlled programmable gain amplifier from Analog Devices offering two independent channels in a 10-pin MSOP package. It supports dual supply voltages from ±1.35 V to ±5.25 V with software-selectable gain settings for precise signal conditioning. Available in a RoHS-compliant lead-free finish for industrial-grade precision measurement systems.

Precision Amplifiers 2x 50MHz, L N, R2R, CMOS Op Amp

1-Channel Single ADC Pipelined 65Msps 10-bit Parallel 28-Pin TSSOP T/R

The LTC6244HMS8#PBF is a dual precision 50 MHz low-noise CMOS operational amplifier from Analog Devices, featuring voltage-feedback architecture with 74 dB CMRR and 400 µV max input offset voltage. Packaged in an 8-pin MSOP for compact layouts. Suitable for high-speed signal conditioning and precision measurement applications.

Analog Devices LTC1258CMS8-2.5#PBF is a micropower low-dropout series bandgap voltage reference providing a precise 2.5V output with ±0.2% initial accuracy, in an SOIC-8 package for precision analog and ADC reference applications.

Analog Devices LTC4417HUF#TRPBF is a 3-channel prioritized PowerPath controller accepting 2.5 V to 36 V inputs with adjustable OV/UV thresholds at 1 V reference, housed in a 24-lead QFN package for compact multi-supply systems. Available in stock with worldwide shipping.

Vector modulator HMC631LP3ETR

Analog Devices LT1999CMS8-10#TRPBF is a high-voltage bidirectional current-sense amplifier with 120dB CMRR, 10x fixed gain, up to ±500V common-mode input, and MSOP-8 package for motor-drive and industrial current monitoring.

Analog Devices LTC1258CMS8-2.5 is a micropower low-dropout series bandgap voltage reference providing a precise 2.5 V output in an 8-pin SOIC package, ideal for battery-powered and portable measurement applications.

EVAL BOARD

Analog Devices OP400HS-REEL is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 16 pins, -16 W, -40°C to 85°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

40VIN, 2.5A Silent Switcher μModule Regulator

Analog Devices LT6703HVIS5-2 is an ultralow power comparator with integrated 400 mV reference, operating from 1.7 V to 18 V supply, available in SOT-23-5 package for space-constrained applications.

Attenuators Fixed Passive SMT atten, DC - 25 GHz

Passive RF Multipliers x2 4GHz to 8GHz Output 8-Pin MSOP T/R

LTC6992CS6-1 is a voltage-controlled silicon oscillator from Analog Devices generating frequencies from 3.81 Hz to 1 MHz. It features a single resistor frequency set and CMOS output in a compact 6-pin TSOT-23 package rated for automotive applications.

Analog Devices LTM4636IY-1#PBF is a 40A DC-DC µModule regulator in BGA-144 package, featuring enhanced efficiency, current-mode control with PWM, and 4.7–15 V input range for high-density power delivery.

LT1460GIZ-5#PBF is a 5 V precision bandgap voltage reference from Analog Devices with output tolerance of ±0.05% (4.9875 V to 5.0125 V), 3-pin SOT-23 package, for high-accuracy ADC and DAC references.

LINEAR TECHNOLOGY - LTC1147CS8-5#PBF - DC/DC Controller, High Efficiency, 3.5V to 16V, 1 Output, Buck, 400kHz, SOIC-8

Analog Devices LT1999CMS8-20#TRPBF is a high-voltage bidirectional current-sense amplifier with 120 dB CMRR, 20x gain, and up to 1500 µV input offset, designed for precision power monitoring in an 8-pin SOIC package.

Analog Devices LTC6091IUFE#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 16 pins, 140 V, -40°C to 85°C in HVQCCN. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LTC2641IMS8-14#TRPBF is a single-channel 14-bit unbuffered voltage output DAC with serial SPI interface, housed in an 8-pin MSOP package. It supports unipolar output voltage up to 2.5 V with offset binary input coding, ideal for precision signal generation, calibration, and industrial control applications.

Analog Devices LT1999CMS8-20F#TRPBF is a high-voltage bidirectional current-sense amplifier with 105 dB CMRR, 1500 µV maximum input offset voltage, current-feedback architecture, and an 8-pin MSOP package engineered for Pin FMEA robustness.

Analog Devices LTC4091EDJC#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 22 pins, 36 V, -40°C to 125°C in HVSON. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

The LT1999CMS8-10#PBF is a high-voltage bidirectional current-sense amplifier from Analog Devices with 120 dB CMRR, fixed 10 V/V gain, 1.5 mV input offset voltage, and wide common-mode input range, housed in an 8-pin MSOP package.

Analog Devices LT6106HS5#TRMPBF is a precision high-side current sense amplifier with 36 V input range, 350 µV max offset voltage, and 200 kHz bandwidth in a compact 5-pin SOT-23 package. Enables accurate current monitoring in battery and power management circuits.

OR Controller P-channel Single 0.245Ohm 5-Pin TSOT-23 T/R

DC/DC Cntrlr Single-OUT Step Down 600kHz Automotive 10-Pin MSOP EP T/R

Analog Devices LTC2488IDE#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 14 pins, 16-bit, -40°C to 85°C in Small Outline No-lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LT1999CMS8-50 is a high-voltage bidirectional current sense amplifier with 120 dB CMRR, 1500 µV offset voltage, current-feedback architecture, and SO-8 package for precision power monitoring.