LT1017IS8#TRPBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
LT1017IS8 is a dual micropower voltage comparator IC from Analog Devices with only 25 nA maximum bias current and 1.4 mV input offset voltage. Operates from single or dual supplies up to ±20 V with open-collector outputs compatible with TTL, CMOS, and ECL logic families. Housed in 8-pin SOIC package for low-power threshold detection and window comparator circuits.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- LT1017IS8#TRPBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $4.1700(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Ultra-low 25 nA maximum input bias current enabling direct connection to high-impedance sensor outputs without loading errors
- Single or dual supply operation up to ±20 V accommodating a wide range of analog system supply architectures
- 1.4 mV maximum input offset voltage for accurate threshold detection in precision level sensing applications
- Open-collector outputs compatible with TTL, CMOS, and ECL logic levels for versatile digital interface options
- Micropower supply current below 100 µA total, ideal for battery-operated and always-on sensing circuits
Applications
The LT1017IS8 is used in battery-powered instruments and remote sensor nodes where its ultra-low 25 nA bias current and micropower supply consumption below 100 µA allow continuous threshold monitoring without measurably draining the battery. Precision window comparator circuits in industrial 4–20 mA transmitters, over-temperature alarms, and under-voltage lockout circuits benefit from the 1.4 mV offset accuracy and wide ±20 V supply range. The open-collector outputs also make it a natural fit for wire-OR bus arbitration and mixed-voltage flag signaling between 3.3 V microcontroller GPIOs and legacy 5 V or 12 V control logic.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1610 (S8) |
| YTEOL | 10 |
| Amplifier Type | COMPARATOR |
| Average Bias Current-Max (IIB) | 0.025 µA |
| Input Offset Voltage-Max | 1400 µV |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Neg Supply Voltage Limit-Max | -20 V |
| Number of Functions | 2 |
| Output Type | OPEN-COLLECTOR |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TR |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Supply Voltage Limit-Max | 40V |
| Supply Voltage-Nom (Vsup) | 4.5V |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| ## LT1017IS8#TRPBF Alternates Showing results | Image |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for LT1017IS8#TRPBF:
suggested
Frequently Asked Questions
How low is the input bias current of the LT1017IS8 and why does it benefit high-impedance sensor interfaces?
The LT1017IS8 specifies a maximum input bias current of only 25 nA, which causes less than 25 µV of error even when connected to a 1 MΩ source impedance. This makes it suitable for interfacing directly with piezoelectric sensors, pH electrodes, and photodiode circuits that cannot tolerate comparator input loading without adding a unity-gain buffer stage.
What supply voltage range does the LT1017IS8 support and can it work in ±15 V instrumentation systems?
The LT1017IS8 operates from a single supply of 2 V to 36 V or dual supplies up to ±18 V, comfortably fitting within ±15 V precision instrumentation power rails common in industrial analog systems. The wide supply range means one comparator part covers both low-voltage microcontroller boards and higher-voltage analog front-end circuits without design changes.
How does the LT1017IS8 compare to a standard LM393 in a battery-powered IoT threshold detector?
The LT1017IS8 consumes under 100 µA total supply current versus the LM393's typical 400 µA, reducing idle power by 4x in an always-on comparator circuit. Over one year of continuous operation from a 1,000 mAh battery, this difference saves approximately 2,600 mAh, effectively quadrupling battery life compared to using the LM393 in the same design.
Are the LT1017IS8 outputs compatible with 3.3 V microcontroller GPIO inputs?
Yes, the LT1017IS8 has open-collector outputs that can be pulled up to any voltage within the supply range, including 3.3 V, 5 V, or 12 V. Connecting a 100 kΩ pull-up resistor to 3.3 V makes the output directly readable by a microcontroller GPIO, while the same device output can simultaneously interface with a 5 V TTL logic input on another board via a separate pull-up resistor.
Related Guides
How to Choose a 3528 SMD Indicator LED for Blue Status Lighting: Selection Guide
A practical 3528 SMD indicator LED selection guide using 150141BS73100 and related Wurth 150141 variants for blue status lighting.
Jul 5, 2026
BAS70KFILM Design Guide for Low-Leakage Signal Clamping and RF Detector Inputs
Practical BAS70KFILM design guidance for signal clamps, RF detector inputs, leakage control, capacitance, layout, and sourcing alternatives.
Jul 5, 2026
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $8.4600 | $8.46 |
| 19+ | $5.5300 | $105.07 |
| 250+ | $4.5375 | $1134.38 |
| 1000+ | $4.1700 | $4170.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”