Integrated Circuit

Si4461-C2A-GMR is a Silicon Labs integrated circuit for industrial electronics and embedded systems. Key specs include 2 A, 21 pins, and Quad Flat No-Lead. From quoted pricing with in stock worldwide shipping support.

The H8/38099 Group is supported only for the customers who have already adopted any of the products. For new adoption, please consider other products such as RL78/L1C, RX113 Group.

Si4461-C2A-GM is a Silicon Labs integrated circuit for industrial electronics and embedded systems. Key specs include 2 A, 21 pins, and Quad Flat No-Lead. From quoted pricing with in stock worldwide shipping support.

Si4461-B1B-FMR is an integrated circuit from Silicon Labs for embedded control and signal-processing. It provides 21 pins in Quad Flat No-Lead format for repeatable production sourcing. From $0.00 in stock worldwide shipping.

Toggle Switches 2 Pole 2 Position ON-ON

Maxim MAX9716EUA+T is a Class AB mono audio amplifier delivering 1.4 W output power with a 22 kHz bandwidth, housed in a compact 8-pin UMAX package. Suitable for portable and consumer audio devices. From stock worldwide shipping.

Diodes Inc. ZXCT1051E5TA is a high-side power and current monitor IC in a compact SOT-23-5 package, capable of sensing load currents up to 1 A with a supply voltage range of 2.5 V to 36 V. It delivers a voltage output proportional to load current for real-time monitoring without a low-side shunt resistor. Available from stock worldwide with fast shipping.

FXAS21002CQR1 is a NXP Integrated Circuit for OEM production, repair, and approved BOM replacement. Key specs: 24 pins, -40°C to 85°C; package: Pull-back Quad Flat No-lead / QCCN. FindMyChip supports inquiry-based sourcing, inventory checks, and worldwide shipping.

SOIC-8

1.2 MM HEIGHT, LEAD FREE, MO-153ADT, TSSOP-24

LP2951 also has Output Programmable from 1.25 V to 29 V; Requires Only a 1.0 mF Output Capacitor for Stability; Low Input-to-Output Voltage Differential of 50 mV at 100 mA and 380 mV at 100 mA; Extremely Tight Line and Load Regulation; Low Quiescent Bias Current of 75 mA; 5.0 V, 3.3 V or 3.0 V +/- 0.5% Allows Use as a Regulator or Reference; LP2951 also has Error(bar) Output Signals an Out of Regulation Condition; Internal Current and Thermal Limiting; LP2951 also has Logic Level Shutdown Input; Pb-Free Pac

LP2951 also has Output Programmable from 1.25 V to 29 V; Requires Only a 1.0 mF Output Capacitor for Stability; Low Input-to-Output Voltage Differential of 50 mV at 100 mA and 380 mV at 100 mA; Extremely Tight Line and Load Regulation; Low Quiescent Bias Current of 75 mA; 5.0 V, 3.3 V or 3.0 V +/- 0.5% Allows Use as a Regulator or Reference; LP2951 also has Error(bar) Output Signals an Out of Regulation Condition; Internal Current and Thermal Limiting; LP2951 also has Logic Level Shutdown Input; Pb-Free Pac

Low Quiescent Current (125 mA); Internal Current and Thermal Limiting; Low Input-to-Output Voltage Differential of 25 mV at IO = 10mA, and 260 mV at IO = 300 mA; Extremely Tight Line and Load Regulation; Stable with Output Capacitance of only 0.33 mF for 2.5 V Output Voltage

SOT-353, 5 PIN

CA3260A and CA3260 are integrated circuit operational amplifiers that combine the advantage of both CMOS and bipolar transistors on a monolithic chip. The CA3260 series circuits are dual versions of the popular CA3160 series. Gate protected P-Channel MOSFET (PMOS) transistors are used in the input circuit to provide very high input impedance, very low input current, and exceptional speed performance. The use of PMOS field effect transistors in the input stage results in common mode input voltage capability

CA3260A and CA3260 are integrated circuit operational amplifiers that combine the advantage of both CMOS and bipolar transistors on a monolithic chip. The CA3260 series circuits are dual versions of the popular CA3160 series. Gate protected P-Channel MOSFET (PMOS) transistors are used in the input circuit to provide very high input impedance, very low input current, and exceptional speed performance. The use of PMOS field effect transistors in the input stage results in common mode input voltage capability

NJR NJM2904D is a dual operational amplifier in an 8-pin DIP package, featuring 85 dB common-mode rejection ratio, 7000 µV max input offset voltage, and 0.25 µA max bias current. It uses voltage-feedback architecture with internal frequency compensation. From $0.50 in stock with worldwide shipping.

The R8C/1B Group is supported only for customers who have already adopted these products. The RL78/G12 Group is recommended for new designs.These MCUs are fabricated using the high-performance silicon gate CMOS process, embedding the R8C/ Tiny Series CPU core, and is packaged in a 20-pin molded-plastic LSSOP, SDIP or a 28-pin plastic molded HWQFN. It implements sophisticated instructions for a high level of instruction efficiency. With 1Mb of address space, they are capable of executing instructions at high

The R8C/23 Group is supported only for customers who have already adopted these products.This MCU is built using the high-performance silicon gate CMOS process using the R8C CPU core and is packaged in a 48-pin plastic molded LQFP. This MCU operates using sophisticated instructions featuring a high level of instruction efficiency. With 1Mb of address space, it is capable of executing instructions at high speed. This MCU is equipped with one CAN module and suited to in-vehicle or FA networking. Furthermore,

BS2103F-E2 is a ROHM Semiconductor integrated circuit component for integrated circuit designs. It supports 1 channel in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Use the download button to access the BD9611MUV-E2 schematic symbol, PCB footprint, and 3D model.

DG509ACJ+ is a Maxim Integrated capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 16 pins, Dual-In-Line Packages, and datasheet-backed parameters. Available through FindMyChip sourcing with worldwide shipping support.

TNY266PN is a Power Integrations switch for industrial, embedded, instrumentation, and production electronic assemblies. Key details include 8 pins, Dual-In-Line Packages, and -40°C to 125°C. Available through FindMyChip sourcing with worldwide shipping support.

Q414045510001 RX-4045SA AA is a Epson Timing electronic component for industrial, embedded, instrumentation, and production electronic assemblies. Key details include 14 pins, Small Outline Packages, and datasheet-backed parameters. Available through FindMyChip sourcing with worldwide shipping support.

S1V30120F01A100 is a Epson ICs microcontroller for industrial, embedded, instrumentation, and production electronic assemblies. Key details include 64 pins, Quad Flat Packages, and datasheet-backed parameters. Available through FindMyChip sourcing with worldwide shipping support.

Maxim DS3234SN# is an extremely accurate SPI real-time clock with integrated 256-byte SRAM, battery backup, and calendar functions in a 20-pin SOIC package. It operates up to 4 MHz SPI clock and supports 2.0 V minimum operation, making it ideal for data loggers, embedded systems, and portable instrumentation.

The 843004I-156 is a 4 output LVPECL synthesizer optimized to generate Ethernet reference clock frequencies. Using a 25MHz 18pF parallel resonant crystal, the 843004I-156 can generate 156.25MHz.The 843004I-156 uses IDT's 3RD generation low phase noise VCO technology and can achieve 1ps or lower typical rms phase jitter, easily meeting Ethernet jitter requirements. The 843004I-156 is packaged in a small 24-pin TSSOP E-Pad package.

Epson RTC-7301SF (B) is a 4-bit real-time clock module in a 24-pin SSOP package with parallel interface, delivering accurate timekeeping with calendar and alarm functions for industrial controllers and embedded computing systems.

SII Semiconductor S-8209AAF-T8T1S is a single-channel lithium-ion battery protection IC in a TSSOP-8 package. Provides overcharge, overdischarge, and overcurrent protection for 1-cell Li-ion battery packs with precision voltage detection thresholds. Available in stock worldwide with fast shipping.

RTC-7301DG (B) is a Epson Timing power-management component for regulated power conversion designs. It supports 1 channel in a Dual-In-Line Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

S-1132B33-M5T1G is a SEIKO INSTRUMENTS integrated circuit component for integrated circuit designs. It supports 1 channel in a SOT23 (5-Pin) package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

CDS4006ABC-KA is a Sensitec integrated circuit for board-level electronic assemblies. Key specs include 10 pins and 6 A. From RFQ pricing, FindMyChip supports stock checks and worldwide shipping.

Si8606AD-B-IS is a Silicon Labs integrated circuit for board-level electronic assemblies. Key specs include 16 pins and 16 pins. From RFQ pricing, FindMyChip supports stock checks and worldwide shipping.

MAX9602EUG+ is a Maxim Integrated integrated circuit for board-level electronic assemblies. Key specs include 24 pins and -40 to 85 °C operating range. From RFQ pricing, FindMyChip supports stock checks and worldwide shipping.

MAX13431EETB+T is a Maxim Integrated integrated circuit for board-level electronic assemblies. Key specs include 10 pins and -40 to 85 °C operating range. From RFQ pricing, FindMyChip supports stock checks and worldwide shipping.

SiP32401ADNP-T1GE4 is a Vishay integrated circuit for board-level electronic assemblies. Key specs include 5 pins and -40 to 85 °C operating range. From RFQ pricing, FindMyChip supports stock checks and worldwide shipping.

SIP32431DNP3-T1GE4 is a Vishay integrated circuit for board-level electronic assemblies. Key specs include 5 pins and -40 to 85 °C operating range. From RFQ pricing, FindMyChip supports stock checks and worldwide shipping.

Si8606AC-B-IS1 is a Silicon Labs integrated circuit component for integrated circuit designs. It supports 8606A in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

CDS4050ABC-KA is a Sensitec sensor component for environmental sensing and thermal monitoring. It supports 50A in a supplier-specified package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

AP3429AKTTR-G1 is a Diodes Inc. integrated Circuit for regulated power-supply designs. Key specs include 5.5 V, 2.7 V, and SOT23 (5-Pin). From inquiry pricing, it supports worldwide shipping for production builds.

Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible – Interface Capability with 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Current Drive Capability is 24 mA at the Outputs; Chip Complexity: FETs = 94; Pb-Free Package is Available

CY15B104Q-LHXI is a Cypress Semiconductor integrated circuit component for integrated circuit designs. It supports 1 channel in a Small Outline No-lead package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

MAX15059AETE+T is a Maxim Integrated integrated circuit component for regulated power conversion designs. It supports 76V in a supplier-specified package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Si88620ED-IS is a Silicon Labs integrated circuit component for integrated circuit designs. It supports 1 channel in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

VCNL4020-GS08 is a Vishay integrated Circuit for digital interface and control systems. Key specs include 0.002 mA, IC package, and IC package. From inquiry pricing, it supports worldwide shipping for production builds.

MAX1951AESA+ is a Maxim Integrated power-management component for regulated power conversion designs. It supports 1MHz in a supplier-specified package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

X1B000242000112 is a Epson Timing power-management component for regulated power conversion designs. It supports 1 channel in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

MAX189BCPA+ is a Maxim Integrated integrated Circuit for regulated power-supply designs. Key specs include 5.25V, 5.3 V, and Dual-In-Line Packages. From inquiry pricing, it supports worldwide shipping for production builds.

MAX14978ETO+ is a Maxim Integrated Integrated Circuit for OEM production, repair, and approved BOM replacement. Key specs: 42 pins, -40°C to 85°C; package: Quad Flat No-Lead / 42-LFCSP-3.5X9X0.75. FindMyChip supports inquiry-based sourcing, inventory checks, and worldwide shipping.

MAX44251AUA+ is a Maxim Integrated integrated Circuit for embedded electronics and industrial control designs. Key specs include 20 V, Small Outline Packages, and Small Outline Packages. From inquiry pricing, it supports worldwide shipping for production builds.