Integrated Circuit

Linear Technology LTC1694-1IS5#PBF is an I2C/SMBus bus accelerator IC in a 5-pin SOT-23 package that drives capacitive bus loads to achieve Fast Mode 400 kHz and up to 1 MHz I2C communication rates. It operates from a 2.85 V to 5.5 V supply and extends usable bus length beyond the standard 400 pF capacitive limit. Available from authorized distributors with worldwide shipping.

Single/Dual/Quad, High-Side Current-Sense Amplifiers with Internal Gain

Dual non-retriggerable monostable multivibrator with reset

Linear Technology LTC1694-1CS5#PBF is a single-channel I2C/SMBus accelerator IC in a 5-pin SOT-23 package that boosts bus rise times to support 400 kHz Fast Mode over longer cable runs. Operates from 2.7 V to 5.5 V supply with minimal quiescent current. Available from stock with worldwide shipping.

VCNL3020-GS18 is a Vishay Integrated Circuit for industrial controls and power management. Key specs include 10 pins, -25°C to 85°C, and 2.4 mm. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.

Supervisory Circuits Voltage Detector 0.35uA Iq

Use the download button to access the VCNL3020-GS08 schematic symbol, PCB footprint, and 3D model.

Supervisory Circuits CMOS DETEC VOLT 4.7V

RNA51B27FLPEL is a Renesas Electronics Connector for board-to-board interconnects and module stacking. Key specs include 5 pins and -40°C to 85°C. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.

LINEAR TECHNOLOGY - LTC4054LES5-4.2#PBF - CHARGER, BATTERY, LI-ION, 0.15A, 5SOT23

Operating Voltage Range: 2 to 6 V; Outputs Directly Interface to CMOS, NMOS, and TTL; Low Input Current: 1 mA; Output Drive Capability: 15 LSTTL Loads; High Noise Immunity Characteristic of CMOS Devices; In Compliance with the Requirements Defined by JEDEC Standard No. 7A; Chip Complexity: 308 FETs or 77 Equivalent Gates; Pb-Free Packages are Available

Use the download button to access the SFH619A schematic symbol, PCB footprint, and 3D model.

TMDS Digital Video Equalizer for DVI/HDMI Cables

MC14553BCP is a ON Semiconductor integrated circuit for industrial and embedded electronics. It provides 16 pins, -55°C to 125°C, Dual-In-Line Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.

Buck Switching Regulator IC Positive Adjustable 1.23V 1 Output 3A TO-263-6, D2PAK (5 Leads + Tab), TO-263BA

TO-263, 5 PIN

Voltage Regulators - Switching Regulators 28V, 2A, 200kHz Step-Down Converter

Use the download button to access the 74LVC4245APW schematic symbol, PCB footprint, and 3D model.

UDFN-8

Supports Standard, Fast and Fast-Plus I2C Protocol; 1.8 V to 5.5 V Supply Voltage Range; 64-Byte Page Write Buffer; Hardware Write Protection for Entire Memory; Schmitt Triggers and Noise Suppression Filters on I2C Bus Inputs (SCL and SDA); Low Power CMOS Technology; 1,000,000 Program/Erase Cycles; 100 Year Data Retention; Industrial Temperature Range; 8-lead SOIC and TSSOP and 8-pad UDFN packages; This Device is Pb-Free, Halogen Free/BFR Free and RoHS Compliant

Low Crosstalk Between Switches; Analog Power Supply Range (VCC - VEE) = 2.0 to 12.0 V; Chip Complexity:VHC4051 - 184 FETs or 46 Equivalent Gates; VHC4052 - 168 FETs or 42 Equivalent Gates; VHC4053 - 156 FETs or 39 Equivalent Gates; Diode Protection on All Inputs/Outputs; Improved Linearity and Lower on Resistance Than Metal-Gate Counterparts; In Compliance With the Requirements of JEDEC Standard No. 7A; Fast Switching and Propagation Speeds; Digital (Control) Power Supply Range (VCC - GND) = 2.0 to 6.0 V; L

Use the download button to access the LV8712T-TLM-H schematic symbol, PCB footprint, and 3D model.

Remote 16-bit I/O expander for I2C-bus with interrupt

Low Crosstalk Between Switches; Fast Switching and Propagation Speeds; Chip Complexity: HC4051A - 184 FETs or 46 Equivalent Gates HC4052A - 168 FETs or 42 Equivalent Gates HC4053A - 156 FETs or 39 Equivalent Gates; Analog Power Supply Range (VCC - VEE ) = 2.0 to 12.0 V; In Compliance With the Requirements of JEDEC Standard No. 7A; Digital (Control) Power Supply Range (VCC - GND) = 2.0 to 6.0 V; Diode Protection on All Inputs/Outputs; Improved Linearity and Lower ON Resistance Than Metal-Gate Counterparts; L

TSSOP-16

TSSOP-16

HONEYWELL - VF360NT - HALL EFFECT SENSOR, DIGITAL, SOT-23-3

Use the download button to access the ICE5LP4K-SG48ITR schematic symbol, PCB footprint, and 3D model.

Internal Short Circuit Current Limiting; Internal Thermal Overload Protection; Output Current in Excess of 500 mA; Output Transistor Safe-Area Compensation; Output Adjustable between 1.2 V and 37 V; Floating Operation for High Voltage Applications; Eliminates Stocking Many Fixed Voltages; Pb-Free Packages are Available; NCV Prefix for Automotive and Other Applications Requiring Site Control Changes

Rail Comparator

The IS25LQ080B-JNLE is an 8 Mb SPI NOR Flash memory IC from ISSI in a SOIC-8 package, supporting up to 104 MHz clock speed and 100,000 write/erase cycles for reliable embedded non-volatile firmware storage.

LINEAR TECHNOLOGY - LTC3649IFE#PBF - DC/DC CONV, SYNC BUCK, 1MHZ, TSSOP-28

Use the download button to access the BCR421UW6Q-7 schematic symbol, PCB footprint, and 3D model.

LINEAR TECHNOLOGY - LTC3649EUFD#PBF - DC/DC CONV, SYNC BUCK, 1MHZ, QFN-28

Use the download button to access the ZXLD1356ET5TA schematic symbol, PCB footprint, and 3D model.

SOIC-8

HVQCCN, LCC56,.31SQ,20

ROHS COMPLIANT, SSOP-5

Use the download button to access the CY7C65620-56LTXC schematic symbol, PCB footprint, and 3D model.

USB controller high-speed 24 I/O QFN56

FND2000 SR2KF is a Intel microcontroller for embedded control, sensing, industrial automation, and connected device firmware. It combines 41-pin configuration, Quad Flat No-Lead assembly style, and datasheet-backed identification. From RFQ-based sourcing, in-stock options can support worldwide shipping.

TSSOP-14

RS-422/RS-485 Interface IC 3.3V Powered, 15kV ESD-Protected, 12Mbps, Slew-Rate-Limited True RS-485/RS-422 Transceivers

The R8C/27 Group is supported only for customers who have already adopted these products. The RL78/G14 Group is recommended for new designs.These MCUs are fabricated using a high-performance silicon gate CMOS process, embedding the R8C CPU core, and are packaged in a 32-pin molded-plastic LQFP. It implements sophisticated instructions for a high level of instruction efficiency. With 1Mb of address space, they are capable of executing instructions at high speed. Furthermore, the R8C/27 Group has on-chip data

74LV14 - Hex inverting Schmitt trigger@en-us

4.40 MM, PLASTIC, MO-153, SOT402-1, TSSOP-14

Hex inverting Schmitt trigger

4.40 MM, MO-153AB, TSSOP-14

Rail-to-Rail Buffer

+2.7V, Low-Power, 2-Channel, 108ksps, Serial 12-Bit ADCs in 8-Pin