Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 41,051–41,100 of 77,666
CPUXV2 series Microcontroller IC 16-Bit 16MHz 48KB (48K x 8) FRAM 38-TSSOP
CPUXV2 series Microcontroller IC 16-Bit 25MHz 64KB (64K x 8) FLASH 80-LQFP (12x12)
CPUXV2 series Microcontroller IC 16-Bit 16MHz 32KB (32K x 8) FRAM 38-TSSOP
IC MCU 16BIT 32KB FLASH 80LQFP
Texas Instruments LM3S6611 is a 32-bit ARM Cortex-M3 microcontroller running at 50 MHz with 128 KB flash and 64 KB SRAM, featuring integrated USB, UART, SPI, and I2C in a 108-ball BGA package. Suitable for connected embedded control applications.
24 MHz MCU with 8KB FRAM, 1KB SRAM, 10-bit ADC, comparator, UART/SPI/I2C, timer
CD4051BQPWRG4KN is a 20-V 1-channel switch ic by Texas Instruments. Key specs: 20-V, 1-channel, 0A. From quote-based pricing, in stock with worldwide shipping for production sourcing.
Polyphase metering SoC with 6 Sigma-Delta ADCs, LCD, real-time clock, 512KB Flash, 32KB RAM
Polyphase metering SoC with 6 Sigma-Delta ADCs, LCD, real-time clock, 512KB Flash, 32KB RAM
CPUXV2 series Microcontroller IC 16-Bit 25MHz 128KB (128K x 8) FLASH 64-VQFN (9x9)
20 MHz MCU with 256KB Flash, 16KB SRAM, 12-bit ADC, 12-bit DAC, comparator, DMA, USB
Single-phase metering SoC with 3 Sigma-Delta ADCs, LCD, real-time clock, 64KB Flash, 4KB RAM
DA
CPUXV2 series Microcontroller IC 16-Bit 25MHz 128KB (128K x 8) FLASH 64-VQFN (9x9)
Texas Instruments LMK04101SQX/NOPB is a dual-channel clock jitter cleaner and clock synchronizer targeting SDH and SONET applications with sub-100 fs RMS jitter performance. Provides 2 low-noise clock outputs in a 48-pin QFN package. Available from stock with worldwide shipping.
LMV881LEX/NOPB
UCC3809DTR-2 is a current-mode PWM switching controller IC from Texas Instruments, operating from a 10 V to 19 V input supply. It provides pulse-width modulation control for DC-DC converters in an 8-pin SOIC package with RoHS-compliant, lead-free construction. Suitable for industrial and telecom power supply designs requiring precise current-mode regulation.
DDC316CGXGR
Texas Instruments LMK04100SQ/NOPB is a 2-channel clock conditioner with integrated PLL in a 48-pin WQFN package, designed for SDH and SONET jitter-attenuation applications. RoHS-compliant lead-free construction. Available from stock with worldwide shipping.
The LMK03001DISQ/NOPB is a precision clock conditioner IC with integrated VCO from Texas Instruments, supporting output frequencies up to 2160 MHz. Housed in a 48-pin WQFN package with AEC-Q100 automotive qualification, it targets demanding timing applications. Available in stock worldwide with automotive-grade reliability.
Texas Instruments LM98725CCMTX/NOPB is a 3-channel analog front-end with 16-bit ADC resolution, ±2.3 V input range, and 755 mW power in a 56-TSSOP package. Supports data acquisition applications with 28 configurable specs. Available from stock with worldwide shipping.
LMV324AQPWRQ1
Use the download button to access the LMT87LPM schematic symbol, PCB footprint, and 3D model.
Retimer Interface 101-FCCSP (6x6)
LMP90077MHX/NOPB is a 2-channel analog front-end IC from Texas Instruments supporting up to 5.5 V input voltage in a 28-pin TSSOP package. It integrates signal conditioning functions with Pb-free construction for precision sensor measurement. Available in production quantities with worldwide shipping.
Restricted Availability: This part number is not currently available from Mouser. Product may be in limited distribution or a factory special order.
Texas Instruments LMK04111SQX/NOPB is a dual-channel clock conditioner with integrated PLL, targeting SDH and SONET applications in a 48-pin WQFN package. RoHS-compliant with lead-free e3 finish. Available from stock with worldwide shipping.
LM3S1751-IBZ50-A2 by Texas Instruments is a 32-bit ARM Cortex-M3 microcontroller with 128 KB Flash, integrated ADC, and on-chip peripherals in a 108-pin BGA package. It runs at up to 50 MHz and includes USB, SSI, UART, and I2C interfaces for embedded control applications. Available worldwide with fast shipping from authorized distributors.
The LMK04011BISQ/NOPB is a low-noise clock synthesizer and jitter cleaner from Texas Instruments with a 1430 MHz to 1570 MHz VCO and 5 LVPECL/2VPECL differential outputs. It features a differential mux input and PLL-based architecture in a 48-pin WQFN package rated -40°C to 85°C. Available from stock worldwide.
Voltage Feedback Amplifier Circuit Push-Pull, Rail-to-Rail 8-SOIC
Texas Instruments UCC2819 average current-mode power factor correction controller operating up to 250 kHz in 16-pin SOIC package. Accepts 10.3V to 17V supply and drives boost PFC stages for high-efficiency AC-DC power conversion. Available from stock with worldwide shipping.
https://www.ti.com/lit/gpn/cd54hc173
The UCC39002P is a current-mode load share controller IC from Texas Instruments housed in an 8-pin DIP package. It operates up to 14.25V and enables parallel power supply current sharing with adjustable threshold control. Available from stock worldwide at competitive pricing for power system designers.
LM27213SQX/NOPB
Texas Instruments LM3S1911 is a 32-bit ARM Cortex-M3 microcontroller with 256KB Flash, operating at 50 MHz, in a 108-ball BGA package, featuring JTAG boundary scan and rich connectivity peripherals for industrial control.
The LM6588MAX/NOPB is a quad 24 MHz voltage-feedback operational amplifier from Texas Instruments optimized for TFT LCD panel drive applications. It operates on a 16 V supply with high output current capability and a 75 dB minimum CMRR. Available in a small-outline package with RoHS-compliant, lead-free finish for industrial and display designs.
Four-channel, differential output, transimpedance amplifier with integrated multiplexing
CMOS Amplifier Circuit Differential, Rail-to-Rail 14-SOIC
IC MCU 32BIT 256KB FLASH 108BGA
LM2833ZMYX/NOPB is a current-mode PWM buck regulator from Texas Instruments delivering up to 3 A output from a 3 V to 5.5 V input, with adjustable output from 0.6 V, in a 10-pin MSOP package.
SN74AHC595PW-P is an 8-bit serial-in parallel-out shift register with 3-state output latches from TI's AHC logic family, operating at up to 40 MHz clock frequency in a 16-pin TSSOP package. It supports 2 V to 5.5 V supply voltage with 50 pF load capacitance and 8 mA output sink current per pin, enabling cascading multiple devices for GPIO expansion. RoHS-compliant, available in stock worldwide with fast shipping.
ARM® Cortex®-M3 series Microcontroller IC 32-Bit 50MHz 256KB (256K x 8) FLASH 108-BGA (10x10)
LM3S1138-IBZ50-A2T is a 32-bit ARM Cortex-M3 microcontroller by Texas Instruments running at up to 50 MHz with 64 KB of on-chip flash memory. Key specs: integrated ADC, boundary scan support, 108-ball BGA package in a 10 x 10 mm footprint. Available from stock with worldwide shipping.
Retimer Interface 101-FCCSP (6x6)
The PLM393LVQPWRQ1 is an AEC-Q100 automotive-qualified dual low-voltage comparator from Texas Instruments featuring open-drain outputs, 5 nA maximum input bias current, and 2 mV maximum input offset voltage in an 8-pin SOIC package. It operates across automotive temperature and supply ranges for reliable signal comparison in vehicle systems. Suited for threshold detection, window comparator circuits, and battery monitoring in automotive and industrial applications.
Texas Instruments LM2901NS is a quad differential comparator operating up to 30 V supply with open-collector outputs and 0.25 µA bias current. The 14-pin SOIC package houses 4 independent comparator channels suited for threshold detection and logic-level conversion in industrial systems.
Use the download button to access the LM3150MHX/J7002527 schematic symbol, PCB footprint, and 3D model.
Switching Voltage Regulators 150 KHZ 1A STEP-DOWN VLTG REG
Automotive-grade quadruple operational amplifier in 14-TSSOP package, rated for -40°C to 125°C. Features single-supply operation from 3 V to 32 V with low supply current of 0.7 mA per amplifier. Available in tape-and-reel format for automated assembly.
Buck Regulator Positive Output Step-Down - DC-DC Controller IC 14-TSSOP
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote