Integrated Circuit

Analog to Digital Converters - ADC 24-bit, 400-kSPS, delta-sigma ADC with easy-to-drive inputs and wideband or low-latency filters

Texas Instruments TMUXHS4212IRKSR is a high-speed 2:1 SPDT differential multiplexer with 13GHz bandwidth supporting 1.8V logic. Ideal for high-frequency signal routing in USB, PCIe, and HDMI applications with ultra-low insertion loss. Available from stock worldwide with competitive pricing and QFN-20 package for compact high-speed board designs.

Use the download button to access the DAC91001PFBT schematic symbol, PCB footprint, and 3D model.

Logic Gates Dual 4-input Positive-NAND gates

The Texas Instruments TPS78533QKVURQ1 is an AEC-Q100 automotive-grade 1A fixed LDO linear regulator with 3.3V output and a maximum dropout voltage of 425 mV. It operates from 1.7V to 6V input with high accuracy in a 4-pin WSON package. Available from stock with worldwide shipping.

The Texas Instruments TLV320ADC5120IRTER is a 2-channel 32-bit delta-sigma audio ADC supporting sample rates from 7.35kHz to 768kHz with I2C, I2S, and TDM digital interfaces in a compact 20-pin WQFN (3x3mm) package. It accepts up to 1.9V analog input and delivers high-resolution audio capture for professional and consumer audio applications. Available from authorized distributors worldwide with competitive pricing and ready stock for immediate shipment.

Texas Instruments TL431ACLP is an adjustable precision shunt voltage reference with 2.495V to 36V programmable output and 100mA maximum current in a TO-92 package. Offers tight 2.495V to 2.52V reference accuracy for reliable feedback regulation. Available from stock with worldwide shipping.

Battery Management Pack-Side Impedance Track Fuel Gauge

The UCC256404DDBR is an LLC resonant controller IC from Texas Instruments featuring current-mode resonant control, ultra-low power standby operation, and high-voltage startup capability, operable from -40°C to 125°C. It integrates advanced burst-mode control for ultra-quiet standby and supports a 13V to 30V input supply range in a 14-pin SOIC package. Available from authorized distributors worldwide with full RoHS compliance.

The TL431ACLPE3 is an adjustable precision shunt voltage regulator with output voltage programmable from 2.495V to 36V and up to 100mA output current in a TO-92 3-pin package. It delivers tight initial accuracy for stable voltage reference and regulation in power supply feedback loops. Available from stock worldwide at competitive prices.

Digital Bus Switch ICs 16B FET Bus Switch

Voltage References 5.0V Reference Diode 3-TO -55 to 125

The TPS63020QDSJRQ1 is an automotive-qualified single-inductor buck-boost switching regulator from Texas Instruments supporting 1.8V to 5.5V input voltage range with current-mode PWM control. It efficiently converts battery voltages above or below the output without power interruption in a 14-pin WSON package. Available in stock worldwide for automotive and industrial power management designs.

The TPS74501PQWDRBRQ1 is an automotive-grade 500mA adjustable LDO voltage regulator with power good output and high PSRR in an 8-SON package. It operates from 1.5V to 6V input with a typical dropout of only 225mV and meets AEC-Q100 automotive qualification. Available from stock worldwide with competitive pricing.

LDO Regulator Pos 3.3V 0.1A 3-Pin(2+Tab) TO-252 Tube

The TPS62060DSG is a 3 MHz, 1.6 A synchronous step-down (buck) converter from Texas Instruments, supporting an input voltage range of 2.7 V to 6 V and adjustable output from 0.8 V to 6 V. It uses voltage-mode PWM control with optional PFM operation for high efficiency across light to heavy loads in an 8-pin SON package. Available in stock with worldwide shipping for portable, IoT, and wearable power supply designs.

Texas Instruments TPS7A1018PYKAR is a 300-mA ultra-low quiescent current LDO voltage regulator with 0.75-V minimum input voltage and 70-mV dropout. Features fixed output and enable pin in a compact 5-DSBGA package rated -40 to 125°C. Available in stock with worldwide shipping.

Texas Instruments TPS74510PQWDRBRQ1 is an automotive-grade 500-mA LDO voltage regulator with low IQ, high PSRR, power good output, and 225-mV typical dropout. Supports 1.5 V to 6 V input range with fixed output in an 8-SON package rated -40 to 125°C. Available in stock with worldwide shipping.

LDO Voltage Regulators 250-mA, 30-V, low-dropout voltage regulator with high accuracy & power good 5-DDPAK/TO-263 -40 to 125

LGA-70

DIP8,.3

Step-Up Voltage Regulator

Switching Voltage Regulators 3A Pwr Mod w/ 5.5V Max Input Vtg

Texas Instruments TPS25947 is a 2.7V to 23V, 5.5A eFuse with true reverse current blocking and input reverse polarity protection, featuring only 28mΩ on-resistance. It provides adjustable current limiting, overvoltage, and thermal protection for robust power path management. Available from stock with worldwide shipping.

Texas Instruments THS4531AIRUNT is an ultra-low-power fully-differential amplifier with rail-to-rail output in a 10-QFN package. Features 2.7 MHz bandwidth, 116 dB CMRR, and -40 to 125°C operating range. Available from stock with worldwide shipping.

Display Drivers & Controllers DLP® automotive 0.55-inch 405nm digital micromirror device (DMD) 149-CPGA (22.3x32.2), -40 to 105

The TCA39306DTMR is a 2-bit FM+ I2C bus and SMBus voltage level translator with open-drain outputs and up to 46ns propagation delay in an 8-pin WSON package. It enables bidirectional voltage translation between mismatched logic levels in I2C and SMBus systems. Available from stock worldwide at competitive prices.

TPS7A1128PYKAR is a positive fixed low-dropout linear voltage regulator from Texas Instruments delivering 500mA at 3.3V with a maximum dropout voltage of 0.13V. It is housed in a compact 5-ball DSBGA package for ultra-small form factor designs. Available from authorized distributors worldwide with reliable stock and fast shipping.

AEC-Q100 qualified Hall-effect current sensor with 1% high precision and basic isolation, supporting up to 600V working voltage. Delivers accurate bidirectional current measurements without shunt resistors or opto-isolators. Available from Texas Instruments in stock with worldwide shipping.

The TPS7A1006PYKAR is an ultra-low dropout (LDO) linear voltage regulator from Texas Instruments with a fixed output voltage, 70mV maximum dropout voltage, and an input voltage range of 0.75V to 3.3V in a 5-ball DSBGA package. It delivers low-noise regulated output for powering sensitive analog and digital loads in compact portable designs. Available in stock from authorized distributors worldwide with reliable fast shipping.

Digital Bus Switch ICs 16B FET Bus Switch

The TPS22990DMLT is a single-channel resistor-controlled load switch from Texas Instruments, supporting 0.6 V to 5.5 V input voltage and up to 10 A continuous load current in a compact 10-pin DML package. An adjustable slew-rate resistor controls inrush current limiting, making it ideal for hot-swap and power sequencing circuits. Available in tape-and-reel with worldwide shipping for industrial, server, and high-current consumer power management applications.

1.5-A, negative, adjustable linear voltage regulator

The LM1117ILD-ADJ/NOPB is an adjustable 800mA low dropout linear voltage regulator from Texas Instruments, supporting input voltages from 2.6V to 15V with a typical 1.2V dropout voltage for flexible output voltage programming. Key specs include 800mA output current, adjustable output voltage, -40°C to 125°C industrial temperature range, and 8-pin WSON package. Available lead-free (NOPB) from global distributors in stock with worldwide shipping.

Texas Instruments TPS61202DRCT is a current-mode PWM boost switching regulator providing fixed 5V positive output with 1.2A switch current from a 0.3V to 5.5V input range in a compact 10-pin VFDFN exposed-pad package. Available from stock with worldwide shipping.

Display Drivers & Controllers DLP® 0.65 1080p s600 DMD 350-CPGA

Linear Voltage Regulator IC Positive Fixed 1 Output 50mA TO-252-3

Switching Voltage Regulators 4.2-V to 60-V, 1.5-A ultra-small synchronous step-down converter 12-VQFN-HR -40 to 150

Flip Flops Dual Master/Slave

Texas Instruments TUSB217ARWBRQ1 is a USB 2.0 high-speed signal conditioner with integrated DCP and CDP charging controllers in a 12-pin X2QFN package. Supports operating temperatures from -40 to 105°C for automotive-grade reliability. Available from authorized distributors with worldwide shipping.

TMS320VC5509AZAYR is a 16-bit fixed-point digital signal processor from Texas Instruments in 179-pin NFBGA package. Key specs include 20MHz max clock, 21-bit address bus, 1.2V/1.35V supply options, and -40 to 85°C temperature range. Available from stock with worldwide shipping.

The TL494CDBR is a versatile voltage-mode PWM controller IC from Texas Instruments supporting buck, boost, flyback, forward, full-bridge, half-bridge, and push-pull converter topologies with a 7 V to 40 V input range. It delivers up to 250 mA output current with precision pulse width modulation control in a compact 16-pin SSOP package. Available from stock worldwide with fast shipping for power supply design projects.

Battery Chargers 500-mA 1-cell linear charger with 10-nA IQ, power path, regulated system voltage, 16-bit ADC and LDO 20-DSBGA -40 to 85

The TPS22960RSER is a dual-channel high-side power switch from Texas Instruments with 0.5A current capacity and 0.848-ohm on-resistance per channel supporting 1.62V to 5.5V input range. It features two independent load switch channels in a compact 8-pin UQFN package ideal for space-constrained power management designs. Available from global distributors in tape-and-reel packaging with in-stock inventory for prompt worldwide delivery.

Board Mount Hall Effect/Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-TO-92 -40 to 125

The TPS7B8650QKVURQ1 is an automotive-grade 500mA ultra-low quiescent current LDO regulator from Texas Instruments with 40V input rating and power-good output in a 5-pin TO-252 package. It features only 0.37V typical dropout voltage and operates across a -40°C to 150°C temperature range. Available from stock worldwide with AEC-Q100 qualification for automotive designs.

The TPS78401QWDRBRQ1 is an automotive-qualified, adjustable ultra-low-dropout LDO voltage regulator from Texas Instruments with 115 mV typical dropout voltage and 1.65V to 6V input range. It delivers high PSRR and low noise output for sensitive analog and RF power rails in AEC-Q100 qualified automotive systems. Available in 8-pin WSON package with worldwide shipping.

The TPS62086RLTR is a 3A synchronous step-down DC-DC converter from Texas Instruments featuring DCS-Control for fast transient response, operating from a 2.5V to 6V input with adjustable output from 0.8V to 6V. It supports both PWM and PFM control modes for high efficiency across a wide load range, housed in a compact 7-pin QFN package. In stock from authorized distributors with worldwide shipping.

TXU0304RUTR is a unidirectional 4-channel voltage level translator from Texas Instruments' TXU family supporting up to 200 Mbps data rates. It operates with active-high enable control and a 5 pF load capacitance in a compact 12-pin UQFN (1.7x2 mm) package. Available in stock worldwide with competitive pricing and fast shipping.

TEXAS INSTRUMENTS - BQ51013ARHLR - INTEGRATED WIRELESS POWER SUPPLY RECEIVE