Integrated Circuit

Use the download button to access the AM6548BACDXEAF schematic symbol, PCB footprint, and 3D model.

TPS25865QRPQRQ1 is an automotive-grade dual 2.4 A USB Type-A charging port controller from Texas Instruments supporting 5.5 V to 26 V input with load shedding in a 25-pin VQFN-HR package. It meets AEC-Q100 qualification and operates from -40 degrees C to 125 degrees C for harsh environment use. Available from stock with worldwide shipping.

Battery Management Sync Switch-Mode Li-Ion Charger

Logic Gates Sngl 3 Inp Pos OR Gate

Texas Instruments TLV9022DSGR is a dual precision comparator with open-drain output in a compact 8-pin WSON package. It features a maximum input offset voltage of 1500 µV and operates over a temperature range of −40°C to +125°C. Available from stock with worldwide shipping.

The TMP114CIYMTR is an ultra-precise 16-bit digital temperature sensor from Texas Instruments with ±0.2 °C maximum accuracy. It communicates over a 2-wire I2C interface, draws only 1.5 µA during operation, and is housed in a tiny 0.758 mm × 0.758 mm BGA package for space-constrained IoT and wearable designs.

Battery Management 800-mA JEITA-compliant linear battery charger for 1-cell Li-Ion and LiFePO4

The TPS7A2133PYWDJ is a fixed 3.3 V, 500 mA positive LDO linear regulator from Texas Instruments with a 130 mV typical dropout voltage and 3.6 V to 6 V input range, housed in an ultra-compact 4-ball WCSP package measuring 0.63 mm x 0.63 mm. It delivers stable output with very low dropout for space-constrained portable and wearable applications. Available from stock worldwide with competitive pricing and fast shipping.

THS4082CDGN is a high-speed single-channel video amplifier from Texas Instruments in an 8-pin SOIC package. It delivers 175 MHz bandwidth and operates from ±5 V dual supply or a 10 V to 30 V single supply. Available from stock with worldwide shipping.

Digital Isolators General-purpose, quad-channel, 4/0 digital isolator

Switching Voltage Regulators SIMPLE SWITCHER power converter 4.2-V to 80-V, 2-A, synchronous buck with 40- uA IQ 8-SO PowerPAD -40 to 150

Digital to Analog Converters - DAC 12B,Dual,Lo Pwr Ultra-Lo Glitch DAC

Translation - Voltage Levels 4-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs 16-UQFN -40 to 85

LDO Voltage Regulators 1A LDO ADJ REG

HQCCN,

1• Operating temperature from –40°C to +125°C • Supports 5-V VCC operation • Inputs accept voltages to 5.5 V • Supports down translation to VCC • Max tpd of 3.4 ns at 3.3 V • Low power consumption, 10-µA max ICC • ±24-mA Output drive at 3.3 V • Typical VOLP (output ground bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (output VOH undershoot) >2 V at VCC = 3.3 V, TA = 25°C • Ioff Supports live insertion, partial-power-down mode, and back-drive protection • Latch-up performance exceeds 1

Battery Management 750mA SGL-CHIP Li- Ion/Li-Pol Chg Mgmt

RF Microcontrollers - MCU SimpleLink&trade;&nbsp;32 -bit Arm&reg;&nbsp;Cortex&reg;-M4 single-protocol 2.4-GHz wireless MCU 48-VQFN -40 to 105

TL2575HV-33QKTTRQ1 is a fixed 3.3 V, 1 A step-down switching regulator from Texas Instruments with a wide input voltage range of 4.75 V to 60 V in a TO-263-6 surface-mount package, designed for automotive and industrial power conversion. Available from stock worldwide with competitive pricing.

TXU0304BQAR is a unidirectional 4-channel voltage level translator from Texas Instruments supporting data rates up to 200 Mbps across mismatched logic rails. It translates logic levels in a single direction with an active-high enable pin and operates in a compact 14-pin WQFN (3x2.5 mm) package. Available from stock with worldwide shipping.

Isolated Module DC DC Converter 1 Output 5V 200mA 4.5V - 5.5V Input, 1W , 200mA , 1kV , -40°C ~ 85°C

Digital Isolators Low-emissions, low-ripple, quad-channel, 3/1, reinforced digital isolator with integrated power

200 mA nanopower LDO voltage regulator with only 200 nA quiescent current and an enable pin for power-gating. Fixed 0.9 V output operates from 1.5 V to 6 V input across -40°C to +125°C in a 5-pin SOT-23 package. From $0.38 in stock worldwide shipping.

The LMR38020SDDAR is a SIMPLE SWITCHER synchronous buck regulator from Texas Instruments supporting a 4.2V to 80V input range, 2A output current, and ultra-low 40uA quiescent current for efficient power conversion in an 8-pin small outline package.

Texas Instruments TCA39306DCURQ1 is an automotive-grade 2-bit bidirectional I2C and SMBus voltage level translator in an 8-pin VSSOP package, rated from -40°C to 125°C. It supports FM+ I2C bus speeds up to 1 MHz and enables communication between 1.0 V and 5.5 V voltage domains. In stock with worldwide shipping.

Motor / Motion / Ignition Controllers & Drivers 35-V, 2.5-A bipolar stepper driver with integrated current sensing & 1/256 microstepping 28-HTSSOP -40 to 125

TL720M05QKTTRQ1 is a fixed 5 V automotive-grade low-dropout linear voltage regulator from Texas Instruments in a TO-263 3-pin package. It accepts input voltages from 5.5 V to 42 V with a maximum dropout of 0.5 V and meets AEC-Q100 qualification for automotive applications. Available from stock worldwide with fast shipping.

Use the download button to access the LM137H/NOPB schematic symbol and PCB footprint.

TMCS1107A1BQDT is a galvanically isolated Hall-effect current sensor from Texas Instruments with 420 V reinforced isolation and internal reference. It provides an analog voltage output proportional to current, operates from -40°C to +85°C, and fits an 8-pin SOIC package. Available from stock with worldwide shipping.

TMUX7462FRRPR is a 4-channel fault-protected analog switch with ±60 V fault protection, latch-up immunity, and 1.8 V logic compatibility. Key specs include 500 MHz bandwidth, -5 V to -22 V negative supply range, and adjustable fault threshold. In stock worldwide with fast shipping in a 16-pin QFN package.

Analog to Digital Converters - ADC Eight-channel, 800-kSPS, 16-bit SAR analog-to-digital converter (ADC) with GPIOs and SPI 16-DSBGA -40 to 125

IC REG LINEAR 5V 500MA TO252-3

Battery Management 3-series to 7-series cell Li-ion battery, internal delay timer, voltage and temperature protector

Texas Instruments LM2575HVT-ADJEP is a SIMPLE SWITCHER 1A adjustable step-down voltage regulator in TO-220-5 package, accepting inputs up to 60 V with pulse-width modulation voltage-mode control. Available from stock with worldwide shipping.

Clock Buffer Dual bank 4-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer

Switching Voltage Regulators 1A STEP-DOWN VLTG REG

Operational Amplifiers - Op Amps 40-V, single 10-MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp 6-SOT-23 -40 to 125

PDRV8243HRXYQ1 is an AEC-Q100 qualified automotive H-bridge motor driver with integrated current sense and diagnostic reporting, designed for 12 V automotive systems. It delivers up to 3 A continuous output current with overcurrent, thermal shutdown, and fault reporting diagnostics. Available from stock with worldwide shipping.

SNJ54LS181J is a 4-bit arithmetic logic unit from Texas Instruments capable of 16 logic and arithmetic operations in a military-grade 24-pin CDIP package. Features internal carry and higher-order lookahead with 15 pF load capacitance. Available from stock worldwide with fast shipping.

12 Bit Digital to Analog Converter 1 6-WSON (2.2x2.5)

Trans GP BJT NPN 35V 0.02A 6-Pin TO-99 Box

TMCS1107A2UQDT is a 420 V isolated Hall-effect current sensor IC in an 8-pin SOIC package, operating from -40°C to 85°C. It features galvanic isolation with an internal voltage reference and analog voltage output proportional to measured current. Suitable for motor drives, power inverters, and high-voltage industrial current monitoring applications.

The TPS54227DRCT is a 2 A synchronous step-down DC-DC converter accepting 4.5 V to 18 V input and delivering an adjustable 0.76 V to 7 V output. It integrates pulse-width modulation control with voltage-mode feedback in a compact SON-10 package, enabling high-efficiency point-of-load regulation. Available from stock worldwide with competitive pricing.

Current Sense Amplifiers 40-V, bidirectional, high-precision current sense amplifier with picoamp input bias & ENABLE 6-DSBGA -40 to 125

Texas Instruments TDP0604IRNQR is a 4-channel DisplayPort++ HDMI 2.0 redriver IC supporting up to 6 Gbps per lane in a 40-pin QFN package. It restores signal integrity on high-speed display links for consumer electronics and docking station designs.

TMAG5170A2EDGKRQ1 is an AEC-Q100 Grade 1 automotive linear 3D Hall-effect magnetic sensor with 12-bit resolution and SPI interface, operating from 2.3 V to 3.6 V supply over -40°C to +150°C temperature range. Designed for precise angle, position, and rotation sensing in automotive and industrial applications.

Texas Instruments TPS6286820CRQYR is an automotive-qualified synchronous buck converter delivering 4A output current from a 2.4V to 5.5V input with adjustable output down to 0.8V. It combines PWM and PFM control modes for high efficiency across load ranges in a 9-ball PowerVFQFN package. Available from stock with worldwide shipping.

Logic Gates Quad Positive-NAND Gate

Motor / Motion / Ignition Controllers & Drivers 40-V max, 8-A peak, sensorless FOC control 3-phase BLDC motor driver

Texas Instruments XDRA821UXXGALM is a high-speed integrated circuit in a 433-ball FCBGA package operating at 2000 MHz with supply voltage range of 0.76 V to 0.84 V, designed for high-performance digital processing applications requiring fine-pitch BGA assembly.