Integrated Circuit

SOIC-20

The PTPS7A9401DSCR is a 1A ultra-low noise, ultra-high PSRR adjustable RF LDO voltage regulator from Texas Instruments with input voltage range of 1.7V to 5.7V and typical dropout of 150mV. Packaged in a 10-pin PDSO for RF and wireless applications. Available from stock worldwide with fast shipping.

Board Mount Hall Effect / Magnetic Sensors Linear hall effect sensor with digital PWM output 3-TO-92 -40 to 125

TPS6285021HQDRLRQ1 is an automotive-grade current-mode PWM/PFM buck switching regulator by Texas Instruments in an 8-pin flat-lead package. It operates from 2.7 V to 6 V input with 5 V nominal, featuring automatic PWM/PFM mode switching for high efficiency across light and heavy loads. Designed for automotive infotainment, ADAS sensor rails, and battery-powered embedded systems.

Current & Power Monitors & Regulators 28-V, 12-bit, I C output current/voltage/power monitor with alert in WCSP 8-DSBGA -40 to 125

The TPS2103DBVRG4 is a single-channel source-select OR controller and load switch from Texas Instruments. It provides automatic power-path management with a controlled turn-on slew rate, 2.7 V to 5.5 V input range, and 500 mA continuous output current in a SOT-23-5 package. RoHS-compliant, available from stock with worldwide shipping.

Texas Instruments UC385T-2 is a high-current fixed positive linear voltage regulator capable of delivering 5A output current with an ultra-low dropout voltage of 0.35V nominal. It accepts input voltages from 1.7V to 7.5V, making it ideal for low-headroom power supply designs. Available from stock worldwide with fast shipping.

TMP114NBIYMTR is a high-accuracy 16-bit digital temperature sensor in a tiny 0.76 mm BGA package, with ±1°C maximum accuracy and I2C/SMBus 2-wire interface. It draws only 1.5 µA operating current and supports programmable alert thresholds for temperature monitoring applications. Suited for wearables, IoT nodes, and space-constrained portable devices requiring precise thermal monitoring.

The TPS25970LRPWR is a single-channel eFuse IC with a 2.7 V to 23 V input range, 10 mΩ integrated FET, and 7 A continuous current capability featuring fast overvoltage and overcurrent protection with adjustable thresholds. It replaces discrete hot-swap controller circuits in a compact 10-pin QFN package for space-constrained power protection designs. Available from global distributors with worldwide shipping.

Low-Voltage, High-Speed Quadruple Differential Line Receiver

SOIC-20

Logic Gates 4-ch, 2-input, 2-V to 6-V low power AND gates with Schmitt-Trigger inputs 14-WQFN -40 to 125

Use the download button to access the LM4952TSX/NOPB schematic symbol and PCB footprint.

Texas Instruments TLV7103318DSET is a dual-output, 200 mA fixed 1.8 V LDO regulator with low noise and high PSRR in a 6-pin SOT-23 package. Accepts 2 V to 5.5 V input and delivers 150 mV typical dropout at full load. Available in stock worldwide with fast shipping.

SON-12

RS-422/RS-485 Interface IC

Operational Amplifiers - Op Amps Dual, 40-V, 10-MHz, low-power operational amplifier

Texas Instruments TLV3801DSGT is a single high-speed analog comparator with a 5000 µV maximum input offset voltage and 10 µA bias current. It features a fast propagation delay suitable for threshold detection and signal conditioning. Supplied in an 8-pin SON package with RoHS e3 rating and worldwide availability.

Precision Amplifiers Ultra-high precision (2 V), zero-drift (0.003 V/C), low-input-bias-current op amp (quad) 14-TSSOP -40 to 125

TCA9537DGSR is a 4-bit I2C-bus and SMBus I/O expander with interrupt output, featuring 400 kHz fast-mode I2C, configurable I/O direction per pin, and active-low interrupt. Designed for low-voltage 1.65 V to 5.5 V systems in VSSOP-10 package targeting embedded control and industrial automation.

Operational Amplifiers - Op Amps Dual, 40-V, 10-MHz, low-power operational amplifier

Digital to Analog Converters - DAC 16-channel 16-bit high-voltage output DAC with integrated internal reference 40-VQFN -40 to 125

The TLV3801DSGR is a high-speed single voltage comparator from Texas Instruments in an 8-pin WSON package, featuring a 5000 µV maximum input offset voltage, 10 µA bias current, and open-drain output for flexible logic interfacing. It is designed for line receivers, zero-crossing detectors, and window comparator circuits in 3.3 V or 5 V embedded systems.

Operational Amplifier, Single AMP, CMOS, 6 Pin, Plastic, TSOP

Buffer, Non-Inverting 2 Element 4, 2 Bit per Element 3-State Output 16-WQFN (2.5x3.5)

Board Mount Current Sensors 100-V Hall-effect current sensor with internal reference 8-SOIC -40 to 85

PINA296A2IDDFR is a 4-V 110-V amplifier by Texas Instruments. Key specs: 4-V, 110-V, 1-MHz. From quote-based pricing, in stock with worldwide shipping for production sourcing.

Board Mount Current Sensors AEC-Q100, +/-100-V isolated Hall-effect current sensor with internal reference 8-SOIC -40 to 125

Analog to Digital Converters - ADC 16-bit 240SPS 2 Ch Diff

Use the download button to access the LM317HVH schematic symbol and PCB footprint.

Board Mount Hall Effect/Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-TO-92 -40 to 125

Digital to Analog Converters - DAC 12B,Dual,Lo Pwr Ultra-Lo Glitch DAC

Flip Flops Tri-State Octal

TL1963A-25KTTR is a fixed 2.5 V, 1.5 A low-dropout LDO regulator from Texas Instruments with low noise and fast transient response, accepting 3 V to 20 V input and housed in a 5-pin SOT-223 package for powering noise-sensitive analog and RF loads in consumer and industrial applications.

UCC27424DGNR is a dual-channel non-inverting low-side MOSFET gate driver by Texas Instruments in an 8-pin HVSSOP package. It provides totem-pole outputs for driving two independent power switches with standard input logic compatibility and strong gate current capability. Designed for DC-DC converters, motor drives, and synchronous rectification circuits requiring reliable MOSFET gate control.

16-bit Microcontrollers - MCU Ultra Lo Pwr MCU

The TPS7A0233PYCHR is a fixed 3.3 V, 200 mA nanopower LDO voltage regulator from Texas Instruments featuring an ultra-low quiescent current of only 25 nA and a typical 205 mV dropout voltage. It accepts an input voltage from 1.5 V to 6 V with an enable pin for power sequencing, housed in a miniature 4-pin DSBGA package measuring under 1 mm². The device is optimized for always-on IoT nodes, wearables, and energy-harvesting designs where maximizing battery life under light-load conditions is critical.

Use the download button to access the DAC43204RTER schematic symbol, PCB footprint, and 3D model.

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 5V 4A 2.95V - 5.5V Input , 2.95V , 5.5V , -40°C ~ 125°C

Logic Gates Automotive, 4-ch, 2-input 2-V to 6-V high-speed (12 ns) AND gate with Schmitt trigger inputs 14-SOT-23-THIN -40 to 125

The TPS75825KTTR is a fixed 2.5V, 1A low-dropout LDO regulator by Texas Instruments with a 150mV typical dropout and 5.5V maximum input. It features fast transient response and ultra-low quiescent current for portable systems. Available from stock with worldwide shipping.

LDO Voltage Regulators 800-mA, low-VIN (0.875-V), ultra-low-dropout voltage regulator with enable 5-DDPAK/TO-263 -40 to 125

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 2A 11-PowerVFQFN , 1.5MHz ~ 2.5MHz , -40°C ~ 125°C (TJ)

TPS61028DRCR is a current-mode PWM boost switching regulator from Texas Instruments with 0.9V to 6.5V input range and adjustable output up to 5.5V. It operates in a compact 10-Pin SON package ideal for battery-powered applications. Available from stock with worldwide shipping.

Use the download button to access the ISO6742DWR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LM2904BTQPWRQ1 schematic symbol, PCB footprint, and 3D model.

The TPS629210DRLR is a high-efficiency synchronous buck converter from Texas Instruments operating from 3V to 17V input with 1A output current. It features ultra-low quiescent current and PWM/PFM control modes for optimal efficiency across load ranges. From $0.80, available in stock with worldwide shipping.

The TIOL1123DRCR is an IO-Link transceiver IC from Texas Instruments with an integrated 3.3V LDO output. It supports the IO-Link communication standard and is housed in a compact 10-pin WSON/QFN package (S-PDSO-N10). Lead-free and RoHS compliant, it is designed for industrial sensor and actuator interfaces in factory automation systems.

TPS22992RXPR is a single-channel load switch IC from Texas Instruments supporting 0.1 V to 5.5 V input, integrated in an 8-pin QFN package with Pb-free construction for power sequencing and distribution control. From $0.60 in stock worldwide shipping.

The TPS7A2128PYWDJ is a 500 mA low-noise, low-IQ, high-PSRR LDO voltage regulator by Texas Instruments. Key specs: 2.8 V fixed output, 130 mV typical dropout voltage, 3.1 V to 6 V input range. Available from stock with worldwide shipping.