Integrated Circuit

Digital Isolators Automotive, general-purpose, quad-channel, 4/0 digital isolator

Isolation Amplifiers Automotive 2-V-input reinforced isolated amplifier with high CMTI for current sensing

Buffers & Line Drivers Schmitt-trigger inputs quadruple bus buffer gates with 3-state outputs

Board Mount Hall Effect / Magnetic Sensors 2.5 to 38 V 3-TO-92 -40 to 125

Digital Isolators Low-emissions, low-ripple, quad-channel, 2/2, reinforced digital isolator with integrated power

LM66100QDCKRQ1 is a Texas Instruments AEC-Q100 qualified input fault protection controller (ideal diode controller) in a 6-pin SOT23 package, operating from 1.5 V to 5.5 V and supporting one channel for automotive power-path protection.

Operational Amplifiers - Op Amps 300 mA High Speed Buffer with Adjustable Current Limit 7-DDPAK/TO-263 -40 to 125

LED Lighting Drivers 2 18 LED matrix driver with 8-bit analog and 8-/16-bit PWM dimming

Analog to Digital Converters - ADC Automotive 16-bit, 32-kSPS, four-channel, simultaneous-sampling, delta-sigma ADC

Texas Instruments TLV9032PWR is a dual-channel precision comparator with push-pull output, 1.5 mV maximum input offset voltage, and 5 nA maximum bias current in an 8-pin SOIC package. It operates from a single 1.8 V to 5.5 V supply with rail-to-rail input range for accurate threshold detection. Available from stock with worldwide shipping.

LM336-2.5 2.5-V Integrated Reference Circuit

TPS82672SIPR is a high-efficiency step-down DC-DC converter from Texas Instruments operating at 5.5 MHz with 2.3 V to 4.8 V input range in a compact BGA-8 package. It achieves up to 90% efficiency using pulse-width modulation and pulse-frequency modulation control. Available from stock with worldwide shipping.

-40°C ~ 125°C Battery Battery Monitor IC Lithium Ion 64-HTQFP (10x10)

Low-emissions, low-ripple, quad-channel, 0/4, reinforced digital isolator with integrated power

Digital Isolators Low-emissions, low-ripple, quad-channel, 0/4, reinforced digital isolator with integrated power

TLV9032QDGKRQ1 is an automotive-grade dual push-pull comparator operating from 1.65 V to 5.5 V supply with ±1500 µV max input offset voltage and 5 nA max bias current. Available in VSSOP-8 package for compact PCB designs. In stock worldwide with competitive pricing.

PLASTIC, DIP-8

The LMR54406 is a SIMPLE SWITCHER synchronous buck converter from Texas Instruments, supporting 4.5 V to 36 V input and delivering up to 0.6 A output current with an ultra-low 80-µA quiescent current. It integrates high-side and low-side MOSFETs for high efficiency in space-constrained designs. Available in stock worldwide with competitive pricing and fast shipping.

TMP127EDBVRQ1 is an automotive-grade 14-bit digital temperature sensor from Texas Instruments with SPI interface. It features ±0.8°C maximum accuracy over a -55°C to 150°C range. Available in a compact SOT-23 6-pin package, AEC-Q100 qualified, from $1.20 in stock worldwide shipping.

TMP421YZDT is a dual-channel remote and local temperature sensor IC with 12-bit resolution and 2-wire interface. Offers up to ±2.5°C accuracy across a -40°C to +125°C operating range. Available from Texas Instruments in compact DSBGA package with worldwide shipping.

REF2033QDDCRQ1 is a precision 3.3 V voltage reference IC from Texas Instruments in a compact SOT-23-5 package. It supports input voltages from 2.52 V to 5.5 V and delivers up to 20 mA output current with low dropout. Available from stock with worldwide shipping.

TEXAS INSTRUMENTS - LMZ14201EXTTZ/NOPB - DC/DC POL Converter, Adjustable, Buck & Synchronous Buck, 1 MHz, 800 mV to 6 V out, 1 A, TO-PMOD-7

TLV9164IPWR is a quad rail-to-rail output op-amp from Texas Instruments with 1 MHz bandwidth, 75 dB CMRR, and 1000 µV max input offset voltage. Available in a compact SOIC-14 package with industrial temperature range support. In stock globally with worldwide shipping.

Clock Generators & Support Products Ultra-low power clock generator with one PLL, four differential output 24-VQFN -40 to 85

Clock Generators & Support Products Ultra-low power clock generator with one PLL, four differential output 24-VQFN -40 to 85

TLV1117CKTTR is a low-dropout linear voltage regulator delivering up to 0.8A output current with adjustable output from 1.25V to 13.7V. Features a low 1.2V typical dropout voltage and 2.7V to 15V input range. Available from Texas Instruments in a 4-pin DDPAK surface-mount package with worldwide shipping.

Board Mount Hall Effect/Magnetic Sensors Auto Analog-Bipolar Hall Effect Sensor

Three-phase sensorless brushless DC motor controller with integrated gate drivers and 180-degree sinusoidal commutation. Supports motor supply voltages from 1.5 V to 7 V. From $0.89 in stock worldwide shipping.

TEXAS INSTRUMENTS - TLV1117CKVURG3 - LDO Voltage Regulator, Adjustable, 2.7V to 15V in, 1.2V drop, 1.25V to 13.7V/0.8A out, TO-252-3

1-ch, 3-input 1.65-V to 5.5-V 32 mA drive strength AND gate

Motor / Motion / Ignition Controllers & Drivers Automotive 40-V max, 8-A peak, sensored trapezoidal control 3-phase BLDC motor driver

TPS25974LRPWR is a single-channel eFUSE protection IC from Texas Instruments supporting 2.7 V to 23 V input with adjustable overcurrent threshold. It integrates overvoltage, undervoltage, and reverse-current protection in a compact 10-pin QFN package. Available from stock worldwide with competitive pricing.

RF Microcontrollers - MCU SimpleLink Arm Cortex -M4F multiprotocol 2.4-GHz wireless MCU, 704-kB Flash, integrated power amp

Use the download button to access the LMR51430XFDDCR schematic symbol, PCB footprint, and 3D model.

Multiphase Motor Driver NMOS SPI 40-VQFN (7x5)

The TPS79928YZUR is a fixed 2.8 V low-dropout linear regulator delivering 200 mA output current with only 100 mV nominal dropout voltage in a compact 5-pin DSBGA package. It operates from a 2.975 V to 6.5 V input supply with CMOS logic-compatible enable control and features low quiescent current for battery-powered designs. Available in tape-and-reel packaging for automated assembly, it is RoHS-compliant and supports worldwide shipping.

Texas Instruments THVD1426DRLR is a 3.3V to 5V, 12-Mbps half-duplex RS-485/RS-422 transceiver with automatic direction control and plus-minus 12-kV IEC ESD protection. Features differential Schmitt-trigger inputs and a compact SOT-23 flat-lead package. Available from stock with worldwide shipping.

Use the download button to access the DRV8251ADDAR schematic symbol, PCB footprint, and 3D model.

TMS28F400AEB80CDBJL is a 4 Mbit (256K x 16 or 512K x 8) auto-select boot-block Flash memory from Texas Instruments. Features 80 ns access time, bottom boot block architecture, 100,000 write/erase cycles endurance, and 5 V operation. Available in 44-pin TSOP package with worldwide shipping.

TMP114BIYMTR is a high-accuracy 16-bit digital temperature sensor with ±0.2°C max accuracy and a 2-wire I2C interface, housed in a 0.758 mm × 0.758 mm WCSP package for space-constrained designs. Operating current is only 1.5 µA max for energy-efficient applications. Available in stock worldwide with fast global shipping.

Use the download button to access the BQ27Z746YAHR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the OPA182IDR schematic symbol, PCB footprint, and 3D model.

Texas Instruments PDRV8244HRYJQ1 is an AEC-Q100-qualified automotive gate driver IC rated from -40°C to +125°C for reliable motor and power-stage control. It provides high-current gate drive outputs suited for multi-phase brushless DC motor inverters in automotive powertrains. Available in stock worldwide with competitive lead times.

Switching Voltage Regulators Automotive 3.8-V to 36-V, 3-A synchronous step-down voltage converter 12-VQFN-HR -40 to 125

The TPS62932DRLR is a current-mode synchronous buck converter from Texas Instruments, accepting 3.8 V to 30 V input and using pulse-width modulation control for efficient step-down conversion in a compact 8-pin WSON package. It targets space-constrained industrial and telecom power supplies. Available in stock worldwide with competitive pricing and fast shipping.

Texas Instruments INA241A1 is a current-sense amplifier in SOT-23 package with a wide common-mode voltage range of −4 V to +110 V. It features a fixed gain of 20 V/V and operates from a 2.7 V to 5.5 V supply, delivering accurate bidirectional current measurements. Available from stock with worldwide shipping.

The LM4863LQ/NOPB is a dual-channel audio power amplifier from Texas Instruments delivering 2.7 W per channel with a 20 kHz bandwidth and 98 dB signal-to-noise ratio. It operates from a single supply for bridge-tied load or stereo single-ended speaker configurations, housed in a 24-pin QFN package. Designed for portable consumer electronics requiring compact, high-quality stereo amplification.

Texas Instruments BQ76PL455A-Q1 is an automotive-grade 16-cell battery monitor and protector IC in a QFP package. Monitors cell voltages and temperatures with 16-bit ADC resolution, supports daisy-chain communication up to 16 devices for large EV battery packs. Available in stock with worldwide shipping.

Shunt Voltage Reference IC Fixed 10V V ±0.1% 15 mA TO-92-3

TPS7A4433DGQR is a fixed 3.3 V low-dropout linear regulator from Texas Instruments supporting input voltages up to 65 V and a maximum output current of 50 mA. It features ultra-low dropout voltage of 0.6 V typical and operates across a wide input range ideal for industrial and automotive power rails. Available in a 10-pin MSOP-PowerPAD package with excellent PSRR for noise-sensitive designs. From competitive pricing in stock worldwide shipping.