Integrated Circuit

MCP4011-503E/MS is a single-channel 50 kΩ volatile digital potentiometer by Microchip, controlled via a 2-wire Up/Down interface in an MSOP-8 package. Features 64 wiper positions with 0.2 kHz bandwidth and 5V operation. Ideal for calibration and gain adjustment circuits. From $0.85, in stock, worldwide shipping.

The MCP619-I/P is a quad operational amplifier from Microchip featuring a PNP input stage that operates from a 2.3 V single supply. It provides 100 dB typical CMRR, 5 nA maximum input bias current, and rail-to-rail output capability in a 14-pin DIP package for portable and battery-powered signal conditioning.

MCP201-I/P is a single-channel voltage supervisor IC from Microchip in an 8-pin DIP package, providing precise undervoltage reset detection for 3.3 V and 5 V microcontroller systems. It asserts an active-low RESET signal during power-up and brownout events. Available in RoHS-compliant PDIP-8 with worldwide distribution.

Microchip MCP2155-I/P is an infrared encoder/decoder IC in an 18-pin DIP package, supporting SIR-compatible IrDA transmit and receive up to 115.2 kbps. Compact single-function design enables low-cost IR communication in embedded systems with worldwide shipping.

Microchip MCP42050-E/P is a dual-channel 8-bit digital potentiometer with SPI interface providing 50 kΩ end-to-end resistance and 256 wiper positions per channel. Operating from 2.7 V to 5.5 V supply with 3-wire serial control in a 14-pin PDIP package. Available from stock with worldwide shipping for volume orders.

93LC46A/P is a 1 Kbit Microwire-compatible serial EEPROM from Microchip in an 8-pin PDIP package. It supports up to 2 MHz clock, 1 million write/erase cycles, and 200-year data retention for reliable embedded configuration storage.

Microchip MCP2140-I/SO is an IrDA infrared communications controller operating up to 5.5 V supply, housed in an 18-pin SOIC package, providing full IrDA physical layer protocol support for wireless serial data transfer in portable and consumer electronics devices.

Microchip MCP4231-503E/P is a dual-channel SPI digital potentiometer with 50 kΩ end-to-end resistance and 256 wiper positions. Features increment/decrement control interface and wide 1.8 V to 5.5 V operating range. Available from stock worldwide with fast shipping.

The MCP131-450E/TO is a single-channel voltage supervisor and microcontroller reset IC from Microchip, with a fixed threshold of 4.38 V. It monitors supply voltage and asserts a reset output when VCC falls below the threshold, ensuring reliable system startup and brownout protection. Available in the compact TO-92-3 through-hole package from global authorized distributors.

DSPIC30F2011-20I/P is a 16-bit digital signal controller from Microchip with a 40 MHz DSP core, hardware barrel shifter, and fixed-point arithmetic in an 18-pin PDIP package. Available from stock with worldwide shipping.

MCP1318MT-46LE/OT is a single-channel Voltage Supervisor and Reset IC in SOT-23-5 package from Microchip. Features a fixed 4.6 V detection threshold with no external components needed for reliable power-on and brownout reset supervision. Available from stock with worldwide shipping.

Microchip MCP130-475FI/TO is a single-channel voltage supervisor and microcontroller reset IC with a 4.75 V trip threshold and an internal 5 kOhm pull-up resistor in a TO-92-3 through-hole package. It holds the reset output low when VCC falls below 4.75 V to ensure clean microcontroller startup and brownout protection. Available from stock worldwide with fast shipping.

Microchip MCP4141-502E/P is a single-channel, 7-bit SPI digital potentiometer with 5 kΩ end-to-end resistance, operating from 1.8 V to 5.5 V, ideal for audio, instrumentation, and calibration circuits.

Microchip dsPIC33FJ64MC508 is a 16-bit digital signal controller with 64 KB Flash, 8 KB RAM, and a 40 MIPS performance core. Features motor control PWM, QEI, and 12-bit ADC. Available from stock with worldwide shipping.

Microchip 93AA46AT-I/OT is a 1K-bit Microwire-compatible serial EEPROM in a compact SOT-23-6 package operating at up to 3 MHz clock. Offers 1 million write/erase cycles and 200-year data retention for reliable non-volatile storage. RoHS compliant and available in tape and reel for automated PCB assembly.

Microchip MCP2140A-I/P is an IrDA Standard Controller supporting DTE and DCE modes in an 18-pin DIP package. It features integrated IR encoder/decoder with baud rates up to 115.2 kbps. Available from stock worldwide with competitive pricing.

MCP1825-1802E/AT is a fixed 1.8 V, 500 mA LDO linear voltage regulator from Microchip featuring ultra-low 210 mV typical dropout voltage and 6 V maximum input. Designed for portable and embedded systems, it provides stable power with fast transient response and only 120 µA quiescent current. Available in a compact TO-220-5 package for easy integration into space-constrained designs.

Microchip dsPIC33FJ256MC710-I/PF is a 16-bit digital signal controller with 256 KB flash, 64 MHz maximum clock, and motor control peripherals in a 100-pin TQFP package. It integrates DSP fixed-point math, barrel shifter, and boundary scan for advanced embedded motor control. Available in stock with worldwide shipping.

16-Bit Digital Signal Controllers

The MCP103T-475E/TT is a micropower single-channel voltage supervisor from Microchip with a fixed threshold and SOT-23-3 packaging. It monitors supply voltages and generates a reset signal to protect microcontrollers during power-up or brownout events. From $0.35, in stock worldwide shipping.

The DSPIC33FJ64GP710-I/PT is a 16-bit digital signal controller from Microchip, running at up to 64 MHz with 64 KB Flash, fixed-point DSP engine, DMA channels, and ADC. It is offered in a 100-pin TQFP package for motor control and power conversion designs worldwide.

The MCP131-300E/TO is a single-channel voltage supervisor and microcontroller reset IC from Microchip with a fixed 2.93 V threshold, active-low reset output, and single-supply operation. Housed in a 3-pin TO-92 through-hole package for cost-effective system protection. From $0.50 in stock with worldwide shipping.

Microchip DSPIC30F2010-20I/SO is a 16-bit digital signal controller in a 28-pin SOIC package. It runs at up to 40 MHz clock frequency with a built-in ADC and barrel shifter for real-time motor control. Available from stock with worldwide shipping.

Microchip MCP1601-I/MS is a voltage-mode PWM switching regulator with 2.7 V to 5.5 V input range supporting PFM operation. Delivers regulated DC output in a compact MSOP-8 package with high efficiency for battery-powered applications. RoHS-compliant and available with worldwide shipping.

2K Microwire Compatible Serial EEPROM

The MCP101-315HI/TO is a single-channel microcontroller voltage supervisor and reset IC by Microchip, with a fixed 3.15 V threshold, 45 µA supply current, and 5.5 V maximum supply. Housed in a TO-92-3 through-hole package, it provides reliable power-on reset generation for microcontrollers and digital systems requiring voltage monitoring.

The HCS360-I/SN is a Microchip KEELOQ code hopping encoder IC delivering rolling-code security for remote keyless entry and access control systems. It generates a 66-bit encrypted transmission with a unique 64-bit serial number and operates in an 8-pin SOIC package rated for 260°C peak reflow. Available from stock worldwide with competitive pricing.

The DSPIC30F6013-20I/PF is a 16-bit digital signal controller from Microchip with a 40 MHz clock, fixed-point DSP engine, barrel shifter, and 80-pin TQFP package. It operates down to 2.5 V at 7.5 MHz, combining MCU peripherals with DSP processing for embedded control.

1K Microwire Compatible Serial EEPROM

Microchip dsPIC33FJ32MC302 is a 16-bit digital signal controller with a 40 MHz DSC core, 32 KB Flash, hardware floating point, and motor control PWM with encoder interface. Available in QFN-28 package, RoHS compliant, in stock with worldwide shipping.

The Microchip DSPIC30F6013-30I/PF is a 16-bit digital signal controller with 132 KB of flash memory and a 40 MHz maximum clock frequency, housed in an 80-pin TQFP package. It combines DSP fixed-point math acceleration with MCU peripherals including multiple internal buses and a hardware barrel shifter for embedded control applications. Available in stock worldwide with fast shipping.

Microchip DSPIC30F6012-20I/PF is a 16-bit digital signal controller with 144KB Flash, barrel shifter, fixed-point DSP engine, and 40 MHz instruction rate in a 64-pin TQFP package, operating from 2.5V to 5.5V supply. Available from stock worldwide with fast shipping.

Microchip dsPIC33FJ06GS102-I/SP is a 16-bit digital signal controller with 50 MHz clock, fixed-point DSP engine, and boundary scan. Available in SPDIP-28 package with multiple internal bus architecture for high-performance embedded control.

DSPIC33FJ16GS402-I/SP is a 16-bit dsPIC33F digital signal controller from Microchip running at up to 50 MHz, integrating 16 KB flash, a barrel shifter, boundary scan, and a multiple internal bus architecture. Housed in a 28-pin SPDIP package, it serves power conversion and embedded control applications.

DSPIC30F6011-30I/PF is a 16-bit Microchip dsPIC30F digital signal controller with 40 MHz clock, fixed-point DSP engine, barrel shifter, multiple internal buses, and 64-pin TQFP package, also operable from a 2.5 V minimum supply at 7.5 MHz for low-power embedded DSP applications. From $5.50 in stock worldwide shipping.

DSPIC30F3014-30I/P is a 16-bit digital signal controller from Microchip with a 40 MHz clock, hardware barrel shifter, and fixed-point DSP engine. Operates from 2.5 V minimum at 10 MHz in a PDIP-40 package. From $5.00 in stock with worldwide shipping.

The 25LC256-I/STG is a 256 Kbit SPI-compatible EEPROM from Microchip in an 8-pin SOIC package, supporting up to 10 MHz clock speed, 1,000,000 write/erase cycles, and 200-year data retention for reliable non-volatile storage.

The dsPIC30F6011-20I/PF is a 16-bit digital signal controller with 40 MHz maximum clock and fixed-point DSP engine. It features a barrel shifter, multiple internal buses, and operates from 2.5 V minimum supply. Available in QFP-64 package for industrial embedded control and motor-drive applications.

Microchip DSPIC30F3010-20I/ML is a 16-bit digital signal controller with 40 MHz clock, 24 KB flash, and 1 KB RAM in a QFN-44 package. Supports fixed-point DSP and also operates at 2.5 V minimum supply at 7.5 MHz. From $2.50, in stock, worldwide shipping.

The Microchip DSPIC30F3014-20I/P is a 16-bit digital signal controller with a 40 MHz clock, fixed-point DSP core, barrel shifter, and boundary scan in a 40-pin PDIP package. It operates down to 2.5 V at 7.5 MHz for low-power embedded signal processing. Available from stock worldwide with competitive pricing.

Microchip DSPIC30F3013-20I/SO is a 16-bit fixed-point digital signal controller running up to 40 MHz with barrel shifter and DSP math hardware in a 28-pin SOIC package. It also operates at 2.5 V supply at 7.5 MHz for low-power embedded signal processing. Available from stock with worldwide shipping.

128K I2C CMOS Serial EEPROM

Microchip dsPIC30F3011-20I/PT is a 16-bit digital signal controller running at up to 20 MIPS with 48 KB flash, 2 KB SRAM, and a 10-bit ADC in a 44-pin TQFP package. Integrates motor-control PWM, CAN 2.0B, UART, SPI, and I2C peripherals for embedded DSP applications. Available from stock with worldwide shipping.

DSPIC30F2011-20I/SO is a 16-bit digital signal controller from Microchip running at up to 40 MHz with a barrel shifter and fixed-point DSP engine for real-time signal processing. It operates down to 2.5 V at 7.5 MHz and comes in an 18-SOIC package. Available from stock with worldwide shipping.

93C46BT-I/SN is a 1 Kbit Microwire-compatible serial EEPROM from Microchip with up to 3 MHz clock frequency, 1,000,000 write/erase cycle endurance, and over 200 years of data retention. It interfaces via a simple 3-wire Microwire serial protocol in a compact SOIC-8 package. Available RoHS-compliant with global distribution.

8-megabit 2.7-volt Minimum SPI Serial Flash Memory

8-bit Microcontrollers - MCU 64KB Flash, 4KB RAM, 256B EEPROM, 10-bit ADC2, 5-bit DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, SPI/I2C, IDLE/DOZE/PMD

EEPROM Memory IC 8Kbit Microwire 3 MHz 8-PDIP

0.300 INCH, LEAD FREE, PLASTIC, DIP-14

93LC66C-I/P is a 4 Kbit serial EEPROM from Microchip with 2 MHz clock, 1,000,000 write/erase endurance cycles, and minimum 200-year data retention. Available in a through-hole 8-pin PDIP package for easy prototyping and repair. In stock with worldwide shipping.