DSPIC30F2011-20I/P Microchip Integrated Circuit (Dual-In-Line Packages) In Stock
DSPIC30F2011-20I/P is a 16-bit digital signal controller from Microchip with a 40 MHz DSP core, hardware barrel shifter, and fixed-point arithmetic in an 18-pin PDIP package. Available from stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Dual-In-Line Packages
- Pin Count
- 18
- Lifecycle
- ACTIVE
- Datasheet
- DSPIC30F2011-20I/P Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $3.4800(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 16-bit dsPIC30F core running at up to 40 MHz with hardware barrel shifter and fixed-point DSP engine for motor-control algorithms
- Dual operating modes: full speed at 5 V / 40 MHz or low-power at 2.5 V / 7.5 MHz for energy-constrained applications
- 18-pin PDIP through-hole package enabling breadboard prototyping and easy replacement in legacy industrial control boards
Applications
The DSPIC30F2011-20I/P is designed for compact motor-control and digital signal processing tasks such as BLDC commutation, sensor signal filtering, and power factor correction in industrial equipment. Its 18-pin PDIP form factor makes it popular for prototyping and education boards, while the 40 MHz DSP core handles real-time control loops that would overwhelm a standard 8-bit MCU.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | PDIP-18 |
| Factory Lead Time | 6Weeks |
| YTEOL | 8 |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ |
| Barrel Shifter | YES |
| Bit Size | 16 |
| Boundary Scan | NO |
| Clock Frequency-Max | 40MHz |
| Format | FIXED POINT |
| Internal Bus Architecture | MULTIPLE |
| JESD-30 Code | R-PDIP-T18 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| On Chip Program ROM Width | 24 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | DIP18,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Qualification Status | Not Qualified |
| ROM Programmability | FLASH |
| Screening Level | TS 16949 |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 4.5V |
| Supply Voltage-Nom | 5V |
| Surface Mount | NO |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | 3A991.A.2 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What clock frequency and supply voltage options does the DSPIC30F2011-20I/P support?
The DSPIC30F2011-20I/P runs at up to 40 MHz from a 5 V supply, delivering approximately 30 MIPS of throughput; it also operates at a reduced 7.5 MHz from a 2.5 V supply for power-sensitive applications, providing designers with a dual operating mode to balance performance and energy consumption.
How does the hardware barrel shifter in DSPIC30F2011-20I/P accelerate motor-control firmware?
The hardware barrel shifter performs multi-bit shifts in a single clock cycle rather than requiring software loop iterations; this is critical in motor-control algorithms like Clarke and Park transforms where 16-bit fixed-point scaling operations must complete within the 40 MHz ISR budget of a 20 kHz current-control loop.
Is the DSPIC30F2011-20I/P in a breadboard-compatible package for rapid prototyping?
Yes, the DSPIC30F2011-20I/P uses an 18-pin 0.3-inch wide PDIP package with 2.54 mm through-hole lead pitch, making it directly insertable into standard solderless breadboards and perfboard for rapid prototype development without requiring SMT reflow equipment.
When would a designer choose DSPIC30F2011-20I/P over a dsPIC33 series device for a cost-sensitive application?
The DSPIC30F2011-20I/P is typically less expensive and uses a 5 V supply compatible with legacy 5 V sensor and gate-drive ecosystems; the dsPIC33 series offers 3.3 V operation and higher performance up to 70 MIPS, so DSPIC30F2011 is preferred when a designer needs a drop-in upgrade to an existing 5 V embedded control board without redesigning the analog front end.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $5.2400 | $5.24 |
| 25+ | $5.0200 | $125.50 |
| 100+ | $3.9700 | $397.00 |
| 1000+ | $3.6400 | $3640.00 |
| 5000+ | $3.4800 | $17400.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”