DSPIC33FJ32MC302-I/MM Microchip Integrated Circuit (Quad Flat No-Lead) In Stock

Microchip dsPIC33FJ32MC302 is a 16-bit digital signal controller with a 40 MHz DSC core, 32 KB Flash, hardware floating point, and motor control PWM with encoder interface. Available in QFN-28 package, RoHS compliant, in stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified May 2026
Package / Visual Reference
DSPIC33FJ32MC302-I/MMQuad Flat No-Lead
Quick Facts
Manufacturer
Microchip
Package
Quad Flat No-Lead
Pin Count
28
Lifecycle
ACTIVE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 16-bit dsPIC DSC core at 40 MHz with hardware barrel shifter and IEEE 754 floating-point support
  • Dedicated motor control PWM with 6-output complementary mode and quadrature encoder interface for precision drive applications
  • Integrated 12-bit ADC with 9 channels enabling simultaneous motor current and voltage sampling in real-time control loops

Applications

The dsPIC33FJ32MC302 targets embedded motor control applications including BLDC, PMSM, and AC induction drives where the dedicated PWM engine and hardware DSP accelerate field-oriented control algorithms. Its 40 MHz core with hardware floating point simplifies torque and speed loop implementation without sacrificing real-time responsiveness. The compact QFN-28 footprint suits space-constrained appliance motor controllers, power tool drives, and fan and pump control boards.

Specifications

Pbfree CodeYes
Manufacturer Package CodeQFN-S-28
Factory Lead Time6Weeks
YTEOL8
Barrel ShifterYES
Bit Size16
Boundary ScanYES
Clock Frequency-Max40MHz
FormatFLOATING POINT
Integrated CacheNO
Internal Bus ArchitectureMULTIPLE
JESD-30 CodeS-PQCC-N28
JESD-609 Codee3
Low Power ModeYES
Number of DMA Channels8
Number of External Interrupts3
Number of Serial I/Os2
Number of Timers5
On Chip Data RAM Width16
On Chip Program ROM Width24
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeLCC28,.24SQ,25
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
ROM ProgrammabilityFLASH
Screening LevelTS 16949
Supply Current-Max76mA
Supply Voltage-Max3.6V
Supply Voltage-Min3V
Supply Voltage-Nom3.3V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.65mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)40
uPs/uCs/Peripheral ICs TypeDIGITAL SIGNAL PROCESSOR, CONTROLLER
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCN3A991.A.2
HTS Code8542.31.00.01
Country of OriginThailand

Datasheet

DSPIC33FJ32MC302-I/MM Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What PWM capabilities does the dsPIC33FJ32MC302 provide for motor drive designs?

The dsPIC33FJ32MC302 features a dedicated motor control PWM module with 6 complementary output channels, programmable dead-time insertion, and fault override inputs, supporting BLDC and PMSM field-oriented control at switching frequencies up to 1 MHz for compact high-efficiency inverter designs.

How does the 40 MHz dsPIC33FJ32MC302 compare to a standard 8-bit MCU for running PID motor control loops?

The dsPIC33FJ32MC302 executes 16-bit DSP multiply-accumulate operations in a single clock cycle at 40 MHz, enabling PID loop execution in under 5 µs versus tens of microseconds on an 8-bit MCU, which translates directly to higher bandwidth current control and smoother torque response in servo applications.

What on-chip ADC does the dsPIC33FJ32MC302 offer for current sensing in motor control?

The dsPIC33FJ32MC302 integrates a 12-bit ADC with up to 9 input channels and simultaneous sampling capability, allowing phase current measurements at each PWM period with less than 1 µs conversion time, critical for accurate field-oriented control vector calculations.

For a compact appliance motor driver, how small is the QFN-28 package footprint of the dsPIC33FJ32MC302-I/MM?

The dsPIC33FJ32MC302-I/MM uses a 6 mm x 6 mm QFN-28 package with 0.65 mm pin pitch, a compact footprint that fits into tight appliance PCB layouts while providing 21 GPIO pins, UART, SPI, and I2C communication alongside the full motor control peripheral set.

What is the Flash program memory size, and is it sufficient for a complete sensorless BLDC firmware?

The dsPIC33FJ32MC302 offers 32 KB of Flash program memory and 2 KB of SRAM, providing enough space to store a full sensorless BLDC control algorithm with back-EMF zero-crossing detection, speed PI regulator, and UART diagnostic interface without requiring external memory.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy