Integrated Circuit

The LTC6910-2CTS8#TRMPBF is a digitally controlled programmable gain amplifier (PGA) from Analog Devices, offering gains from 0 to 64 V/V with a 13 MHz bandwidth and 55 dB minimum CMRR in an 8-pin SOT-23 package. Designed for precision analog signal conditioning in space-constrained portable and industrial applications.

The LTC1992-2HMS8#TRPBF is a fully differential amplifier with fixed gain of 2 from Analog Devices, featuring 60 dB CMRR and 4 mV input offset voltage in an SOIC-8 package. It converts single-ended signals to differential outputs for ADC driving. Available from stock worldwide with competitive pricing.

The LTC2877IMSE#PBF is a 60 V fault-protected RS-485/PROFIBUS transceiver from Analog Devices, supporting EIA-485 and EIA-422 standards with differential Schmitt trigger inputs and a 3 V to 5 V logic supply range. Housed in an MSOP-8 package, it delivers robust industrial bus communication with overvoltage surge protection.

The LT3955EUHE#PBF is a high-efficiency buck-boost LED driver IC from Analog Devices (Linear Technology) switching at 1 MHz, capable of driving up to 12 LED segments in a 36-pin QFN package. It supports wide input voltage ranges with programmable current regulation for consistent LED brightness. Suited for automotive and industrial LED lighting designs requiring stable output despite fluctuating supply voltages.

Surge Suppressors 140V High Efficiency Sw. Surge Stopper

Digital Isolator CMOS 3-CH 150Mbps 16-Pin SOIC W T/R

A 7-BIT CURRENT DAC FOR POWER CO

Analog Devices LT3085IMS8E#TRPBF is an adjustable positive LDO linear regulator with 0 V to 36 V output range and 500 mA output current in an 8-pin MSOP with exposed pad. It achieves 0.275 V typical dropout and is automotive-grade for use in vehicle and industrial systems. Paralleling capability enables higher current delivery without additional balancing circuitry.

LTC6253IMS8#PBF is a dual high-speed rail-to-rail input/output operational amplifier from Analog Devices, with 800 MHz gain-bandwidth product and only 3.5 mA supply current per amplifier. It features a common-mode rejection ratio of 105 dB typical and 0.7 µA average bias current in a compact MSOP-8 package. Ideal for ADC driver circuits, active filters, and high-frequency signal conditioning in portable and industrial instrumentation.

Differential Amplifiers Gain of 1 Fully Differential In/Out Amplifier

Fully differential input/output operational amplifier with a fixed gain of 10, 60 dB CMRR, and 2.5 mV max offset voltage. Ideal for ADC driver and signal conditioning applications in an 8-pin MSOP package with worldwide availability.

Differential Amplifiers Gain of 1 Fully Differential In/Out Amplifier

IC ADC 16BIT PAR/SRL 25MSP 52QFN

Differential Amplifiers Gain of 2 Fully Differential In/Out Amplifier

LFCSP-16

The LTC1992-5CMS8#PBF is a fully differential input/output amplifier from Analog Devices with a fixed gain of 5. It delivers 60 dB typical CMRR and 2500 µV maximum input offset voltage in a compact MSOP-8 package. Available from stock with worldwide shipping.

DSP 16bit/32bit 200MHz Automotive 88-Pin LFCSP EP Tray

Analog Comparators RR Fast 2.5-5.5V SGL-Supply TTL/CMOS

Differential Amplifiers Fully Differential In/Out Amplifier

Linear Voltage Regulators Dual 300mA Fixed Out QOD Lo Noise Hi PSRR

Analog Devices LT1999IMS8-50F is a high-voltage bidirectional current sense amplifier engineered for pin-level FMEA robustness. It features a 105dB CMRR and operates with input offset voltage up to 1500µV. Packaged in 8-pin SOIC, it suits power monitoring in harsh industrial environments.

DUAL, MULTI-BAND 16-BIT, 12GSPS

2-Channel Dual ADC Pipelined 65Msps 16-bit Serial 52-Pin QFN EP Tube

Clock Generators & Support Products Long Timer, Low Frequency Oscillator

The LT4295HUFD#PBF is a PoE++ PD (Powered Device) forward/flyback controller IC from Analog Devices, supporting IEEE 802.3bt Type 3/4 power delivery up to 90 W. It accepts 40 V nominal PoE input up to 60 V maximum and integrates current-mode control for high-efficiency isolated DC/DC conversion. Available in a 28-lead QFN package from global authorized distributors.

Interface - Specialized L V I2C/SMBus Accelerator

LT3030EFE#TRPBF is a dual-output adjustable low-dropout linear regulator from Analog Devices, providing 750 mA and 250 mA outputs with a typical dropout voltage of only 0.3 V. It features low noise micropower operation and supports input-to-output differential voltages up to 18.78 V in a 20-pin TSSOP package.

LDO Regulator Pos 0V to 36V 0.5A Automotive 6-Pin DFN EP T/R

42V, 4A Synchronous Step-Down Silent Switcher with 2.5μA Quiescent Current

The LTC6400IUD-20#PBF is a 3 GHz low-noise, low-distortion differential amplifier from Analog Devices with 20 dB fixed gain, 65 dB CMRR, and a 2 mV maximum input offset voltage. It is packaged in a 16-pin QFN for RF and ADC driver applications. Available from stock with worldwide shipping.

Analog Front End - AFE Optical AFE for Health Monitoring

Prescaler program 5-Bit Counter SMT, DC - 2.2 GHz

Switching Voltage Regulators 18V, 5A Synchronous Buck-Boost DC/DC Converter

Resistor Networks & Arrays Matched Resistor Network, Dual 1.25k/5k

Analog Devices LT3080EMS8E#PBF, LDO Regulator, 1.1A Adjustable, 0 → 36 V, 1% 8-Pin, MSOP

ARM Microcontrollers - MCU 512kB ARM Cortex ULP MCU

LTC4162EUFD-FFS#PBF is a 35 V / 3.2 A multi-cell LiFePO4 step-down battery charger IC from Analog Devices with integrated PowerPath management and I2C telemetry in a 28-pin QFN package. It suits industrial battery backup, portable equipment, and energy storage applications requiring smart, monitored charging with system load sharing.

Charge Pump STPUP 3.3V 80mA 8-Pin MSOP T/R

Conv DC-DC 3.6V to 20V Step Down Dual-Out 1.5V to 12V 2A/2A uModule 25-Pin BGA Tray

ADE7757 is an energy metering IC from Analog Devices with an integrated oscillator, designed for single-phase power measurement in residential and commercial electricity meters. It outputs calibrated active energy pulses with better than 0.1% accuracy over a 500:1 dynamic range. Available from stock worldwide with competitive pricing.

Charge Pump STPUP 5V 100mA 8-Pin MSOP Tube

Switching Voltage Regulators High Input Voltage, Boost, Flyback, SEPIC, and Inverting Converter

Switching Voltage Regulators 3A Wide Vin, Low Noise Buck-Boost DC/DC Converter

Analog Devices LTC2645IMS-L12#PBF is a quad-channel 12-bit PWM-input to voltage-output DAC with an integrated 10 ppm/°C internal reference in MSOP-16 package. Enables simple microcontroller PWM-to-analog conversion for precision control and calibration applications.

LDO Voltage Regulators 3.3V Low Dropout Regulator

Analog Devices LTC4162EUFD-LAD#PBF is a multi-cell lithium-ion step-down battery charger supporting up to 35 V input and 3.2 A charge current. It integrates PowerPath management and I2C telemetry for real-time monitoring of voltage, current, and temperature. Available in a compact 28-pin QFN package for industrial and portable power management systems.

RS-422/RS-485 Interface IC Diff Drvr & Rcv Pair w/ Fail-Safe Rcv O

Analog Devices LTC3119HFE#PBF is a synchronous buck-boost DC/DC converter supporting 2.5 V to 18 V input and 5 A output current. It delivers adjustable output from 0.8 V to 18 V with current-mode PWM control for stable regulation. Available from global distributors with fast shipping.

Forward Converter Regulator Positive, Isolation Capable Output Step-Up/Step-Down DC-DC Controller IC 38-TSSOP-EP

The LTC4311IDC#TRMPBF is an I2C and SMBus rise-time accelerator from Analog Devices that actively drives SDA and SCL lines high to speed up edge transitions on heavily loaded buses. It operates from 2.7 V to 5.5 V and requires no I2C address or configuration, housed in a 6-pin DFN package. Suitable for multi-master I2C buses with large capacitive loads.