Integrated Circuit

Surge Suppressors 100V OV, UV, OC and Reverse Supply Protection Controller with -3mV Reverse Threshold

Comparator Dual ±5.5V/11V 8-Pin SOIC N T/R

Active Filter Single UNIV 2nd Order 5MHz 8-Pin MSOP Tube

DC/DC Cntrlr Single-OUT Sync Buck 900kHz Automotive 24-Pin TSSOP EP Tube

Precision Amplifiers 80V Over-the-top Opamp

LDO Voltage Regulators -20V, 500mA Ultralow Noise/PSRR LDO

Monostable Multivibrator ONE SHOT with Rising Edge Trigger, Non-Retriggerable

Analog to Digital Converters - ADC 16-bit 60Hz I2C Single-Ended Delta Sigma ADC

LT1210IR#PBF is a high-power current-feedback operational amplifier from Analog Devices capable of delivering 1.1 A output current at 35 MHz bandwidth and 900 V/µs slew rate. With 62 dB typical CMRR, it is designed for cable driving, video distribution, and high-speed power amplification requiring large output swing and fast response.

100mA, Low Noise, LDO Micropower Regulators in TSOT-23

SOIC-16

Analog Comparators uPower Dual Comparator + 400mV Ref

LT8650SHV-1#PBF is a Analog Devices integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides manufacturer-backed specifications for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and worldwide shipping.

Power Management Specialized - PMIC Prec. uPower RMS to DC converter

Current Sense Amplifiers Current Sense Amp with Comparator and 400mV Ref

Analog Devices LTC6084HMS8#TRPBF is a dual, rail-to-rail input/output general-purpose op-amp operating from 1.8 V to 5.5 V supply, featuring 80 dB CMRR and 0.75 nA bias current for low-power precision signal conditioning in automotive applications, housed in an 8-pin MSOP package.

Analog Devices LTC6084CMS8#PBF is a dual general-purpose rail-to-rail input/output operational amplifier rated for 5.5 V automotive-grade operation. It offers 80 dB typical CMRR and an ultra-low input bias current of 40 fA typical. Packaged in an 8-pin MSOP for compact, high-accuracy analog designs.

LDO Voltage Regulators -20V, 500mA Ultralow Noise/PSRR LDO

LED Lighting Drivers 60V Synchronous Boost LED Controller

The LTC6084HMS8#PBF is a dual rail-to-rail input/output general-purpose operational amplifier from Analog Devices, operating from a 5.5 V maximum supply with a maximum input bias current of 0.75 nA. It achieves 80 dB typical CMRR and a 1.1 mV maximum input offset voltage in an automotive-grade 8-pin MSOP package suited for precision signal conditioning.

Op Amp Quad Micropower Amplifier R-R I/O ±22V/44V Automotive 16-Pin DFN EP Tube

Operational Amplifiers - Op Amps 36V, Low Noise Zero- Drift Op Amplifier

RS-422/RS-485 Interface IC 3.3V Full-Duplex 20Mbps RS485 Transceiver w/ Enables

Low Dropout Regulator

The LTC6258HDC#TRMPBF is a single rail-to-rail input/output op-amp with 1.3 MHz bandwidth and only 23 µA quiescent current. It features low input offset voltage and high CMRR of 95 dB typical. Supplied in a compact 6-pin DFN package for space-constrained designs.

LTC4359IS8#PBF

Digital to Analog Converters - DAC 12-BIT No Reference

Op Amp Single Precision Amplifier R-R I/O ±2.5V/5V Automotive 5-Pin TSOT T/R

Accelerometers Low Noise 50kHz 500g 1-axis accel

Analog Devices LTM8055EY-1#PBF is a 36 V input, 8.5 A buck-boost µModule regulator with output voltage programmable from 1.2 V to 36 V. It integrates switching controller, power switches, inductor, and passives in a compact LGA package. Available in stock worldwide with fast shipping for demanding power supply designs.

Analog to Digital Converters - ADC 12-Bit, 3.5 Msps Serial ADC Unipolar

Precision Amplifiers Over-the-Top uP R-to-R I/O OA

LDO Voltage Regulators -20V, 500mA Ultralow Noise/PSRR LDO

Op Amp Dual GP R-R I/O 5.5V Automotive 8-Pin MSOP T/R

RF Detector RMS pow Detector SMT, DC - 3.9 GHz

Operational Amplifiers - Op Amps 36V, Low Noise Zero-Drift Operational Amplifier

LTC4367HMS8#TRPBF is a 100 V overvoltage, undervoltage, and reverse supply protection controller with a 32 ms turn-on delay and adjustable thresholds in an 8-pin SOIC package. It controls an external MOSFET to disconnect loads during fault conditions, protecting downstream circuitry in high-voltage industrial and automotive power systems.

LTC2058IMSE#PBF is a 36V zero-drift operational amplifier featuring ultra-low noise and rail-to-rail output. With a common-mode rejection ratio of 150 dB and bias current of 0.0001 µA, it delivers precision signal conditioning. Available from Analog Devices with worldwide shipping.

Precision Amplifiers Quad Precision 18MHz Low noise CMOS Op Amp

ADE7758 is a Analog Devices Integrated Circuit for embedded systems, signal routing, communication interfaces, and control electronics. It combines 0°C to 0°C with Small Outline Packages with 24 pins. FindMyChip supports technical sourcing, stock checks, and worldwide shipping for this part.

Surge Suppressors 100V OV, UV and Reverse Supply Protection Controller with 0.5ms On Delay

LDO Voltage Regulators 3.3/5Vin 2A Ultra Low Noise LDO Fixed

LTC6603CUF#PBF is a dual-channel, 2.5 MHz cutoff low-pass filter IC from Analog Devices in a 24-pin QFN package with 1.6 kΩ input impedance and only 0.75 mm profile height. It targets RF signal conditioning, data acquisition front-ends, and anti-aliasing filter applications requiring precise, matched filter responses.

Digital Potentiometer ICs 128tap, Quad DigiPOT, NVM, SPI

Operational Amplifiers - Op Amps Dual Low Voltage Micropower CMOS OpAmp

I2C Interface 3.6V 24-Pin LFCSP EP T/R

IC XOR/XNOR GATE 16SMT

Hot Swap Voltage Controllers Dual CompactPCI Hot Swap Controller

The LTC2850CMS8#PBF is a high-speed RS-422/RS-485 line transceiver from Analog Devices, supporting data rates up to 40 Mbps with a differential Schmitt trigger input. Packaged in a compact 8-pin MSOP, it operates from a single 3.3 V or 5 V supply with a maximum supply voltage of 7 V.

Analog Devices LTC2341IUH-16#PBF is a dual 16-bit SAR ADC with 666 ksps per channel throughput and differential SoftSpan input configuration. It supports a wide input common-mode range with a 2.5 V analog input maximum and 0.0488% max linearity error in a compact 10-pin QFN package. Available worldwide for high-speed precision data acquisition systems.