Integrated Circuit

5Bit 1dBStep 31dB 3GHz 16-Pin LFCSP EP T/R

Op Amp Dual Low Noise Amplifier R-R I/O ±15V/30V 8-Pin LFCSP EP T/R

Analog to Digital Converters - ADC 24-Bit 250ksps 20uS Settling

Active Filters 1.4nV/Rt.Hz 180MHz Filt Building Block

Analog Devices LTC4162IUFD-SAD#PBF is a multi-cell lithium-ion step-down battery charger with 35 V input, 3.2 A charge current, PowerPath management, and I2C telemetry. Housed in a compact 28-pin QFN package for portable and industrial power designs. Available with worldwide shipping.

Differential Amplifiers High BW, Dual Diff Amp

The LTC6242HVCDHC#PBF is a quad precision 18 MHz low-noise CMOS operational amplifier from Analog Devices featuring a maximum input offset voltage of 650 µV, a typical CMRR of 105 dB, and rail-to-rail output. It is ideal for precision signal conditioning and sensor amplification in industrial and instrumentation applications.

Infrared Receivers 4Mbps Infrared Receiver

Accelerometer Single ±500g 5V 4mV/g 32-Pin LFCSP EP T/R

Operational Amplifiers - Op Amps Single 2 A Zero-Drift Operational Amplifier

Active Filters 1.4nV/Rt.Hz 180MHz Filt Building Block

Reliable low cost voltage monitor with reset output Suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V power supply voltages Reset threshold levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V typical Active high and low push-pull output choices: ADM1810, ADM1812, ADM1815, and ADM1817 Open-drain with internal pull-up resistor output choices: ADM1811, ADM1813, ADM1816, and ADM1818 Can be used with a manual push-button to generate a reset: ADM1813, ADM1818 Initialization of microproc

Precision Amplifiers Quad Precision 18MHz Low noise CMOS Op Amp

Digital to Analog Converters - DAC Dual 12-bit Parallel IOUT IC

Current Sense Amplifiers Current Sense Amplifier

Switching Voltage Regulators uPMU V+/V- sw reg for bipolarADC/DAC/AMP

Analog Devices ADUCM360 is a precision analog microcontroller integrating dual 24-bit sigma-delta ADCs with an ARM Cortex-M3 processor in a QFN package. Designed for low-power precision measurement with on-chip PGA, excitation current sources, and 128 KB flash. Available from global distributors with worldwide shipping.

Analog to Digital Converters - ADC 12-bit, 2-ch 14ksps I2C SAR ADC

Digital Potentiometer ICs 1024 tap, 1% digiPOT with SPI interface

Phase Locked Loops - PLL PLL + VCO 1610-2080MHz /2 x2

Precision Amplifiers Dual uP 1MHz R-to-R Op Amp

LDO Voltage Regulators CMOS LDO 6.5V 1A

LDO Voltage Regulators 1A Hi PSRR FT L DO 1.8Vo

LDO Voltage Regulators 1A Hi PSRR FT L DO 2.5Vo

LTC1560-1IS8 is a continuous-time, low-noise elliptic lowpass filter IC from Analog Devices with selectable 1 MHz or 500 kHz cutoff frequency in an SO-8 package. Key specs include ±5 V supply operation, pin-selectable cutoff, and deep stopband attenuation for anti-aliasing in high-speed data acquisition systems. Available from stock with worldwide shipping.

VCO Oscillators VCO SMT with Fo/2, 9.05 - 10.15 GHz

Precision Amplifiers Dual uP 1MHz R-to-R Op Amp

SMT, 6 PIN

Infrared Receivers 4Mbps Infrared Receiver

IRDA TX/RX 4Mbps 5V 8-Pin SOIC N Tube

Analog Devices LTC2328CMS-18#PBF is an 18-bit, 1 Msps successive approximation ADC with true bipolar ±10 V input range and SPI serial interface in MSOP-16 package. Achieves 0.0019% linearity error and 0.527 µs conversion time. Available from stock with worldwide shipping.

Precision Amplifiers Dual uP 1MHz R-to-R Op Amp

Precision Amplifiers Dual Low Noise OA (Av = 1)

Supervisory Circuits RESET GENERATOR I.C.

Analog Devices ADP7142 is a 40V input, 200mA LDO linear regulator with 3.3V fixed output, 420mV maximum dropout, in 6-pin SOT-23 package, covering -40°C to +125°C for industrial and high-voltage analog supply applications.

LTC1992IMS8#PBF Analog Devices, 2-Channel Differential Amplifier 4MHz Rail to Rail Input/Output 8-Pin MSOP

1.5A, Low Noise, Fast Transient Response LDO Regulators

Analog Devices LTC2877HMSE#PBF is a 60 V fault-protected RS-485/RS-422 transceiver supporting PROFIBUS and operating from 3 V or 5 V logic supplies. It features differential Schmitt trigger inputs and a single driver/receiver channel in a small outline package. The device delivers robust industrial communication with ±60 V bus fault protection for harsh environments.

LDO Voltage Regulators 200mA Negative Vout LDO

The LTC2877CDD#PBF is a full-duplex RS-485/RS-422 and PROFIBUS transceiver supporting data rates up to 20 Mbps, housed in a compact 10-pin DFN package. It operates from either a 3.3 V or 5 V supply and integrates a differential Schmitt-trigger receiver. Suited for industrial fieldbus networks, PLC interfaces, and high-speed differential serial communication links.

LTC6930CMS8-5.00#PBF is a precision silicon oscillator from Analog Devices operating at a nominal 5 MHz with selectable output frequencies down to 32.768 kHz, CMOS output, and 5 pF output load. Packaged in an 8-pin MSOP, it suits low-power timing and clocking applications across industrial and consumer designs.

Precision Amplifiers Dual uP 1MHz R-to-R Op Amp

Analog Comparators Nanopower Comp w/ Ref

42V, 2A/3A Peak Synchronous Step-Down Regulator with 2.5µA Quiescent Current

Analog to Digital Converters - ADC 16-bit, 25Msps, 1.8V Low-Power Dual ADC, Serial LVDS Outputs

IC OPAMP ZERO-DRIFT 2 CIRC 10DFN

Active Filters Active RC Quad Universal Filter

The LTC3410ESC6-1.5#TRMPBF is a 300 mA synchronous step-down switching regulator from Analog Devices operating at 2.25 MHz with a fixed 1.5 V output and current-mode control. It accepts 2.5 V to 5.5 V input and fits ultra-compact SOT-23-6 designs for portable and wearable electronics.

Differential Amplifiers Gain of 2 Fully Differential In/Out Amplifier

Analog Switch ICs LatchupProof +12V +36V 1xSPDT